GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Chinese Models & Cloned Phones

Chinese Models & Cloned Phones All China Phone Platforms like (MTK, Spreadtrum.. etc.) Cloned Nokia Nokla & Motorola . etc. Phones are included

Reply
 
LinkBack Thread Tools Display Modes
Old 10-20-2007, 22:12   #16 (permalink)
Junior Member
 
Join Date: Oct 2005
Posts: 6
Member: 192331
Status: Offline
Thanks Meter: 1

remove bluetouth ic.tested .fone will work ok
  Reply With Quote
The Following User Says Thank You to SERGIU_127 For This Useful Post:
Old 11-03-2007, 11:11   #17 (permalink)
Junior Member
 
Join Date: Jun 2007
Posts: 16
Member: 522565
Status: Offline
Thanks Meter: 0
what is the password for cect t689
  Reply With Quote
Old 11-03-2007, 18:36   #18 (permalink)
Junior Member
 
Join Date: Nov 2007
Posts: 5
Member: 624005
Status: Offline
Thanks Meter: 0
Dear Sir;
i have the seam broplem pleas explean how you fix it


Quote:
Originally Posted by zoki View Post
I have CECT T689,and when I put sim inside phone is restarting,again and again,e.t.c.I try to restore factory,but it's the same.Maybe is hardware,because phone is not restarting without sim inside.
  Reply With Quote
Old 11-03-2007, 22:15   #19 (permalink)
Freak Poster
 
Join Date: Oct 2007
Location: country
Posts: 464
Member: 621936
Status: Offline
Thanks Meter: 42
Quote:
Originally Posted by ahmed_massoud View Post
Dear Sir;
i have the seam broplem pleas explean how you fix it


Here is infinity-box easy manual for you, read and understand what to do. Easy steps but you need special equipment.
  Reply With Quote
Old 11-04-2007, 10:13   #20 (permalink)
Junior Member
 
Join Date: Nov 2007
Posts: 5
Member: 624005
Status: Offline
Thanks Meter: 0
Hi:
if you fix it pleas explean how i fease the seam broplem

Quote:
Originally Posted by zoki View Post
I have CECT T689,and when I put sim inside phone is restarting,again and again,e.t.c.I try to restore factory,but it's the same.Maybe is hardware,because phone is not restarting without sim inside.
  Reply With Quote
Old 11-04-2007, 10:25   #21 (permalink)
Junior Member
 
Join Date: Nov 2007
Posts: 5
Member: 624005
Status: Offline
Thanks Meter: 0
hi:
ther is no link can you pleas re send it
thanks


Quote:
Originally Posted by Nippo View Post
Here is infinity-box easy manual for you, read and understand what to do. Easy steps but you need special equipment.
  Reply With Quote
Old 11-04-2007, 21:58   #22 (permalink)
Freak Poster
 
Join Date: Oct 2007
Location: country
Posts: 464
Member: 621936
Status: Offline
Thanks Meter: 42
Quote:
Originally Posted by ahmed_massoud View Post
hi:
ther is no link can you pleas re send it
thanks


sorry, I forgot to post link. Here is link to Infinity-Box manual:
http:///vbb/showthread.php?t=447277
  Reply With Quote
Old 11-11-2007, 10:18   #23 (permalink)
Junior Member
 
Join Date: Nov 2007
Posts: 5
Member: 624005
Status: Offline
Thanks Meter: 0
Dear Mohamed the password is 1122
regards
ahmed

Quote:
Originally Posted by MOHAMMEDKASSIM View Post
what is the password for cect t689
  Reply With Quote
Old 11-15-2007, 23:04   #24 (permalink)
No Life Poster
 
snsoftkiller's Avatar
 
Join Date: Mar 2006
Location: Inside facebook
Age: 47
Posts: 2,618
Member: 250468
Status: Offline
Sonork: 100.110362
Thanks Meter: 96
Quote:
Originally Posted by SERGIU_127 View Post
remove bluetouth ic.tested .fone will work ok
Can you post a picture to see where is the bluetooth ic ?
  Reply With Quote
Old 11-26-2007, 12:27   #25 (permalink)
Junior Member
 
Join Date: Sep 2007
Posts: 11
Member: 581018
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by GSM SNIPER View Post
This is the proove :

