100% Repair bricked baseband with last Redsn0w - GSM-Forum

frake50 · 06-18-2012, 13:01

i had one 3GS 32 GB MC141DN , was no IMEI -Wifi-bluetooth- firmaware, where it was happen when the owner try write Ipadbaseband as it is New model of baseband. so i give try and share here what i did and it is success 100%

1- Put Iphone DFU mode, and let Itunes write the firmware 5.1.1.. after itunes finish sending the first stage and it showing itunes verfying the software.. i pluged out the iphone from the PC and closed Itunes. ( iphone will hang on apple logo and install process bar.... from this stage i force it direct to go DFU mode again.

2- run Redsn0w last version, and select ios 5.1.1 and downgrade ipad option and do the rest as usual

3- after finish the process on the iphone it will not run, hang again with apple logo ( because no complete ipsw written on it )
4- i run Redsnow again to as step 2 again with same option ( it will not h arm your device doesnt matter how many time you do it ) to me i just do it 2 time to besure somethings will happen to the baseband firmware..

5- after finish i put the device in DFU mode again and let Itunes flash it again with stock 5.1.1 it finished with out any error and it can aktivated with its original simcard from DE T-Mobile, and unlock the baseband 05.16.05 via T-mobile siside as it is 2 years old..

all thanks and geridet goes to DEV team.

YoungSokattra · 06-18-2012, 13:06

Be sure your tested set is 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…)

YoungSokattra · 06-18-2012, 13:08

The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

ribbentrop · 06-18-2012, 14:33

Quote:

Originally Posted by frake50

i had one 3GS 32 GB MC141DN , was no IMEI -Wifi-bluetooth- firmaware, where it was happen when the owner try write Ipadbaseband as it is New model of baseband. so i give try and share here what i did and it is success 100%

1- Put Iphone DFU mode, and let Itunes write the firmware 5.1.1.. after itunes finish sending the first stage and it showing itunes verfying the software.. i pluged out the iphone from the PC and closed Itunes. ( iphone will hang on apple logo and install process bar.... from this stage i force it direct to go DFU mode again.

2- run Redsn0w last version, and select ios 5.1.1 and downgrade ipad option and do the rest as usual

3- after finish the process on the iphone it will not run, hang again with apple logo ( because no complete ipsw written on it )
4- i run Redsnow again to as step 2 again with same option ( it will not h arm your device doesnt matter how many time you do it ) to me i just do it 2 time to besure somethings will happen to the baseband firmware..

5- after finish i put the device in DFU mode again and let Itunes flash it again with stock 5.1.1 it finished with out any error and it can aktivated with its original simcard from DE T-Mobile, and unlock the baseband 05.16.05 via T-mobile siside as it is 2 years old..

all thanks and geridet goes to DEV team.

3GS units manufactured week 34 of 2011 or later

vbrdll · 06-18-2012, 14:51

some 1 test this solution .???.

romey_singh2 · 06-18-2012, 15:03

is it true ..if yes then that is big bomb in iphone market

vbrdll · 06-18-2012, 15:24

i'm test it error 1013 ??? whith stockfirm 4.1 ????
not work ....

frake50 · 06-18-2012, 19:10

Quote:

Originally Posted by vbrdll

i'm test it error 1013 ??? whith stockfirm 4.1 ????
not work ....

4.1 stock you should PWN it with IREB before restore,, i used the stock 5.1.1

nicacel · 06-18-2012, 21:00

3GS two years old? ok so no working for device week34 2011 or later...

crossroads20 · 06-19-2012, 10:48

hope its has an images before and after the iphone was flashed.

bcprathna · 06-19-2012, 11:22

does 32GB contain new hardware??? as far i know only 8GB were contain... please tell me...

Fazil · 06-19-2012, 11:33

is it Working Anybody tested this solution !

ribbentrop · 06-19-2012, 11:35

This is bsht, not a solution .

eivelice · 06-19-2012, 13:23

2 years old means he just didn't know what to do before,

it is not new baseband and it is not damaged baseband but a software problem only.

it means his 3gs is 2010 model which is supported by downgrade and upgrade of baseband.

Paula12 · 06-19-2012, 16:05

Thanks for sharing.

