finally x10 boot repair done with setool - Page 3 - GSM-Forum

yordan · 04-10-2014, 11:02

Quote:

Originally Posted by c_ahmad79

as laser said wait for the gpg cable he is rite
better wait for the gpg cable
br

hey frend do u can help me to repair my sony i need to know about the RX TX GND and the other cable yellow that u show in the pic. in setool what mark in settings ? what operation choose, you doit pleas help me i try to do this cable but no fuction it.

c_ahmad79 · 04-14-2014, 19:21

Quote:

Originally Posted by yordan

hey frend do u can help me to repair my sony i need to know about the RX TX GND and the other cable yellow that u show in the pic. in setool what mark in settings ? what operation choose, you doit pleas help me i try to do this cable but no fuction it.

you can see rx,tx,gnd on pic
ignore the yellow wire

Regards

yordan · 04-14-2014, 23:19

Quote:

Originally Posted by c_ahmad79

you can see rx,tx,gnd on pic
ignore the yellow wire

Regards

ok RX from box to TX on the phone and TX from box to RX on the phone ???

guldaz2040 · 12-22-2014, 10:29

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
ATTACH USB CABLE TO PHONE,THEN PRESS "READY"

PROCESSING ...
qcReceivePacket: can't get packet start.
Elapsed: 18 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
ATTACH USB CABLE TO PHONE,THEN PRESS "READY"

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION

koperta4512 · 12-22-2014, 20:11

Check pinouts and need connect USB cable

guldaz2040 · 12-23-2014, 05:27

i have gpg resurection cable, already connect to usb but still got some errors,, i'll the logs laters , do i need to put file in misc what are the setting i use setting 1,2 then use tp

koperta4512 · 12-23-2014, 16:24

GPG cable are made in two standards: IP pinouts and GPG/Unibox pinouts.
If you white/Fusion need IP standard and Gold/Platinum box is GPG/Unibox pinouts.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-23-1999 15:48
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

12-22-2014, 10:29	#34 (permalink)
guldaz2040 Junior Member Join Date: Mar 2006 Posts: 11 Member: 238993 Status: Offline Thanks Meter: 0	DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT ATTACH USB CABLE TO PHONE,THEN PRESS "READY" PROCESSING ... qcReceivePacket: can't get packet start. Elapsed: 18 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110000000010 DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT ATTACH USB CABLE TO PHONE,THEN PRESS "READY" PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" qcReceivePacket: can't get packet start. IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION

12-22-2014, 20:11	#35 (permalink)
koperta4512 No Life Poster Join Date: Dec 2011 Location: Poland Posts: 1,166 Member: 1704846 Status: Offline Sonork: 1617108 Thanks Meter: 117	Check pinouts and need connect USB cable

12-23-2014, 05:27	#36 (permalink)
guldaz2040 Junior Member Join Date: Mar 2006 Posts: 11 Member: 238993 Status: Offline Thanks Meter: 0	i have gpg resurection cable, already connect to usb but still got some errors,, i'll the logs laters , do i need to put file in misc what are the setting i use setting 1,2 then use tp

12-23-2014, 16:24	#37 (permalink)
koperta4512 No Life Poster Join Date: Dec 2011 Location: Poland Posts: 1,166 Member: 1704846 Status: Offline Sonork: 1617108 Thanks Meter: 117	GPG cable are made in two standards: IP pinouts and GPG/Unibox pinouts. If you white/Fusion need IP standard and Gold/Platinum box is GPG/Unibox pinouts.