Q Mobile LT900 FRP Remove Done by SELECT :WIKO SEC_6739 - GSM-Forum

rashid48581 · 07-23-2019, 14:11

any one have solution to remove frp of this model ??

Action : Boot Info.
Selected 0-By CPU:MT6739
Exe version: Avengers Box MTK 0.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Helio connect da error, aborting.
[SECURE BOOT]Not supported by exe or wrongly selected, aborting
If model is listed, please select correct model
If model is not listed, use custom DA from phone firmware
BBCHIP MT6739
Boot Fail.!!!.
[helio]Wait untill phone will start charging.
[0]All done.

doctornurnabi · 07-25-2019, 15:56

you try nck or umt?
if yes reply me

rashid48581 · 07-31-2019, 15:07

Quote:

Originally Posted by doctornurnabi

you try nck or umt?
If yes reply me

not work with any tool
just easy frp bypass with youtube

ihsan.khan.gsm · 08-17-2019, 13:24

i have almost all box i will say all is useless i share wich is faild .cm2 nck box eft dongle mircale box .sigma key mrt .still could,t phone my hand

ihsan.khan.gsm · 08-17-2019, 13:40

Quote:

Originally Posted by doctornurnabi

you try nck or umt?
if yes reply me

i have almost all tool like as got posted still faild cm2 nck box eft sigma key mircale mrt in the moment we have 6 tools wich is suported but still could,t all is useless

rashid48581 · 08-18-2019, 08:35

just try to bypass this fone

papoo · 11-09-2019, 15:36

Quote:

Originally Posted by rashid48581

any one have solution to remove frp of this model ??

Action : Boot Info.
Selected 0-By CPU:MT6739
Exe version: Avengers Box MTK 0.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Helio connect da error, aborting.
[SECURE BOOT]Not supported by exe or wrongly selected, aborting
If model is listed, please select correct model
If model is not listed, use custom DA from phone firmware
BBCHIP MT6739
Boot Fail.!!!.
[helio]Wait untill phone will start charging.
[0]All done.

CM2MTK2

SELECT :WIKO SEC_6739
RESET FRP DONE

Here is Log

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: 880103455042313030497746865985B9
EMMC: VEN : FORESEE | OEM : 301 | DEV : EPB100
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1CE100000 [ 7.22 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : E2BA017329E3DF6B9D948CF5E05F0C66

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

chzaheer4848 · 12-07-2019, 09:20

good work bro thanks a lot

m rizwan sh · 12-07-2019, 15:53

Quote:

Originally Posted by papoo

CM2MTK2

SELECT :WIKO SEC_6739
RESET FRP DONE

Here is Log

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM23)
MODE : PRELOADER PORT
PORT : 23
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: 880103455042313030497746865985B9
EMMC: VEN : FORESEE | OEM : 301 | DEV : EPB100
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1CE100000 [ 7.22 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : E2BA017329E3DF6B9D948CF5E05F0C66

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

Thanks Bro
its 1000% working......

Brospros · 12-25-2019, 18:49

Working For me Thanks

zakir321 · 03-20-2020, 15:26

thank you for m rizwan sh

mazloom · 07-09-2020, 09:28

Need firmware
Lt900

raza400 · 03-15-2021, 13:35

da for qmobile lt900 use with any tool

****************************/file/5axuc...00+da.bin/file

07-23-2019, 14:11	#1 (permalink)
rashid48581 Freak Poster Join Date: Dec 2017 Posts: 494 Member: 2792776 Status: Offline Sonork: 1577835 Thanks Meter: 82	Q Mobile LT900 FRP Remove Done by SELECT :WIKO SEC_6739 any one have solution to remove frp of this model ?? Action : Boot Info. Selected 0-By CPU:MT6739 Exe version: Avengers Box MTK 0.6.1 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7) Boot mode: Preloader Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 5. Helio MT6739 phone detected, swithing to helio api Helio enabled DRAM in First Da: TRUE Helio connect da error, aborting. [SECURE BOOT]Not supported by exe or wrongly selected, aborting If model is listed, please select correct model If model is not listed, use custom DA from phone firmware BBCHIP MT6739 Boot Fail.!!!. [helio]Wait untill phone will start charging. [0]All done. Last edited by rashid48581; 07-23-2019 at 14:21.

07-25-2019, 15:56	#2 (permalink)
doctornurnabi Junior Member Join Date: Dec 2018 Posts: 10 Member: 2885970 Status: Offline Thanks Meter: 0	you try nck or umt? if yes reply me

08-17-2019, 13:24	#4 (permalink)
ihsan.khan.gsm No Life Poster Join Date: Jan 2011 Location: ISLD Posts: 3,644 Member: 1489021 Status: Offline Sonork: 100.1620946 Thanks Meter: 831	i have almost all box i will say all is useless i share wich is faild .cm2 nck box eft dongle mircale box .sigma key mrt .still could,t phone my hand

08-18-2019, 08:35	#6 (permalink)
rashid48581 Freak Poster Join Date: Dec 2017 Posts: 494 Member: 2792776 Status: Offline Sonork: 1577835 Thanks Meter: 82	just try to bypass this fone

12-07-2019, 09:20	#8 (permalink)
chzaheer4848 Junior Member Join Date: Sep 2017 Posts: 9 Member: 2761736 Status: Offline Thanks Meter: 0	good work bro thanks a lot

12-25-2019, 18:49	#10 (permalink)
Brospros Junior Member Join Date: May 2018 Posts: 1 Member: 2837490 Status: Offline Thanks Meter: 0	Working For me Thanks

03-20-2020, 15:26	#11 (permalink)
zakir321 Junior Member Join Date: Dec 2013 Location: pakistan karachi banaras Posts: 3 Member: 2087476 Status: Offline Sonork: zakir Thanks Meter: 0	thank you for m rizwan sh

07-09-2020, 09:28	#12 (permalink)
mazloom Junior Member Join Date: Jul 2014 Posts: 3 Member: 2218167 Status: Offline Thanks Meter: 0	Need firmware Lt900

03-15-2021, 13:35	#13 (permalink)
raza400 No Life Poster Join Date: Sep 2011 Location: IN_YOUR_HEART Posts: 2,174 Member: 1661953 Status: Offline Sonork: 100.1666694 Thanks Meter: 1,377	da for qmobile lt900 use with any tool ****************************/file/5axuc...00+da.bin/file