06-18-2012, 13:01	#1 (permalink)
frake50 Freak Poster Join Date: Jan 2010 Posts: 356 Member: 1198842 Status: Offline Thanks: 5 Thanked 167 Times in 61 Posts	100% Repair bricked baseband with last Redsn0w i had one 3GS 32 GB MC141DN , was no IMEI -Wifi-bluetooth- firmaware, where it was happen when the owner try write Ipadbaseband as it is New model of baseband. so i give try and share here what i did and it is success 100% 1- Put Iphone DFU mode, and let Itunes write the firmware 5.1.1.. after itunes finish sending the first stage and it showing itunes verfying the software.. i pluged out the iphone from the PC and closed Itunes. ( iphone will hang on apple logo and install process bar.... from this stage i force it direct to go DFU mode again. 2- run Redsn0w last version, and select ios 5.1.1 and downgrade ipad option and do the rest as usual 3- after finish the process on the iphone it will not run, hang again with apple logo ( because no complete ipsw written on it ) 4- i run Redsnow again to as step 2 again with same option ( it will not h arm your device doesnt matter how many time you do it ) to me i just do it 2 time to besure somethings will happen to the baseband firmware.. 5- after finish i put the device in DFU mode again and let Itunes flash it again with stock 5.1.1 it finished with out any error and it can aktivated with its original simcard from DE T-Mobile, and unlock the baseband 05.16.05 via T-mobile siside as it is 2 years old.. all thanks and geridet goes to DEV team.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sim card sleep mode problem with 6130	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	05-22-2012 11:13
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	05-25-2009 16:29
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	07-23-1999 15:48
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	07-16-1999 00:44
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	06-09-1999 17:04

06-18-2012, 13:06	#2 (permalink)
YoungSokattra Freak Poster Join Date: Aug 2008 Posts: 115 Member: 830204 Status: Offline Thanks: 4 Thanked 23 Times in 17 Posts	Be sure your tested set is 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…)

06-18-2012, 13:08	#3 (permalink)
YoungSokattra Freak Poster Join Date: Aug 2008 Posts: 115 Member: 830204 Status: Offline Thanks: 4 Thanked 23 Times in 17 Posts	The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

06-18-2012, 14:51	#5 (permalink)
vbrdll Freak Poster Join Date: Jan 2006 Location: algeria Age: 35 Posts: 239 Member: 221245 Status: Offline Sonork: 100.1612390 Thanks: 3 Thanked 33 Times in 28 Posts	some 1 test this solution .???.

06-18-2012, 15:03	#6 (permalink)
romey_singh2 Freak Poster Join Date: Apr 2009 Posts: 413 Member: 1014826 Status: Offline Thanks: 54 Thanked 46 Times in 39 Posts	is it true ..if yes then that is big bomb in iphone market

06-18-2012, 15:24	#7 (permalink)
vbrdll Freak Poster Join Date: Jan 2006 Location: algeria Age: 35 Posts: 239 Member: 221245 Status: Offline Sonork: 100.1612390 Thanks: 3 Thanked 33 Times in 28 Posts	i'm test it error 1013 ??? whith stockfirm 4.1 ???? not work ....

06-18-2012, 21:00	#9 (permalink)
nicacel No Life Poster Join Date: Jan 2005 Location: Land of Lakes and Volcanoes Age: 40 Posts: 1,246 Member: 111014 Status: Offline Thanks: 323 Thanked 133 Times in 86 Posts	3GS two years old? ok so no working for device week34 2011 or later...

06-19-2012, 10:48	#10 (permalink)
crossroads20 Major Poster Join Date: Oct 2011 Posts: 43 Member: 1670761 Status: Offline Thanks: 7 Thanked 5 Times in 4 Posts	hope its has an images before and after the iphone was flashed.

06-19-2012, 11:22	#11 (permalink)
bcprathna Freak Poster Join Date: May 2004 Location: Phnom Penh Age: 33 Posts: 246 Member: 65548 Status: Offline Thanks: 1 Thanked 19 Times in 18 Posts	does 32GB contain new hardware??? as far i know only 8GB were contain... please tell me...

06-19-2012, 11:33	#12 (permalink)
Fazil Freak Poster Join Date: May 2006 Age: 33 Posts: 278 Member: 282757 Status: Offline Thanks: 81 Thanked 15 Times in 15 Posts	is it Working Anybody tested this solution !

06-19-2012, 11:35	#13 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 40 Posts: 3,021 Member: 40400 Status: Online Thanks: 166 Thanked 784 Times in 458 Posts	This is bsht, not a solution .

06-19-2012, 13:23	#14 (permalink)
eivelice Freak Poster Join Date: Nov 2006 Location: philippines Age: 31 Posts: 422 Member: 388962 Status: Offline Sonork: 100.1637202 Thanks: 338 Thanked 142 Times in 73 Posts	2 years old means he just didn't know what to do before, it is not new baseband and it is not damaged baseband but a software problem only. it means his 3gs is 2010 model which is supported by downgrade and upgrade of baseband.

06-19-2012, 16:05	#15 (permalink)
Paula12 Junior Member Join Date: Jun 2012 Posts: 8 Member: 1774069 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for sharing.