Unlock samsung gt e2200 - GSM-Forum

KIKAJA · 05-13-2013, 10:30

Hi I have question about unlock samsung gt e2200.I dont hawe driver for this model and allways trying to find usb device.Is this model possible to unlock because on the pictures its diffrent model.
Thanks

aph · 05-14-2013, 16:24

I have the same problem bro

stetocina · 05-17-2013, 15:11

me to. I need driver.

Burnham · 05-24-2013, 09:49

What Is a Solution?
Nothing?!

Robi-K · 06-04-2013, 14:50

After a 3 our search I found the drivers. Can't upload them but the name is "Samsung Spreadtrum Driver"

dbarakov · 06-17-2013, 09:43

Selected model: E2200
Selected port: COM10 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM157
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI: 355254051445256
Phone HW: MP 0.600
Product code:
Sending NV... OK
Unlock done
Done with Samsung Tool v.14.5

Done with Samsung Tool v.14.5 10x z3x

csotika · 06-17-2013, 18:38

Here is the driver for that:

https://www.dropbox.com/s/ribn6cpv66...B%20Driver.rar

doktormobil · 06-18-2013, 10:32

Done with Samsung Tool v.14.7

Selected model: E2202
Selected port: COM168 SCI U2S Diag
Selected port speed: 921600
Waiting phone... detected COM169
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI: 355254052576646
Phone HW: MP 0.600
Product code:
Sending NV... OK
Unlock done
Done with Samsung Tool v.14.7

Done with Samsung Tool v.14.7

g-zona · 06-19-2013, 14:05

When I press read info I get this:

Selected model: E2200
Selected port: COM4 Z3X Box Serial Port
Selected port speed: 921600
Searching Samsung modem... detected COM247
Reading phone info...
Model: GT-E2200
Country code: SEE
Cal date: 01-03-2013 17:47:21
Factory SW: E2200XXMA1
Unique number: A19862D436483D9B
Memory phone: GD25Q64
IMEI: 35525405040845
Done with Samsung Tool v.14.7

But, when click on Unlock:

Selected model: E2200
Selected port: COM4 Z3X Box Serial Port
Selected port speed: 921600
Waiting phone... not found
Done with Samsung Tool v.14.7

Driver downloaded from SPD Driver last Ver.rar

Never mind i should listen to myself! RTFM FCTC! Its written in the manual:

Connect phone in flash mode (Press "OK" button (Center of navigation buttons module) and connect usb cabe).

msnv · 07-12-2013, 16:03

First...
SPD Driver download from: MediaFire

Then...
Turn off your E2200 ...
Press the middle-center button and plug the USB cable ...
(windows 7 unknown device) ...
Right click on My Computer, Manager, Device Manager ...
Right click on the Unknown device,
Update driver...,
Browse computer for driver software --> Browse
(and find the location where you unpacked)
"Spreadtrum Sci USB2Serial driver version 1.4.4.8".
When you install the driver,
Run Z3X 14.6,
mark the port SCI USB2Serial,
Click on the Unlock button,
Remove the phone from USB cable, remove battery,
and back insert battery...
Press down the center button and insert the USB cable
Waiting phone... detected COMxx,
release center button
and wait to finish unlock

Log:
Selected model: E2200
Selected port: COM41 SCI USB2Serial
Selected port speed: 921600
Waiting phone... detected COM41
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI: 35525405xxxxxxxx
Phone HW: MP 0.600
Product code:
Sending NV... OK
Unlock done
Done with Samsung Tool v.14.6

dr.chinezu · 07-14-2013, 03:07

Selected model: E2202
Selected port: COM22 SCI USB2Serial
Selected port speed: 921600
Waiting phone... detected COM22
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Checking NV... OK
IMEI: 355254052644675
Phone HW: MP 0.600
Product code:
Please wait, calculating codes... OK (time - 00:00:15)
Freeze code: 09246379
NET lock: 27468538
Sub lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool v.14.8

NWJ · 10-16-2013, 05:51

im using windows 7 64bit no luck help anyone

renaissance2k · 11-08-2013, 15:09

If anyone have problem with Reading NV..Error.. just make full factory *2767*3855# and try again!!

DUALSIMGSM1 · 12-16-2013, 13:10

thank's good job it works for me

jordachi · 12-17-2013, 11:54

Thank you worked perfectly !

05-13-2013, 10:30	#1 (permalink)
KIKAJA Insane Poster Join Date: Oct 2007 Location: Croatia Posts: 84 Member: 616480 Status: Offline Thanks Meter: 7	Unlock samsung gt e2200 Hi I have question about unlock samsung gt e2200.I dont hawe driver for this model and allways trying to find usb device.Is this model possible to unlock because on the pictures its diffrent model. Thanks

06-19-2013, 14:05	#9 (permalink)
g-zona No Life Poster Join Date: Sep 2004 Location: HR Age: 48 Posts: 749 Member: 80391 Status: Offline Sonork: 100.1601620 Thanks Meter: 66	When I press read info I get this: Selected model: E2200 Selected port: COM4 Z3X Box Serial Port Selected port speed: 921600 Searching Samsung modem... detected COM247 Reading phone info... Model: GT-E2200 Country code: SEE Cal date: 01-03-2013 17:47:21 Factory SW: E2200XXMA1 Unique number: A19862D436483D9B Memory phone: GD25Q64 IMEI: 35525405040845 Done with Samsung Tool v.14.7 But, when click on Unlock: Selected model: E2200 Selected port: COM4 Z3X Box Serial Port Selected port speed: 921600 Waiting phone... not found Done with Samsung Tool v.14.7 Driver downloaded from SPD Driver last Ver.rar Never mind i should listen to myself! RTFM FCTC! Its written in the manual: Connect phone in flash mode (Press "OK" button (Center of navigation buttons module) and connect usb cabe). Last edited by g-zona; 06-19-2013 at 14:10.

