e15i helpp unlock faild - GSM-Forum

bozogsm · 08-04-2011, 12:38

4 credit ok unlock faild

EROM "R8A029" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"

PHONE IMEI:01256000641585

REMOVE SIM CARD FROM PHONE
FULLY POWER ON PHONE
ENABLE "USB DEBUGGING" IN PHONE:
MENU,SETTINGS,APPLICATIONS,DEVELOPMENT
INSTALL ADB DRIVERS IF NEEDED

MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE

WARMING UP...
GETTING ROOT ACCESS ...
APPLYING ROOT RIGHTS ...
PROCESSING ...
failed, err: []
Unlock FAILED
Elapsed: 68 secs.

SHOEB AHMED · 08-04-2011, 14:46

q:
which s1 android based phones i can unlock using alternative security bypass ?

a:
you can use that method for
x10i,x10i,s0-o1b, e10,e15,e16,u20 phones.

q:
how to unlock s1 android based phones using alternative security bypass ?

a:
Here is procedure.

1.
make sure you have firmware with android 2.x, NOT 1.6.
flash required firmware, if needed.

2.
power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging"
connect phone to PC, install drivers from setool2 distr ( drivers\ADB_Drivers)

hint:
i suggest to import DisableADBNumbering.reg, however that is not required.

3.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
press unlock

when prompted, detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )

when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.

after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.

DO NOT DETACH PHONE FROM CABLE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP

possible problems:

you getting "err: 00000005","err: 00000002" during process.

solution:
disable antivirus, especially if you using "koshmarsky antivirus", i recommend Doctor Web
do NOT run setool2 from restricted accounts.
do NOT run setool2 from read-only media.

problem:
it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot

solution:
IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.

if not, well, repeat from start.

SHOEB AHMED · 08-04-2011, 14:50

Quote:

Originally Posted by bozogsm

4 credit ok unlock faild

EROM "R8A029" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"

PHONE IMEI:01256000641585

REMOVE SIM CARD FROM PHONE
FULLY POWER ON PHONE
ENABLE "USB DEBUGGING" IN PHONE:
MENU,SETTINGS,APPLICATIONS,DEVELOPMENT
INSTALL ADB DRIVERS IF NEEDED

MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE

WARMING UP...
GETTING ROOT ACCESS ...
APPLYING ROOT RIGHTS ...
PROCESSING ...
failed, err: []
Unlock FAILED
Elapsed: 68 secs.

use latest setool2 version
use usbflash drivers from latest setool2 version
use different usb port

sjumbo007 · 08-10-2011, 12:24

same me
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"

PHONE IMEI:01240300135230
Checking for signature ...
signature found, skipping calculation

REMOVE SIM CARD FROM PHONE
FULLY POWER ON PHONE
ENABLE "USB DEBUGGING" IN PHONE:
MENU,SETTINGS,APPLICATIONS,DEVELOPMENT
INSTALL ADB DRIVERS IF NEEDED

MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE

WARMING UP ...
GETTING ROOT ACCESS ...
APPLYING ROOT RIGHTS ...
PROCESSING ...
failed, err: []
Unlock FAILED
Elapsed: 99 secs.

top man · 08-10-2011, 13:55

Quote:

Originally Posted by sjumbo007

same me
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"

PHONE IMEI:01240300135230
Checking for signature ...
signature found, skipping calculation

REMOVE SIM CARD FROM PHONE
FULLY POWER ON PHONE
ENABLE "USB DEBUGGING" IN PHONE:
MENU,SETTINGS,APPLICATIONS,DEVELOPMENT
INSTALL ADB DRIVERS IF NEEDED

MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE

WARMING UP ...
GETTING ROOT ACCESS ...
APPLYING ROOT RIGHTS ...
PROCESSING ...
failed, err: []
Unlock FAILED
Elapsed: 99 secs.

same problem me also
i did unlock u20i unlock failed but eat my 5 credits

top man · 08-10-2011, 14:13

yup my u20i unlock done
just disabled your antivirus thats it
use sign mode and alternative security bypasss

thanx for shoaib

08-04-2011, 12:38	#1 (permalink)
bozogsm Insane Poster Join Date: Jan 2008 Location: germany/ Posts: 99 Member: 671865 Status: Offline Thanks Meter: 15	e15i helpp unlock faild 4 credit ok unlock faild EROM "R8A029" AID: 0001 SOFTWARE AID: 0001 LOADER AID: 0001 FLASH ID: "00EC/00BC" LOADER VERSION: "R4A045" PHONE IMEI:01256000641585 REMOVE SIM CARD FROM PHONE FULLY POWER ON PHONE ENABLE "USB DEBUGGING" IN PHONE: MENU,SETTINGS,APPLICATIONS,DEVELOPMENT INSTALL ADB DRIVERS IF NEEDED MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE WARMING UP... GETTING ROOT ACCESS ... APPLYING ROOT RIGHTS ... PROCESSING ... failed, err: [] Unlock FAILED Elapsed: 68 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

08-04-2011, 14:46	#2 (permalink)
SHOEB AHMED No Life Poster Join Date: Jul 2005 Location: player /-GSM-\ Field Posts: 3,612 Member: 161115 Status: Offline Sonork: Here you can find it... Thanks Meter: 3,039	q: which s1 android based phones i can unlock using alternative security bypass ? a: you can use that method for x10i,x10i,s0-o1b, e10,e15,e16,u20 phones. q: how to unlock s1 android based phones using alternative security bypass ? a: Here is procedure. 1. make sure you have firmware with android 2.x, NOT 1.6. flash required firmware, if needed. 2. power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging" connect phone to PC, install drivers from setool2 distr ( drivers\ADB_Drivers) hint: i suggest to import DisableADBNumbering.reg, however that is not required. 3. select proper phone model. on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset press unlock when prompted, detach phone, turn it on fully, connect it again. ( or you can leave phone on cable, then power it on manually ) when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode. after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete. DO NOT DETACH PHONE FROM CABLE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP possible problems: you getting "err: 00000005","err: 00000002" during process. solution: disable antivirus, especially if you using "koshmarsky antivirus", i recommend Doctor Web do NOT run setool2 from restricted accounts. do NOT run setool2 from read-only media. problem: it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot solution: IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue. if not, well, repeat from start.

08-10-2011, 12:24	#4 (permalink)
sjumbo007 Junior Member Join Date: Aug 2001 Location: thailand Posts: 38 Member: 6074 Status: Offline Thanks Meter: 3	same me RUNNING S1_EROM VER "R8A029" SOFTWARE AID: 0001 LOADER AID: 0001 FLASH ID: "0020/00BC" LOADER VERSION: "R4A045" PHONE IMEI:01240300135230 Checking for signature ... signature found, skipping calculation REMOVE SIM CARD FROM PHONE FULLY POWER ON PHONE ENABLE "USB DEBUGGING" IN PHONE: MENU,SETTINGS,APPLICATIONS,DEVELOPMENT INSTALL ADB DRIVERS IF NEEDED MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE WARMING UP ... GETTING ROOT ACCESS ... APPLYING ROOT RIGHTS ... PROCESSING ... failed, err: [] Unlock FAILED Elapsed: 99 secs.

08-10-2011, 14:13	#6 (permalink)
top man No Life Poster Join Date: Oct 2007 Location: AROUND THE WORLD Posts: 500 Member: 617412 Status: Offline Thanks Meter: 177	yup my u20i unlock done just disabled your antivirus thats it use sign mode and alternative security bypasss thanx for shoaib