3GS no IMEI , bluetooth, wifi and modem - GSM-Forum

chimeto · 11-18-2011, 12:21

Hello I have big problem with 3GS, the phone was firmware 4.3.5 and I tried to jaillbreak and to install ipad baseband then phone freezed and I tried to update directly from itunes with version 5.0.1 and show me error occurred (-1) and phone freeze always in recovery mode.
Now I use redsn0w to input in DFU mode then restore with custom v4.1 and now phone is alive but no have IMEI, wifi, bluetooth and modem.
I'm sure in 100% it's NOT HARDWARE, it's software problem because phone was working.

Can u tell me how to fix it?
I don't any saved any backup for this phone.

Thanck you

deep_6111 · 11-18-2011, 12:25

your baseband chip is damaged change that its a hardware fault

chimeto · 11-18-2011, 12:28

Quote:

Originally Posted by deep_6111

your baseband chip is damaged change that its a hardware fault

Just read carefully before to write...
I wrote here - it's not hardware in 1000000000%.
It's software problem and I search for solution.

burhan barq · 11-18-2011, 12:29

u r phone is 3gs 8G ??

chimeto · 11-18-2011, 12:31

Quote:

Originally Posted by burhan barq

u r phone is 3gs 8G ??

Yes bro, it's 8gb 3gs.

burhan barq · 11-18-2011, 12:33

no any solution at the monument :{
i have some problem cant fix by soft were .... only u can fix by change basband ic chip

adelgsm · 11-18-2011, 12:34

Quote:

Originally Posted by chimeto

Yes bro, it's 8gb 3gs.

http://forum.gsmhosting.com/vbb/f456/warning-1383429/

chimeto · 11-18-2011, 12:37

Do you have information when can be fixed or... other hope for me?

net monitor · 11-18-2011, 14:36

Quote:

Originally Posted by chimeto

Do you have information when can be fixed or... other hope for me?

sorry no one can help you now...bring back to apple store if you want to fix the prob

mehulkr76 · 11-18-2011, 15:21

Quote:

Originally Posted by chimeto

Hello I have big problem with 3GS, the phone was firmware 4.3.5 and I tried to jaillbreak and to install ipad baseband then phone freezed and I tried to update directly from itunes with version 5.0.1 and show me error occurred (-1) and phone freeze always in recovery mode.
Now I use redsn0w to input in DFU mode then restore with custom v4.1 and now phone is alive but no have IMEI, wifi, bluetooth and modem.
I'm sure in 100% it's NOT HARDWARE, it's software problem because phone was working.

Can u tell me how to fix it?
I don't any saved any backup for this phone.

Thanck you

two days before i had the same problem buit restored it to 4.1 stock firmware. it went to recovery mode. then i just booted it thethered. its working but when i switch it off. i have to boot it thetered

Nurettin Duman · 11-18-2011, 20:46

baseband 100% Erese chip is damaged change that its a hardware fault trash the iphone

naldtek · 11-18-2011, 20:52

try to flash ipad baseband again and jailbreak igf nothing happens well its baseband chip problem

asimbutt · 11-18-2011, 20:58

yes bro its now hardware problem . Remove the chip and check it on programmer if
it ok then reprogram it otherwise u have to replace it with new one .

Unicom · 11-19-2011, 01:36

Quote:

Originally Posted by asimbutt

yes bro its now hardware problem . Remove the chip and check it on programmer if
it ok then reprogram it otherwise u have to replace it with new one .

Hi, Seems lots of people are talking about the changing of baseband chi, can any one shows on the pic where the chips is, that will help really.
Thanks

11-18-2011, 12:21	#1 (permalink)
chimeto No Life Poster Join Date: Mar 2007 Posts: 1,499 Member: 463420 Status: Offline Thanks Meter: 150	3GS no IMEI , bluetooth, wifi and modem Hello I have big problem with 3GS, the phone was firmware 4.3.5 and I tried to jaillbreak and to install ipad baseband then phone freezed and I tried to update directly from itunes with version 5.0.1 and show me error occurred (-1) and phone freeze always in recovery mode. Now I use redsn0w to input in DFU mode then restore with custom v4.1 and now phone is alive but no have IMEI, wifi, bluetooth and modem. I'm sure in 100% it's NOT HARDWARE, it's software problem because phone was working. Can u tell me how to fix it? I don't any saved any backup for this phone. Thanck you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

11-18-2011, 12:25	#2 (permalink)
deep_6111 Registered User Join Date: Dec 2007 Location: Chandigarh Posts: 343 Member: 655438 Status: Offline Thanks Meter: 146	your baseband chip is damaged change that its a hardware fault

11-18-2011, 12:29	#4 (permalink)
burhan barq Freak Poster Join Date: Jun 2006 Posts: 301 Member: 290637 Status: Offline Thanks Meter: 24	u r phone is 3gs 8G ??

11-18-2011, 12:33	#6 (permalink)
burhan barq Freak Poster Join Date: Jun 2006 Posts: 301 Member: 290637 Status: Offline Thanks Meter: 24	no any solution at the monument :{ i have some problem cant fix by soft were .... only u can fix by change basband ic chip

11-18-2011, 12:37	#8 (permalink)
chimeto No Life Poster Join Date: Mar 2007 Posts: 1,499 Member: 463420 Status: Offline Thanks Meter: 150	Do you have information when can be fixed or... other hope for me?

11-18-2011, 20:46	#11 (permalink)
Nurettin Duman Registered User Join Date: Feb 2005 Location: Turkiye :islam Posts: 2,911 Member: 115596 Status: Offline Sonork: [email protected] Thanks Meter: 1,127	baseband 100% Erese chip is damaged change that its a hardware fault trash the iphone

11-18-2011, 20:52	#12 (permalink)
naldtek Freak Poster Join Date: Jun 2007 Posts: 114 Member: 523837 Status: Offline Thanks Meter: 18	try to flash ipad baseband again and jailbreak igf nothing happens well its baseband chip problem

11-18-2011, 20:58	#13 (permalink)
asimbutt Freak Poster Join Date: Nov 2006 Location: United Kingdom Posts: 283 Member: 394146 Status: Offline Thanks Meter: 56	yes bro its now hardware problem . Remove the chip and check it on programmer if it ok then reprogram it otherwise u have to replace it with new one .