GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   iPhone 4 / iPhone 4S (https://forum.gsmhosting.com/vbb/f456/)
-   -   Iphone 3gs goes into DFU after unplug (https://forum.gsmhosting.com/vbb/f456/iphone-3gs-goes-into-dfu-after-unplug-1362900/)

peelaz 10-12-2011 18:21

Iphone 3gs goes into DFU after unplug
 
Hi Guys,
My iphone goes into DFU after unlocking

I recently downgraded my iphone 3gs to 4.3.2 and upgraded to ipad baseband.
1. Restored with iPhone2,1_4.3.2_8H7_Custom_Restore
2. T- boot with redsn0w_win_0.9.8b4
3. Update cydia
4. Unlock with ultrasn0w via cydia
All this time cable plugged in.
5. Open itunes and sync
6. Unplug cable and after about 20 or so seconds, screen black out and went into recovery or DFU mode.

Not able to t-boot or restore at this point.

This is the second time it happened with same iphone. I was able to restore with same custom firmware after the battery was drained (roughly 1 week after).

Any suggestions would be appreciated.

javokhir 10-12-2011 18:33

could you post error number?

xerex999 10-12-2011 18:57

you need to open and disconnect the battery from board. then restore to 4.3.5
if your BB is already 6.15, you have an error 1015
used lates redsnow and JB, then just boot tethered..

spider08 10-12-2011 20:00

Quote:

Originally Posted by xerex999 (Post 7797485)
you need to open and disconnect the battery from board. then restore to 4.3.5
if your BB is already 6.15, you have an error 1015
used lates redsnow and JB, then just boot tethered..


I have one question about tethered. for 3gs ,after doing boot tethered,
each time when I restart the phone must I tethered again ?

pls clear my doubt.

thanks

peelaz 10-12-2011 20:08

Quote:

Originally Posted by javokhir (Post 7797445)
could you post error number?

There is no error code
iPhone just goes abruptly into recovery/DFU.

After I downgraded and restored the custom firmware and t-booted, it came up fine. I was able to install ultrasn0w and unlock fine. I actually had it up for the better part of a day with no issues (plugged in). As soon as I unplugged the cable, it went into recovery/DFU. No errors, no warning. Just went black.

When I plugged the cable back in, itunes gave the message that it has detected an iPhone in recovery mode you must .....

All attempts to t-boot or itunes restore fails.
Get the "waiting for the phone to reboot" in redsnow and
"Itunes is prepareing iPhone for restore", in itunes.
Just simply hangs there. (needless to say in recovery/DFU)

So yeah that's my dilemma.

I have no Idea what the prob is here.

peelaz 10-12-2011 23:03

Ok so I disconnected the battery and was able to boot restore the custom firmware. Now the screen doesn't work right. Prob pulled out something in the process. After I unplugged it again from the computer, the same thing happened again. The screen went black and it went into DFU/recovery mode.

javokhir 10-29-2011 18:26

you should listen to one person, not to all idi**s. especially regarding open & disconnect battery


All times are GMT +1. The time now is 04:41.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.11676 seconds with 7 queries

SEO by vBSEO