clone s4 mt6575

[alsmadi_86]

Clone s4 mtk6575 Hello everyone



I have china mobiel clone s4 mt6575 When i install this rom By sp flash

HDC S4 GT-i9500 Pro MT6575

I tried start my device its not responding at all… its not charging ,the power button is not responding , its not connecting to pc.

I want to know Whats happened to my device and How i can fix it

PLEASE help me …

[HUM]

try this

MT657x (MT6515 / MT6575 / MT6577) flashing tutorial



Now that the new MediaTek SoC has been released, it is time to publish the instructions on how to flash your MT65x5 (MT6515 and MT6575) based phone. Please note that the images shown on this tutorial are just examples and that you must flash your phone with the correct ROM files.

Make sure that you read everything carefully and know what you are doing. Don't blame me for any damage that may occur on your phone.



Update: By the time that this tutorial was written only MT65x5 was available. Current MT6577 based phones can also be flashed using the exact same method, so this has just been updated with references to that most recent SoC.



What's needed:

USB data cable
MediaTek USB VCOM drivers
SP Flash Tool (v3.1206.01 or higher for MT6575 / v3.1222.00 or higher for MT6577)

Note: SP Flash Tool is backward compatible, which means you can (and should) use the most up to date version.

And now the tutorial...

First of all, make sure that you have MediaTek DA USB VCOM drivers installed.



Flashing the whole ROM

First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file (MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.



Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.





After the red progress bar is complete, there will appear a purple progress bar.



Right after the purple progress bar is complete, a message will appear underneath it: “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).



When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.



You can now safely disconnect your phone and turn it on. The process ends here.

[alsmadi_86]

sir

my device its not responding at all… its not charging ,the power button is not responding , its not connecting to pc.