|
Congratulations to me Z310 and W200 CID52 Unlocked with logs !!! Just unlocked z310 (pnx5230) and w200 (db2012) cid52 after 3 days of waiting, so congratulations to me!!!! w200 log: v0.914021/UNI CARD SERIAL: 00049081 Loaded 51 flash descriptors ChipID:D000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok phone CID not supported in that mode Elapsed:35 secs. SERVER SUPPORT ENABLED. ChipID:D000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM16 PHONE READY TO PROCEED. Connecting to server seed is:00FC2936 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:155 secs. SERVER SUPPORT ENABLED. ChipID:8040,EMP protocol:0301 NEW SECURITY MODEL DETECTED PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35619601944010 CERT:RED LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738 Flash ID check:2019 Flash props sent ok LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009 Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM19 PHONE READY TO PROCEED. Connecting to server seed is:0097F0E8 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:74 secs. z310 log: v0.914021/UNI CARD SERIAL: 00049081 Loaded 51 flash descriptors ChipID:D000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok phone CID not supported in that mode Elapsed:35 secs. SERVER SUPPORT ENABLED. ChipID:D000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM16 PHONE READY TO PROCEED. Connecting to server seed is:00FC2936 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:155 secs. |
hi, how did u doing that? br |
Quote:
can u explan how did u unlock those phones thats only logs u using universal box we neeed more details about that thanks |
jawad log..clearly mentioning tht..he did his wrk in setool... actually for the past 2 to 3 days..server s closed...!!! aftr a long wait,he unlockd those 2 phones via setool.. for ur info..unlock thro setool for the db2012 cid 52 cost 10 logs..also for pnx(z310) cost 10 logs.. weras for db2012 cid 51 cost only 1 log.. good luck |
Quote:
is the server still closed ?? & i use cruiser not setool :) for that i asked him about his logs thanks |
I used setool box with 20 logs,10 for each one the procedure takes 3 days for me |
For hwo much u unlock z310 ? |
Quote:
To patch for unlock / IMEI change DB2020 CID49/51 you still need 1 log. To patch for unlock / IMEI change DB2012 CID50/51 you still need 1 log. To patch for unlock PNX5230 (Z310) CID51 you still need 1 log. To permanent unlock DB2020 CID 49/51/52 still cost 10 logs. To permanent unlock DB2012 CID50/51 still cost 4 logs. To permanent unlock DB2012 CID52 still needs 10 logs. To permanent unlock PNX5230 CID52 (Z310) still needs 10 logs. To permanent unlock / IMEI change PDA with OLD SECURITY is still free. To permanent unlock PDA with NEW SECURITY still cost 4 logs. To permanent unlock CID53 phones (P1, W960) still needs 10 logs. To permanent unlock A2 phones (W910, K850, etc) still needs 10 logs. To permanent unlock / IMEI change any DB2000 phone is still free. To permanent unlock / IMEI change any DB2010 phone is still free. To permanent unlock any CALYPSO LITE phone is still free. |
With Davinci server i unlocked them in the same day !! service is very fast and never stopped !! br |
Quote:
i use it from time to time when setool server & UB closed or have delay;) Br;) LordMen00 |
People, somebody tell me, do I have to have the Setool Box ? and what is the price equivalent to 10 logs ? and how much foor davinci ? have some pieces z310 cid52 to unlock. |
10 logs to unlock z310 cid52 ?????????????????????? |
| All times are GMT +1. The time now is 19:35. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -