Walton All Android [Official Flashtool & Drivers Firmware collection] 1000% tested

[Dipankor-ctg]

Flash Tool Download Link: Walpad8x_4.4.2_1

1. If it is the first time to use this tool, you need to install the driver. install driver according to your PC type.
2. Open folder, find “flash_tool” as picture showed. And run flash_tool.exe, then you will see the following picture one by one.











3. Shut down tablet, connect it with your PC, then click this "Download", and then use a needle to push "reset" button on tablet.



Start burning firmware…



Succeed burning.



Unplug USB cable, and starting up your tablet.

[Dipankor-ctg]

Walpad 10 Series



Firmware & Flashtools Download Link:




Walpad10x_4.4.2_1



1. If it is the first time to use this tool, you need to install the driver. install driver according to your PC type.

2. Open folder ,find “flash_tool” as picture showed. And run flash_tool.exe, then you will see the following picture one by one.





3. Load Scatter File:



4. After Successful Scatter Loading, your interface will be as below:



5. Shut down tablet, connect it with your PC, then click this "Download", and then use a needle to push "reset" button on tablet.



6. After clicking on Downlaod, Burn Starts:



7. Burning succeed. A Confirm Dialog will appear



Unplug USB cable, and starting up your tablet.

[Dipankor-ctg]

Walpad Pro Series



Download Link of Windows 10 Upgrade Tutorial -


Walpad Pro Windows 10 upgrade instruction(2)


Download the above file and follow step by step guide for upgrading to Windows 10

Bro
Dipankor-ctg

* Always Follow Forum Rules Here
* Use Only Thanks Button
* Use Search Button Before make Thread

[bipugunjan]

need walpad 8b 6582 flash file

[shahinahmed007]

r3 firmware.....................

[Dipankor-ctg]

Originally Posted by shahinahmed007

r3 firmware.....................

Flow And Here your need Firmware

R3 Official Flashtool & Driver [Android 4.4- Final Version] download Link:

R3_4.4.2_2


1. Install driver.


2. Open Flash Tool



3. Open Download Agent and select MTK_AllinOne_DA


4. Open scatter_loading and select scatter file
SW---> SW Primo_R3_V1.0.5 MT6582_Android_scatter


5. Click Firmware->Upgrade and connect USB cable with mobile (mobile must be off)
6. Then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.




Bro
Dipankor-ctg

[Dipankor-ctg]

Originally Posted by bipugunjan

need walpad 8b 6582 flash file

Here your Need Firmware

http://forum.gsmhosting.com/vbb/11393705-post74.html

Br
Dipankor-ctg

[bipugunjan]

Originally Posted by Dipankor-ctg

Here your Need Firmware

http://forum.gsmhosting.com/vbb/11393705-post74.html

Br
Dipankor-ctg

read my post carefully need walpad 8b 6582 6582 6582
not 6589 this file is 6589 6589 6589.

[>>Gsmmilon>>]

Walton Primo HM2 Factory Firmware Please

SEE miracle Box info..

Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6582 SW:0001 Ver: CA01
Downloading Boot11 ...
EMMC Size: 0x01D2000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
>>Done.

[Dipankor-ctg]

Originally Posted by bipugunjan

read my post carefully need walpad 8b 6582 6582 6582
not 6589 this file is 6589 6589 6589.

before you post use "search" & follow "my thread"

Bro
Dipankor-ctg

[Dipankor-ctg]

Originally Posted by >>Gsmmilon>>

Walton Primo HM2 Factory Firmware Please

SEE miracle Box info..

Set MediaTek PreLoader USB VCOM Port (COM19)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6582 SW:0001 Ver: CA01
Downloading Boot11 ...
EMMC Size: 0x01D2000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
>>Done.

Flash Tool Instruction of WALTON PRIMO RM2

Download Link- Walton Primo RM2 Firmware

1. Install driver
2. Open Flash Tool
3. Open scatter_loading and select scatter file (Walton_Rm2_V04_20150608àMT6582_Android_scatter)

4. Click Firmware Upgrade then select Download and then connect USB cable with mobile (mobile must be off)

5. Then start downloading/flashing firmware

6. When it shows Download Ok, it means the installation/flashing firmware is completed.





Bro
Dipankor-ctg
Paid Unlock Team

[shohag gsm2]

Originally Posted by Dipankor-ctg

Flash Tool Instruction of WALTON PRIMO RM2

Download Link- Walton Primo RM2 Firmware

1. Install driver
2. Open Flash Tool
3. Open scatter_loading and select scatter file (Walton_Rm2_V04_20150608àMT6582_Android_scatter)

4. Click Firmware Upgrade then select Download and then connect USB cable with mobile (mobile must be off)

5. Then start downloading/flashing firmware

6. When it shows Download Ok, it means the installation/flashing firmware is completed.





Bro
Dipankor-ctg
Paid Unlock Team

Primo HM2 File Need No RM2

This Firmware Primo RM2

[Dipankor-ctg]

Walpad Pro Camera Driver Installation After Upgrading to Windows

Procedure-



1. At first unzip the file named “Walpad Pro Camera Driver”



2. Then copy the “Walpad Pro Camera Driver” in your Walpad Pro Windows Tab.



3. After this you need to install the “Camera Driver.exe” file to your Walpad Pro.



4. When the installation is finished, you have to restart your Walpad Pro for activating Camera.



5. If everything is “Okay” then you will see your Camera is working.





Download Link of Windows 10 Camera Driver Setup- http://www.mediafire.com/download/1i...era_Driver.rar



Download the above file and follow step by step guide for installing Camera Driver of Windows 10

Bro
Dipankor-ctg

[mohammadsumon53]

Invalid or Deleted File.

The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.

Still have questions, or think we've made a mistake? Please contact support for further assistance.

[shaongsm]

Walton GH+ firmware need ,, walton forum file not work,,, flash after only logo,,, another file need or bin file,,,,,,,,,, set condition only logo....