help with pinout for CECT KA08 mini iphone clone - GSM-Forum

shimi77 · 05-29-2009, 09:05

hi all ,

i need some help with pinout for CECT KA08 mini iphone clone.

Which pinout should I use for flashing this phone .

I am thanking you .

stcane · 06-03-2009, 10:16

Hi all,

I have a KA08 mini and i am interested to know what firmware version i have, how can i find out, and also how can i upload the latest version, all help is welcome.

Where can i get the latest firmware from?

Regards
steve

shimi77 · 06-23-2009, 06:40

some one help for this issue.
ka08 pinout

ck32 · 06-23-2009, 15:34

Have a look here maybe you'll find what you're looking for : This Link

shimi77 · 06-30-2009, 11:02

Thanks for sharing , I all ready tried to use the
1,9 – GND
2 - + VCC
3 – RX
4 – TX

This pinout not working, tried all the mtk flashing tools by all version , tried the Spiderman too.

Not working .

shimi77 · 07-02-2009, 13:46

hi guys ,

finaly i read ka08 firmware .
i used usb to serial cable with the 2303hcx chip.
used the rx and tx from the cable to pin 3 and pin 4 (phone)

ColonelZap · 07-02-2009, 13:51

Cool :-)

Could you upload the FW and share it with us, please

Edit: So, what is the correct pinout then?

Gnd=
Rx=
Tx=

shimi77 · 07-03-2009, 15:09

Here is ka08 flash firmware file .

http://www.filefactory.com/file/aha66dh/n/ka08-16_bin

I used the mtk flash tool to read the phone.
Used modified USB to serial cable with 2303hxc chip .
The pinout that I used is :

RX – 3
TX – 4
GND -9

brice12 · 07-03-2009, 22:17

hello,

Can you help me to pinout firmware ka08?

Can you give the information to pinout firmware?
Do you have a tuto?
Do you have modified the USB cable?

Best regards

mikyjorda1 · 07-04-2009, 01:09

Quote:

Originally Posted by shimi77

hi guys ,

finaly i read ka08 firmware .
i used usb to serial cable with the 2303hcx chip.
used the rx and tx from the cable to pin 3 and pin 4 (phone)

what cable you have used?
tanks

shimi77 · 07-04-2009, 11:42

Here are some photos include the method I used to modify the cable , I used Samsung e700 cable .
Took LC12 connector and soldered 2,3,4 and 9 pin – I cast on the connector some hot glue to hardened it , then I connected the to some kind of array that gave me some simplicity to connect the other end of cable (e700 cable).
Again the pinout for reading the flash file is :

Rx – 3
Tx – 4
GND – 9

For flashing the phone just add the vcc + to pin 2 of the phone , vcc is the the red wire from the USB cable .

reuvengershon · 07-06-2009, 13:30

hi everybody
can u tell me if i can use Cable Compatible for China16 (CECT-N168 / Nokia-N800 - 12 pin) USB Unlocking
http://www.ipmart.com/main/product/C...php?prod=27068

reuvengershon · 07-06-2009, 13:33

and do u have movie that showing how u did the cable and flash the phone?

felisuki · 07-15-2009, 06:59

Anyone has tested this method???

I buyed the E700 cable but I am waiting because I buyed online.

ck32 · 07-23-2009, 09:25

Quote:

Originally Posted by shimi77

Here is ka08 flash firmware file .

http://www.filefactory.com/file/aha66dh/n/ka08-16_bin

I used the mtk flash tool to read the phone.
Used modified USB to serial cable with 2303hxc chip .
The pinout that I used is :

RX – 3
TX – 4
GND -9

Thanks for this topic. I am trying to make a similar cable and have understood all what you did but have one more question about the LC12 connector : I don'nt know where is the PIN 1 on this connector.

For me, viewing from the rear, the connector's pin should be like this :
____________
\1 3 5 7 9 11/
\2 4 6 8 10 12/

Anyone can confirm this ?

Thanks

Ck

05-29-2009, 09:05	#1 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	help with pinout for CECT KA08 mini iphone clone hi all , i need some help with pinout for CECT KA08 mini iphone clone. Which pinout should I use for flashing this phone . I am thanking you .

07-03-2009, 15:09	#8 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	Ka08 firmware file Here is ka08 flash firmware file . http://www.filefactory.com/file/aha66dh/n/ka08-16_bin I used the mtk flash tool to read the phone. Used modified USB to serial cable with 2303hxc chip . The pinout that I used is : RX – 3 TX – 4 GND -9

07-15-2009, 06:59	#14 (permalink)
felisuki Junior Member Join Date: Feb 2006 Posts: 18 Member: 233050 Status: Offline Thanks Meter: 4	Tested ? Anyone has tested this method??? I buyed the E700 cable but I am waiting because I buyed online.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help with pinout FOR 8800e-1 2sim	samih127	Infinity-Box	2	07-14-2009 01:49
please help with pinOUT FOR N95 8GB RM 145	ServiceTEL	Infinity-Box	12	06-06-2009 04:47
please help with pinout FOR 8800e-1 Art	Denozaur	Infinity-Box	2	05-12-2009 19:14
Help me pinout for Cect c2000	adelgsm	Infinity-Box	5	06-18-2008 17:37
Help with pinouts for MT-35i	UEM	Mitsubishi	0	06-08-2004 09:13

06-03-2009, 10:16	#2 (permalink)
stcane Junior Member Join Date: Jun 2009 Posts: 2 Member: 1044912 Status: Offline Thanks Meter: 0	Hi all, I have a KA08 mini and i am interested to know what firmware version i have, how can i find out, and also how can i upload the latest version, all help is welcome. Where can i get the latest firmware from? Regards steve

06-23-2009, 06:40	#3 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	some one help for this issue. ka08 pinout

06-23-2009, 15:34	#4 (permalink)
ck32 Junior Member Join Date: Jul 2004 Age: 46 Posts: 4 Member: 73371 Status: Offline Thanks Meter: 0	Have a look here maybe you'll find what you're looking for : This Link

06-30-2009, 11:02	#5 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	Thanks for sharing , I all ready tried to use the 1,9 – GND 2 - + VCC 3 – RX 4 – TX This pinout not working, tried all the mtk flashing tools by all version , tried the Spiderman too. Not working .

07-02-2009, 13:46	#6 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	hi guys , finaly i read ka08 firmware . i used usb to serial cable with the 2303hcx chip. used the rx and tx from the cable to pin 3 and pin 4 (phone)

07-02-2009, 13:51	#7 (permalink)
ColonelZap Insane Poster Join Date: Jun 2008 Posts: 94 Member: 792296 Status: Offline Thanks Meter: 39	Cool :-) Could you upload the FW and share it with us, please Edit: So, what is the correct pinout then? Gnd= Rx= Tx=

07-03-2009, 22:17	#9 (permalink)
brice12 Junior Member Join Date: Jul 2009 Posts: 1 Member: 1067141 Status: Offline Thanks Meter: 0	hello, Can you help me to pinout firmware ka08? Can you give the information to pinout firmware? Do you have a tuto? Do you have modified the USB cable? Best regards

07-04-2009, 11:42	#11 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	Here are some photos include the method I used to modify the cable , I used Samsung e700 cable . Took LC12 connector and soldered 2,3,4 and 9 pin – I cast on the connector some hot glue to hardened it , then I connected the to some kind of array that gave me some simplicity to connect the other end of cable (e700 cable). Again the pinout for reading the flash file is : Rx – 3 Tx – 4 GND – 9 For flashing the phone just add the vcc + to pin 2 of the phone , vcc is the the red wire from the USB cable .

07-06-2009, 13:30	#12 (permalink)
reuvengershon Junior Member Join Date: Jul 2009 Posts: 3 Member: 1067182 Status: Offline Thanks Meter: 0	hi everybody can u tell me if i can use Cable Compatible for China16 (CECT-N168 / Nokia-N800 - 12 pin) USB Unlocking http://www.ipmart.com/main/product/C...php?prod=27068

07-06-2009, 13:33	#13 (permalink)
reuvengershon Junior Member Join Date: Jul 2009 Posts: 3 Member: 1067182 Status: Offline Thanks Meter: 0	and do u have movie that showing how u did the cable and flash the phone?