How to find pinout for unknown model

[R@ZIB-BD]

How to find pinout for unknown model

Please, follow instruction exactly like described below
In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:
1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make other operations
Note about "Chinese models":
Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to make detailed description of model,
attach phone photo, phone bottom connector photo and information about Gnd and Charge pins on phone bottom connector.
If you see in our cables/pinouts description wrong pinout for "Chinese models" it's good idea to find correct pinout according to above instruction and
send new pinout information with full text from phone back label to support.
enjoy......!

[phone18]

pinfinder is the best best box in the market now

[rezwan_jack]

Thanks Brother
It's good idea to find correct pinout according to above instruction.

Also the simple way to find pinouts check here http://forum.gsmhosting.com/vbb/5530460-post2.html

[Faheem Anjum]

simple way to find pinouts check here http://forum.gsmhosting.com/vbb/5530460-post2.html