Soly Elison SPD 6600L Flashing Problem
 

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
RXD=2 TXD=1
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=357948046331509
IMEI 2=357948046331525
--------NOR_FLASH_CONFIG--------
Flash Bank count=4587595
EFS sector count=0
File sector count=0
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00000000
Product information addr=0x00760000
MMI resource addr=0x0000002B
------Auto Format Address-------
Start=0x00000000
Size =0x00760000
Read FS info...done

1. I cannot save the flash file while reding flash.
2. The set of which the log is presented actually a three SIM set but shows only two IMEI Nos., while it should be IMEI 1=357948046331509, IMIE 2=357948046331517, & IMEI3=357948046331525
3. My Box is MTK BOX III, Connector Nos. Either P-12C or P-14H
Please help me ........................

what the problem in this set ,

Thanks for your reply.
the actuaql problem that One SALY ELISOM W108 3 SIM china set runs with TATA DOCOMO, UNINOR & AIRCEL SIMs but there is no network with BSNL, VODAFONE, AIRTEL, AND OTHER SIMs.
I have given the log of the Saly Elisom set here..

if there is any remedy plz help...

The same problem I have been facing with reading and writing flash with one bassoon F 800 also. I cannot understand what and where is the problem. please anyone help me out.....

Thanx

Log here:


Analysis the file...
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM26
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355787047997203
IMEI 2=355787047997211
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=5
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00790000
Product information addr=0x007F0000
MMI resource addr=0x005F0000
------Auto Format Address-------
Start=0x007A0000
Size =0x00050000
Read FS info...done

I have flashed the bassoon. It becomes OK but in case of Suly Elisom W 108 there is NO Netwok.

pls send wing m66 flash file