Congratulations to me Z310 and W200 CID52 Unlocked with logs !!! - GSM-Forum

jawad8305 · 01-15-2008, 12:07

Just unlocked z310 (pnx5230) and w200 (db2012) cid52 after 3 days of waiting, so congratulations to me!!!!

w200 log:
v0.914021/UNI
CARD SERIAL: 00049081
Loaded 51 flash descriptors
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
phone CID not supported in that mode
Elapsed:35 secs.
SERVER SUPPORT ENABLED.
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED.
Connecting to server
seed is:00FC2936
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:155 secs.
SERVER SUPPORT ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35619601944010 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:2019
Flash props sent ok
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM19
PHONE READY TO PROCEED.
Connecting to server
seed is:0097F0E8
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:74 secs.

z310 log:
v0.914021/UNI
CARD SERIAL: 00049081
Loaded 51 flash descriptors
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
phone CID not supported in that mode
Elapsed:35 secs.
SERVER SUPPORT ENABLED.
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED.
Connecting to server
seed is:00FC2936
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:155 secs.

szmit4 · 01-15-2008, 12:39

hi, how did u doing that?

br

mony_valley · 01-15-2008, 12:49

Quote:

Originally Posted by jawad8305

Just unlocked z310 (pnx5230) and w200 (db2012) cid52 after 3 days of waiting, so congratulations to me!!!!

w200 log:
v0.914021/UNI
CARD SERIAL: 00049081
Loaded 51 flash descriptors
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
phone CID not supported in that mode
Elapsed:35 secs.
SERVER SUPPORT ENABLED.
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED.
Connecting to server
seed is:00FC2936
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:155 secs.
SERVER SUPPORT ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35619601944010 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:2019
Flash props sent ok
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM19
PHONE READY TO PROCEED.
Connecting to server
seed is:0097F0E8
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:74 secs.

z310 log:
v0.914021/UNI
CARD SERIAL: 00049081
Loaded 51 flash descriptors
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
phone CID not supported in that mode
Elapsed:35 secs.
SERVER SUPPORT ENABLED.
ChipID

000,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:230400
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED
LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
Flash ID check:2019
Flash props sent ok
LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
Executing CSCA-based unlock.
Asking for EROM signature...
Waiting for calculation process...
RESPONSE: "SUCCESS" (1038)
Backup security data...
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED.
Connecting to server
seed is:00FC2936
Phone succefully unlocked. USERCODE RESET TO "0000"
Elapsed:155 secs.

hello jawad
can u explan how did u unlock those phones
thats only logs
u using universal box
we neeed more details about that
thanks

.::koolfriend4u::. · 01-15-2008, 13:11

jawad log..clearly mentioning tht..he did his wrk in setool...

actually for the past 2 to 3 days..server s closed...!!!

aftr a long wait,he unlockd those 2 phones via setool..

for ur info..unlock thro setool for the db2012 cid 52 cost 10 logs..also for pnx(z310) cost 10 logs..

weras for db2012 cid 51 cost only 1 log..

good luck

mony_valley · 01-15-2008, 13:54

Quote:

Originally Posted by .::koolfriend4u::.

jawad log..clearly mentioning tht..he did his wrk in setool...

actually for the past 2 to 3 days..server s closed...!!!

aftr a long wait,he unlockd those 2 phones via setool..

for ur info..unlock thro setool for the db2012 cid 52 cost 10 logs..also for pnx(z310) cost 10 logs..

weras for db2012 cid 51 cost only 1 log..

good luck

thanks bro for that explan
is the server still closed ??
& i use cruiser not setool

for that i asked him about his logs
thanks

jawad8305 · 01-15-2008, 16:56

I used setool box with 20 logs,10 for each one the procedure takes 3 days for me

dynamic-gsm · 01-15-2008, 17:16

For hwo much u unlock z310 ?

DARIFBS · 01-15-2008, 18:11

Quote:

Originally Posted by dynamic-gsm

For hwo much u unlock z310 ?

Patch is for unlock / IMEI change ONLY into DB2020 CID52 phones. This process is free.

To patch for unlock / IMEI change DB2020 CID49/51 you still need 1 log.
To patch for unlock / IMEI change DB2012 CID50/51 you still need 1 log.
To patch for unlock PNX5230 (Z310) CID51 you still need 1 log.
To permanent unlock DB2020 CID 49/51/52 still cost 10 logs.
To permanent unlock DB2012 CID50/51 still cost 4 logs.
To permanent unlock DB2012 CID52 still needs 10 logs.
To permanent unlock PNX5230 CID52 (Z310) still needs 10 logs.
To permanent unlock / IMEI change PDA with OLD SECURITY is still free.
To permanent unlock PDA with NEW SECURITY still cost 4 logs.
To permanent unlock CID53 phones (P1, W960) still needs 10 logs.
To permanent unlock A2 phones (W910, K850, etc) still needs 10 logs.
To permanent unlock / IMEI change any DB2000 phone is still free.
To permanent unlock / IMEI change any DB2010 phone is still free.
To permanent unlock any CALYPSO LITE phone is still free.

infogsm · 01-15-2008, 23:30

With Davinci server i unlocked them in the same day !! service is very fast and never stopped !!
br

LordMen007 · 01-15-2008, 23:45

Quote:

Originally Posted by infogsm

With Davinci server i unlocked them in the same day !! service is very fast and never stopped !!
br

yea sure but more expansive than setool

i use it from time to time when setool server & UB closed or have delay

Br

LordMen00

yurais · 01-22-2008, 04:33

People, somebody tell me, do I have to have the Setool Box ? and what is the price equivalent to 10 logs ? and how much foor davinci ? have some pieces z310 cid52 to unlock.

