How I Fixed iPhone 4S iTunes Error 4013 - GSM-Forum

ARC Tech Repair · 08-04-2014, 18:14

I took apart the device and cleaned off the board with alcohol. I tried changing out the usb cable, battery, and charge port. None of that worked. I kept getting error 4013 in iTunes.

What I ended up having to do was to take off the black tape on the wifi chip (at the top right of the board) and using a heat gun, heated up the chip to a very hot temperature, along with the R95_RF chip to the bottom right of the wifi chip.

After heating it up, I put it in the fridge for about 10 minutes. After it cooled, I hooked up the board to the battery and a new charge port outside of the casing. After that, it restored just fine and I have a perfectly working iPhone 4s again!

newbiewe · 08-07-2014, 08:01

Thanks for your post, I get this error sometimes. But now I have the error 24, do you know how to fix it? If yes, don't you mind to show me please. I don't know how to fix it.

iphoneecia · 08-12-2014, 16:58

Quote:

Originally Posted by ARC Tech Repair

I took apart the device and cleaned off the board with alcohol. I tried changing out the usb cable, battery, and charge port. None of that worked. I kept getting error 4013 in iTunes.

What I ended up having to do was to take off the black tape on the wifi chip (at the top right of the board) and using a heat gun, heated up the chip to a very hot temperature, along with the R95_RF chip to the bottom right of the wifi chip.

After heating it up, I put it in the fridge for about 10 minutes. After it cooled, I hooked up the board to the battery and a new charge port outside of the casing. After that, it restored just fine and I have a perfectly working iPhone 4s again!

Please, could you say the temperature you used ?

08-04-2014, 18:14	#1 (permalink)
ARC Tech Repair Junior Member Join Date: Jul 2014 Location: Dunedin, Florida Posts: 12 Member: 2228503 Status: Offline Thanks Meter: 2	How I Fixed iPhone 4S iTunes Error 4013 I took apart the device and cleaned off the board with alcohol. I tried changing out the usb cable, battery, and charge port. None of that worked. I kept getting error 4013 in iTunes. What I ended up having to do was to take off the black tape on the wifi chip (at the top right of the board) and using a heat gun, heated up the chip to a very hot temperature, along with the R95_RF chip to the bottom right of the wifi chip. After heating it up, I put it in the fridge for about 10 minutes. After it cooled, I hooked up the board to the battery and a new charge port outside of the casing. After that, it restored just fine and I have a perfectly working iPhone 4s again!

08-07-2014, 08:01	#2 (permalink)
newbiewe Junior Member Join Date: Aug 2014 Posts: 4 Member: 2235936 Status: Offline Thanks Meter: 0	Thanks for your post, I get this error sometimes. But now I have the error 24, do you know how to fix it? If yes, don't you mind to show me please. I don't know how to fix it.