Unlock s7 Active AT&T, Done By. Z3XBOX

[ventaslaredo]

UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

Operation: Read Codes via Server
Selected model: SM-G930A
Software version: 29.5

Checking Login and Password... OK
Ballance: 35 crd.
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SAMSUNG-SM-G891A
Android version: 6.0.1
Product code: SM-G891AZGAATT
Phone version: G891AUCS2APL1
PDA version: G891AUCS2APL1
CSC version: G891AATT2APL1
CSC country code: USA
CSC sales code: ATT
HW version: REV0.5
Phone SN: R38J203ZW3L
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-12-01
RF cal date: 2017.02.03
IMEI: 358518072XXXXXX
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 69528392
NET lock: 86835152
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.29.5