MOURAD™ · 04-09-2008, 12:23

10 logs to unlock z310 cid52 ??????????????????????

01-15-2008, 12:07	#1 (permalink)
jawad8305 No Life Poster Join Date: Nov 2005 Location: Morocco-Khenifra Posts: 2,185 Member: 198621 Status: Offline Sonork: 100.1591649 Thanks: 809 Thanked 862 Times in 247 Posts	Congratulations to me Z310 and W200 CID52 Unlocked with logs !!! Just unlocked z310 (pnx5230) and w200 (db2012) cid52 after 3 days of waiting, so congratulations to me!!!! w200 log: v0.914021/UNI CARD SERIAL: 00049081 Loaded 51 flash descriptors ChipID000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok phone CID not supported in that mode Elapsed:35 secs. SERVER SUPPORT ENABLED. ChipID000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM16 PHONE READY TO PROCEED. Connecting to server seed is:00FC2936 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:155 secs. SERVER SUPPORT ENABLED. ChipID:8040,EMP protocol:0301 NEW SECURITY MODEL DETECTED PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35619601944010 CERT:RED LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738 Flash ID check:2019 Flash props sent ok LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009 Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM19 PHONE READY TO PROCEED. Connecting to server seed is:0097F0E8 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:74 secs. z310 log: v0.914021/UNI CARD SERIAL: 00049081 Loaded 51 flash descriptors ChipID000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok phone CID not supported in that mode Elapsed:35 secs. SERVER SUPPORT ENABLED. ChipID000,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:230400 OTP LOCKED:1 CID:51 PAF:1 IMEI:35464001986518 CERT:RED LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER Flash ID check:2019 Flash props sent ok LDR:070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER Executing CSCA-based unlock. Asking for EROM signature... Waiting for calculation process... RESPONSE: "SUCCESS" (1038) Backup security data... loader startup: executed loader GDFS startup: executed loader unlock: executed Erasing locks... DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN. BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS SEARCHING FOR PHONE, "STOP" TO ABORT PHONE FOUND AT COM16 PHONE READY TO PROCEED. Connecting to server seed is:00FC2936 Phone succefully unlocked. USERCODE RESET TO "0000" Elapsed:155 secs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
HOW TO UNLOCK K320 ,Z310 and W200 CID 50,CID 51,CID52	Eagle7	SETool2	56	03-31-2011 22:27
W200 CID52 Unlock Successfull Within 20 Minutes With SETOOL	shahzaadbutt	SETool2	41	12-26-2007 15:14
z310,w910 and w200 cid52 unlock !!!!!!!	gsmjunction	Cruiser Suite	26	12-26-2007 00:00
unlock z310 and w200i cid52 error help me plz	meknes gsm	SETool2	4	12-11-2007 21:32
i have z310 and w200 I want to unlock by setool	samirstare	Sony Ericsson	6	11-22-2007 11:52

01-15-2008, 12:39	#2 (permalink)
szmit4 Freak Poster Join Date: May 2004 Location: poland, chelm Age: 34 Posts: 161 Member: 65489 Status: Offline Thanks: 7 Thanked 5 Times in 4 Posts	hi, how did u doing that? br

01-15-2008, 13:11	#4 (permalink)
.::koolfriend4u::. No Life Poster Join Date: Nov 2005 Posts: 1,426 Member: 200145 Status: Offline Sonork: 100.1596786 Thanks: 785 Thanked 622 Times in 273 Posts	jawad log..clearly mentioning tht..he did his wrk in setool... actually for the past 2 to 3 days..server s closed...!!! aftr a long wait,he unlockd those 2 phones via setool.. for ur info..unlock thro setool for the db2012 cid 52 cost 10 logs..also for pnx(z310) cost 10 logs.. weras for db2012 cid 51 cost only 1 log.. good luck

01-15-2008, 16:56	#6 (permalink)
jawad8305 No Life Poster Join Date: Nov 2005 Location: Morocco-Khenifra Posts: 2,185 Member: 198621 Status: Offline Sonork: 100.1591649 Thanks: 809 Thanked 862 Times in 247 Posts	I used setool box with 20 logs,10 for each one the procedure takes 3 days for me

01-15-2008, 17:16	#7 (permalink)
dynamic-gsm No Life Poster Join Date: Jul 2005 Location: In Original_Space Age: 31 Posts: 572 Member: 166385 Status: Offline Thanks: 11 Thanked 282 Times in 33 Posts	For hwo much u unlock z310 ?

01-15-2008, 23:30	#9 (permalink)
infogsm Cheater -Don't Deal with him- Join Date: Nov 2002 Location: Tunisia Age: 34 Posts: 4,345 Member: 18022 Status: Offline Sonork: 1574868 Thanks: 101 Thanked 194 Times in 97 Posts	With Davinci server i unlocked them in the same day !! service is very fast and never stopped !! br

01-22-2008, 04:33	#11 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Posts: 1,351 Member: 220595 Status: Offline Thanks: 38 Thanked 73 Times in 45 Posts	People, somebody tell me, do I have to have the Setool Box ? and what is the price equivalent to 10 logs ? and how much foor davinci ? have some pieces z310 cid52 to unlock.

04-09-2008, 12:23	#12 (permalink)
MOURAD™ No Life Poster Join Date: Mar 2007 Location: Guangzhou-China Posts: 1,270 Member: 468587 Status: Offline Sonork: 100.1612429 Thanks: 318 Thanked 677 Times in 404 Posts	10 logs to unlock z310 cid52 ??????????????????????