to all expert here why no 1 to answer me here!!??

[idevices]

Looks good to me... .................................................

Originally Posted by ..::M-GSM::..

is it the step this

1.Flash ipod4 to firmware 4.2.1
2.run redsnow 9.6.4b o higher
3.browse firmware 4.2.1 on redsnow and tick
-install cydia and next and follow the step redsnow to make it J/B
4.after redsnow ipod spring board will show white icon cydia but cant use..
5. use redsnow select 4.2.1 firmware and next just tick (Just Boot Tethered Right Now) and next ...

is it this the full step for the ipod4??

[idevices]

Here's the step by step guide:


STEP 1: Download redsn0w 0.9.6b5,

STEP 2: Update to 4.2.1 firmware using the IPSW file you just downloaded via iTunes 10.1.

STEP 3: Launch Redsn0w 0.9.6b5, and browse for iOS 4.2.1 firmware final version.

[IMG]http://2.bp.********.com/_jWWDyUCEUeA/TPNZCf4_okI/AAAAAAAABK4/KhFqyNTdZeo/s1600/01+redsn0w+096b5.png[/IMG]

STEP 4: Now you have to select "Install Cydia" and "Install iPad baseband", and then click "Next" (in this step redsn0w will update your baseband to 06.15.00 which works with ultrasn0w 1.2)

[IMG]http://4.bp.********.com/_jWWDyUCEUeA/TPNZC2rlIHI/AAAAAAAABK8/kmDjJBg7zEg/s1600/02+redsn0w+096b5.png[/IMG]

STEP 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.

[IMG]http://1.bp.********.com/_jWWDyUCEUeA/TPNZD7krTyI/AAAAAAAABLA/fYv3HniOwsE/s1600/03+redsn0w+096b5.png[/IMG]

STEP 6: At this stage you will need to put your iPhone in DFU mode by holding “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

[IMG]http://3.bp.********.com/_jWWDyUCEUeA/TPNZEv5bYAI/AAAAAAAABLE/9RwsEqONXwQ/s1600/04+redsn0w+096b5.png[/IMG]
[IMG]http://1.bp.********.com/_jWWDyUCEUeA/TPNZFd_kB-I/AAAAAAAABLI/YMRUdHBAlqw/s1600/05+redsn0w+096b5.png[/IMG]
[IMG]http://4.bp.********.com/_jWWDyUCEUeA/TPNZGDsIiUI/AAAAAAAABLM/xXhaTWRA3VE/s1600/06+redsn0w+096b5.png[/IMG]

STEP 7: You will Get a Jailbroken Device on the latest iOS 4.2.1 and the unlockable baseband 06.15.00

STEP 8: This step is only for these devices iPhone 4, 3GS (New Bootrom), iPod touch 4G, 3G, 2G, iPad. While this is tethered jailbreak and whenever you want to do anything related to jailbreak like SSH your device, or running Cydia, you must first run your device in the so called “jailbroken state” on every reboot by using “Just boot tethered right now” option.

[..::M-GSM::..]

Originally Posted by idevices

Here's the step by step guide:


STEP 1: Download redsn0w 0.9.6b5,

STEP 2: Update to 4.2.1 firmware using the IPSW file you just downloaded via iTunes 10.1.

STEP 3: Launch Redsn0w 0.9.6b5, and browse for iOS 4.2.1 firmware final version.

[IMG]http://2.bp.********.com/_jWWDyUCEUeA/TPNZCf4_okI/AAAAAAAABK4/KhFqyNTdZeo/s1600/01+redsn0w+096b5.png[/IMG]

STEP 4: Now you have to select "Install Cydia" and "Install iPad baseband", and then click "Next" (in this step redsn0w will update your baseband to 06.15.00 which works with ultrasn0w 1.2)

[IMG]http://4.bp.********.com/_jWWDyUCEUeA/TPNZC2rlIHI/AAAAAAAABK8/kmDjJBg7zEg/s1600/02+redsn0w+096b5.png[/IMG]

STEP 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.

[IMG]http://1.bp.********.com/_jWWDyUCEUeA/TPNZD7krTyI/AAAAAAAABLA/fYv3HniOwsE/s1600/03+redsn0w+096b5.png[/IMG]

STEP 6: At this stage you will need to put your iPhone in DFU mode by holding “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

[IMG]http://3.bp.********.com/_jWWDyUCEUeA/TPNZEv5bYAI/AAAAAAAABLE/9RwsEqONXwQ/s1600/04+redsn0w+096b5.png[/IMG]
[IMG]http://1.bp.********.com/_jWWDyUCEUeA/TPNZFd_kB-I/AAAAAAAABLI/YMRUdHBAlqw/s1600/05+redsn0w+096b5.png[/IMG]
[IMG]http://4.bp.********.com/_jWWDyUCEUeA/TPNZGDsIiUI/AAAAAAAABLM/xXhaTWRA3VE/s1600/06+redsn0w+096b5.png[/IMG]

STEP 7: You will Get a Jailbroken Device on the latest iOS 4.2.1 and the unlockable baseband 06.15.00

STEP 8: This step is only for these devices iPhone 4, 3GS (New Bootrom), iPod touch 4G, 3G, 2G, iPad. While this is tethered jailbreak and whenever you want to do anything related to jailbreak like SSH your device, or running Cydia, you must first run your device in the so called “jailbroken state” on every reboot by using “Just boot tethered right now” option.

Bro my 1 is Ipod Touch4 not iphone ...this not working to me...because ipod4 don have FIRMWARE MODEM versions...

[..::M-GSM::..]

any 1 know about ipod touch4 and already try and done J/B with work cydia on 4.2.1 iPod Touch4???