"-n95 calibrate touchscreen infinity team help!!!!!!!"- - GSM-Forum

jcjibz2 · 07-02-2008, 14:27

help infinity tem

i sucssesfully calibrate touchscreen on infinity but theres a problem everytime i try to touch the point in screen its going to the other side of screen plzzzzzz help
thanks

here is the logs:
COM8 [VCP1] selected
Action: touchscreen calibration
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031

8C1:029A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: H331_00THAI_V0.0.7
Version: H330_HW
detecting structure #2...
done
60 byte(s) read
imei: 35165800560716
connection Ok
detecting structure #5...
0 1 done
204 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 16 sec
Remove/Install battery now !

jcjibz2 · 07-03-2008, 02:54

where is the infinity team.......or anyone have a sulotion ...............

.:bono:. · 07-03-2008, 02:59

u can calibrate in in phone menu, phone seting/calibrate

jcjibz2 · 07-03-2008, 06:08

i already calibrated in phone menu setting/calibrate but the problem is still the same..... so pls need help.... thanks

07-02-2008, 14:27	#1 (permalink)
jcjibz2 Crazy Poster Join Date: Apr 2008 Posts: 50 Member: 752130 Status: Offline Sonork: jibz Thanks Meter: 3	"-n95 calibrate touchscreen infinity team help!!!!!!!"- help infinity tem i sucssesfully calibrate touchscreen on infinity but theres a problem everytime i try to touch the point in screen its going to the other side of screen plzzzzzz help thanks here is the logs: COM8 [VCP1] selected Action: touchscreen calibration Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing[6226:8A02:8A01]... CPU: MT6226 high speed boot disabled chip: 00318C1:029A Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: H331_00THAI_V0.0.7 Version: H330_HW detecting structure #2... done 60 byte(s) read imei: 35165800560716 connection Ok detecting structure #5... 0 1 done 204 byte(s) read writing data... verification... verification Ok Finished, time used: 16 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Infinity can't unlock MXNEC N9 chip Infineon 7880, Infinity team help me !	coolderheart	Infinity-Box	1	11-15-2009 06:12
touch calibration infinity team help me	lalitgvarshney	Infinity-Box	4	01-25-2009 08:53
infinity team help all infinity user	TUR@N ALAM	Infinity-Box	3	08-09-2008 08:59
infinity team help !!	REALTHOMAS	Infinity-Box	6	07-17-2006 17:26
@ infinity team help needed for Alcatel cable	chowdary	Infinity-Box	2	02-11-2006 10:52

07-03-2008, 02:54	#2 (permalink)
jcjibz2 Crazy Poster Join Date: Apr 2008 Posts: 50 Member: 752130 Status: Offline Sonork: jibz Thanks Meter: 3	where is the infinity team.......or anyone have a sulotion ...............

07-03-2008, 02:59	#3 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	u can calibrate in in phone menu, phone seting/calibrate

07-03-2008, 06:08	#4 (permalink)
jcjibz2 Crazy Poster Join Date: Apr 2008 Posts: 50 Member: 752130 Status: Offline Sonork: jibz Thanks Meter: 3	i already calibrated in phone menu setting/calibrate but the problem is still the same..... so pls need help.... thanks