COM14 [VCP3] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
memory structure: 2nd [enhanced] (or higher) generation
warning: make backup before any action !
identification data Ok
identification data backup saved: id.E3ED9EA7.[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N_22F6193A].rpl
identification detection finished
device-id: E3ED9EA7
protocol version: 04
version sw1: E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N
version sw2: E550_A5ARABBT.PCBV3_0.01.2
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detecting structure pass 1...
...................
detect standard location pass #1...
.................................................. ......
detect extended location pass #1...
.................................................. .
detect standard offset pass #1...
detect standard data...
layout detection complete
eeprom element #1 detected ok
reading [eeprom[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]]...
file saved: backup_eeprom[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]_20070921-145819.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
Finalization Done
Write...
flash: EC257E25082501:29EA0000000000
Write: eeprom
Write Done
file saved: backup_system_log_E3ED9EA7_[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]_22F6193A_20070921-145856.B0X.bin
Finished, time used: 208 sec
Remove/Install battery now !
COM14 [VCP3] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
memory structure: 2nd [enhanced] (or higher) generation
warning: make backup before any action !
identification data Ok
identification data backup saved: id.E3ED9EA7.[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N_22F6193A].rpl
identification detection finished
device-id: E3ED9EA7
protocol version: 04
version sw1: E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N
version sw2: E550_A5ARABBT.PCBV3_0.01.2
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detecting structure pass 1...
...................
detect standard location pass #1...
.................................................. ......
detect extended location pass #1...
.................................................. .
detect standard offset pass #1...
detect standard data...
layout detection complete
eeprom element #1 detected ok
reading [eeprom[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]]...
file saved: backup_eeprom[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]_20070921-145819.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
Finalization Done
Write...
flash: EC257E25082501:29EA0000000000
Write: eeprom
Write Done
file saved: backup_system_log_E3ED9EA7_[E550_A5ARABBT_E550_GPRS_MT6226_S01.PCBV3_0_01_2.BI N]_22F6193A_20070921-145856.B0X.bin
Finished, time used: 208 sec
Remove/Install battery now !
Yo, can you please explain step by step instructions to format the CECT T689 phone? Please, explain what buttons to click on what program to make it happen. Thanx.

I really need this as I have the same problem.
  Reply With Quote
Old 11-26-2007, 12:35   #26 (permalink)
Junior Member
 
Join Date: Sep 2007
Posts: 11
Member: 581018
Status: Offline
Thanks Meter: 0
I want to format CECT T689 phone WITHOUT infinity box, so please stop giving references to infinity box.
  Reply With Quote
Old 11-26-2007, 12:45   #27 (permalink)
No Life Poster
 
cellsolution's Avatar
 
Join Date: Feb 2005
Location: Ahmedabad, Gujarat
Age: 45
Posts: 714
Member: 121078
Status: Offline
Sonork: 100.1590676
Thanks Meter: 292
Thumbs up

Its 100% s/w prob use infinity & perfect calble ill solve your prob in just 2min.

cable pin out keyboard top
1.........18
1: Gnd
2: Gnd
7: Tx
9: Rx

& it process
ChineseMiracle": how to repair "reboot with SIM card"

1. make full flash backup for emergency case (use 921000 speed for fast operation)
2. select "safe format method"
3. make "format ffs"
4. remove/install battery
5. press and hold phone "Power" button during 30-40 sec to make phone powered-on
if phone Ok go to step-6
if phone not Ok, go to step 2 and select "complete format method"
6. restore original imei
  Reply With Quote
The Following User Says Thank You to cellsolution For This Useful Post:
Old 11-26-2007, 13:03   #28 (permalink)
Junior Member
 
Join Date: Sep 2007
Posts: 11
Member: 581018
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by cellsolution View Post
...

& it process
ChineseMiracle": how to repair "reboot with SIM card"

1. make full flash backup for emergency case (use 921000 speed for fast operation)
2. select "safe format method"
3. make "format ffs"
4. remove/install battery
5. press and hold phone "Power" button during 30-40 sec to make phone powered-on
if phone Ok go to step-6
if phone not Ok, go to step 2 and select "complete format method"
6. restore original imei
I already have the data cable, and it's working (I can tranfer USB data to the phone micro SD card through Windows XP).
When I connect the phone on the usb data cable, it gives me a menu. I select "COM port".

And then, I don't know what to do further. The instructions you posted here apply to what program? On what program should I follow those 6 steps? Thanx again
  Reply With Quote
Old 11-26-2007, 13:17   #29 (permalink)
Junior Member
 
Join Date: Sep 2007
Posts: 11
Member: 581018
Status: Offline
Thanks Meter: 0
BTW I don't have infinity box nor chinese miracle. Can I do the format with TMK/Flash tool, and how?
  Reply With Quote
Old 11-27-2007, 10:54   #30 (permalink)
Product Supporter
 
Join Date: Mar 2005
Age: 44
Posts: 3,487
Member: 128745
Status: Offline
Thanks Meter: 16,936
@ muaddim

if you are a profesional in GSM Business , then you must buy Infinity Box , without this box you are wasting your time searching for free solution
A very small investment with infinity box can get you fortune of income , every day .
If you are not a profesional you can start chinese phone repair business by purchasing infinity box today and make money everyday
visit www.infinity-box.com for detailed information

Welcome to GSM WORLD
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
CECT T689 when inser sim restarting NOW? ismabdi SpiderMan 2 01-23-2009 06:14
CECT T689 restart when insert sim card? svchost Infinity-Box 5 11-15-2008 21:43
Cect t689 restart with sim card F@RUK S Infinity-Box 7 09-17-2008 21:50
CECT T689 Restarting Problem mooSa34 Chinese Models & Cloned Phones 19 03-23-2008 12:29
CECT T689 dual sim PDA Phone crvkva10 HTC & PDA WM( With Touchscreen) 1 07-12-2007 08:31

 



All times are GMT +1. The time now is 09:08.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.25280 seconds with 10 queries

SEO by vBSEO