07-12-2013, 16:03	#10 (permalink)
msnv Freak Poster Join Date: Jan 2008 Location: Belgrade - Serbia Age: 45 Posts: 181 Member: 669559 Status: Offline Thanks Meter: 156	Samsung GT-E2200 unlock done First... SPD Driver download from: MediaFire Then... Turn off your E2200 ... Press the middle-center button and plug the USB cable ... (windows 7 unknown device) ... Right click on My Computer, Manager, Device Manager ... Right click on the Unknown device, Update driver..., Browse computer for driver software --> Browse (and find the location where you unpacked) "Spreadtrum Sci USB2Serial driver version 1.4.4.8". When you install the driver, Run Z3X 14.6, mark the port SCI USB2Serial, Click on the Unlock button, Remove the phone from USB cable, remove battery, and back insert battery... Press down the center button and insert the USB cable Waiting phone... detected COMxx, release center button and wait to finish unlock Log: Selected model: E2200 Selected port: COM41 SCI USB2Serial Selected port speed: 921600 Waiting phone... detected COM41 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI: 35525405xxxxxxxx Phone HW: MP 0.600 Product code: Sending NV... OK Unlock done Done with Samsung Tool v.14.6

12-17-2013, 11:54	#15 (permalink)
jordachi Freak Poster Join Date: Mar 2008 Location: Romania Posts: 296 Member: 730652 Status: Offline Thanks Meter: 74	samsung e2200 unlock Thank you worked perfectly !

05-14-2013, 16:24	#2 (permalink)
aph Junior Member Join Date: Mar 2004 Age: 49 Posts: 6 Member: 59107 Status: Offline Thanks Meter: 0	I have the same problem bro

05-17-2013, 15:11	#3 (permalink)
stetocina Freak Poster Join Date: Jun 2003 Location: www.elektronika-s.hr Age: 53 Posts: 306 Member: 30623 Status: Offline Thanks Meter: 68	me to. I need driver.

05-24-2013, 09:49	#4 (permalink)
Burnham Junior Member Join Date: Oct 2009 Location: Hun Posts: 29 Member: 1133202 Status: Offline Sonork: There isn't Thanks Meter: 1	What Is a Solution? Nothing?!

06-04-2013, 14:50	#5 (permalink)
Robi-K Freak Poster Join Date: May 2007 Location: Romania Posts: 217 Member: 513613 Status: Offline Thanks Meter: 25	After a 3 our search I found the drivers. Can't upload them but the name is "Samsung Spreadtrum Driver"

06-17-2013, 09:43	#6 (permalink)
dbarakov Registered User Join Date: Oct 2005 Location: bulgaria Posts: 287 Member: 189682 Status: Offline Thanks Meter: 48	Selected model: E2200 Selected port: COM10 Z3X BOX Serial Port Selected port speed: 921600 Waiting phone... detected COM157 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI: 355254051445256 Phone HW: MP 0.600 Product code: Sending NV... OK Unlock done Done with Samsung Tool v.14.5 Done with Samsung Tool v.14.5 10x z3x

06-17-2013, 18:38	#7 (permalink)
csotika Freak Poster Join Date: Jun 2007 Location: Hungary Posts: 246 Member: 521590 Status: Offline Thanks Meter: 56	Here is the driver for that: https://www.dropbox.com/s/ribn6cpv66...B%20Driver.rar

06-18-2013, 10:32	#8 (permalink)
doktormobil Registered User Join Date: Mar 2006 Location: Hungary Age: 50 Posts: 291 Member: 245884 Status: Offline Thanks Meter: 21	Done with Samsung Tool v.14.7 Selected model: E2202 Selected port: COM168 SCI U2S Diag Selected port speed: 921600 Waiting phone... detected COM169 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI: 355254052576646 Phone HW: MP 0.600 Product code: Sending NV... OK Unlock done Done with Samsung Tool v.14.7 Done with Samsung Tool v.14.7

07-14-2013, 03:07	#11 (permalink)
dr.chinezu Crazy Poster Join Date: Jan 2011 Location: romania Age: 43 Posts: 53 Member: 1499575 Status: Offline Thanks Meter: 6	Selected model: E2202 Selected port: COM22 SCI USB2Serial Selected port speed: 921600 Waiting phone... detected COM22 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Checking NV... OK IMEI: 355254052644675 Phone HW: MP 0.600 Product code: Please wait, calculating codes... OK (time - 00:00:15) Freeze code: 09246379 NET lock: 27468538 Sub lock: 00000000 SP lock: 00000000 CP lock: 00000000 SIM lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool v.14.8

10-16-2013, 05:51	#12 (permalink)
NWJ Freak Poster Join Date: Jan 2012 Location: Jamaica Posts: 209 Member: 1710758 Status: Offline Thanks Meter: 55	im using windows 7 64bit no luck help anyone

11-08-2013, 15:09	#13 (permalink)
renaissance2k Junior Member Join Date: Aug 2007 Location: hungary Posts: 35 Member: 575878 Status: Offline Thanks Meter: 2	If anyone have problem with Reading NV..Error.. just make full factory 27673855# and try again!!

12-16-2013, 13:10	#14 (permalink)
DUALSIMGSM1 Crazy Poster Join Date: Jan 2011 Location: Bucharest Age: 43 Posts: 53 Member: 1501026 Status: Offline Sonork: 100.1660399 Thanks Meter: 2	thank's good job it works for me