Iphone 3gs goes into DFU after unplug

[peelaz]

Hi Guys,
My iphone goes into DFU after unlocking

I recently downgraded my iphone 3gs to 4.3.2 and upgraded to ipad baseband.
1. Restored with iPhone2,1_4.3.2_8H7_Custom_Restore
2. T- boot with redsn0w_win_0.9.8b4
3. Update cydia
4. Unlock with ultrasn0w via cydia
All this time cable plugged in.
5. Open itunes and sync
6. Unplug cable and after about 20 or so seconds, screen black out and went into recovery or DFU mode.

Not able to t-boot or restore at this point.

This is the second time it happened with same iphone. I was able to restore with same custom firmware after the battery was drained (roughly 1 week after).

Any suggestions would be appreciated.

[javokhir]

could you post error number?

[xerex999]

you need to open and disconnect the battery from board. then restore to 4.3.5
if your BB is already 6.15, you have an error 1015
used lates redsnow and JB, then just boot tethered..

[spider08]

Originally Posted by xerex999

you need to open and disconnect the battery from board. then restore to 4.3.5
if your BB is already 6.15, you have an error 1015
used lates redsnow and JB, then just boot tethered..

I have one question about tethered. for 3gs ,after doing boot tethered,
each time when I restart the phone must I tethered again ?

pls clear my doubt.

thanks

[peelaz]

Originally Posted by javokhir

could you post error number?

There is no error code
iPhone just goes abruptly into recovery/DFU.

After I downgraded and restored the custom firmware and t-booted, it came up fine. I was able to install ultrasn0w and unlock fine. I actually had it up for the better part of a day with no issues (plugged in). As soon as I unplugged the cable, it went into recovery/DFU. No errors, no warning. Just went black.

When I plugged the cable back in, itunes gave the message that it has detected an iPhone in recovery mode you must .....

All attempts to t-boot or itunes restore fails.
Get the "waiting for the phone to reboot" in redsnow and
"Itunes is prepareing iPhone for restore", in itunes.
Just simply hangs there. (needless to say in recovery/DFU)

So yeah that's my dilemma.

I have no Idea what the prob is here.

[peelaz]

Ok so I disconnected the battery and was able to boot restore the custom firmware. Now the screen doesn't work right. Prob pulled out something in the process. After I unplugged it again from the computer, the same thing happened again. The screen went black and it went into DFU/recovery mode.

[javokhir]

you should listen to one person, not to all idi**s. especially regarding open & disconnect battery