Help Me Tm717 Dead How To Flash Phone - GSM-Forum

Gsm. · 03-28-2010, 08:14

RUNNING v*************
CARD SERIAL 0***************
PLEASE UPGRADE USBFLASH DRIVER 02.02.00.00
SIGNED MODE (USING SERVER)
CFG:100110000000
ChipID

900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,53,1,35697903078604]
OTP LOCKED:1 CID:53 PAF:1 IMEI:35697903078604 CERT:BROWN
LDR:2009-07-31 10:49 1207-6245_DB3200_PRODUCTION_LOADER_ACC_SDRAM_R2A084
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:2009-07-31 10:45 1207-6252_DB3200_EXPLORER_LOADER_APP_SDRAM_R2A084
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
writing "C:\Documents and Settings\waqas\Desktop\R1GA032_APP_SW_1224_0545_CH INA_SC_ET_REDBROWNBLUE_CID53_52_49_DB3200.software "
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:53
Will flash 791 blocks...
ssw file accepted
writing "C:\Documents and Settings\waqas\Desktop\R1GA032_FS_CHINA_UNICOM_ET_ REDBROWNBLUE_CID53_52_49.software"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:53
Will flash 1302 blocks...
ssw file accepted
LDR:2009-04-21 18:19 1207-6250_DB3200_CS_LOADER_ACC_SDRAM_R2A081
LDR:2009-04-21 18:20 1207-6251_DB3200_CS_LOADER_APP_SDRAM_R2A081
[a2_usercode_reset] failed, err:005A
Elapsed: 352 secs.

xerraco · 03-28-2010, 08:39

Load Main + Fs in Settings: Signed Mode & Customize Phone or Load Main + FS, in Misc Field:Load CustPack: in Settings: Signed Mode then Flash.

If still get error choose NONE in "ECC Mode"

adhermie · 03-28-2010, 10:17

choose t707 as model
use t707 flash file

then flash as usual......

good luck...

089999945 · 03-28-2010, 10:35

U can unlock with UltimateUnlocker Is Ok.
I tested 100%.

roney_nexus · 03-28-2010, 10:42

security data damaged, unlock phone using altbypass mode.

algerienbox · 03-28-2010, 11:27

1- to flash A2 you need:
*costomize affter flash
*boot phone xith "c" not with 2+5
2-change your seeting
*use costomize affter flash that all
3-use ECC mode NONE1 if dont work change it to NONE 0
4-try a diffrent firmware
5-try to unlock it

shahzaadbutt · 03-28-2010, 11:55

Look Here

Help Me Tm717 Dead How To Flash Phone

algerienbox · 03-28-2010, 12:01

Quote:

Originally Posted by shahzaadbutt

Look Here

Help Me Tm717 Dead How To Flash Phone

Yes repair security with unlock then flash your phone thanks man

Sonu Jawed · 06-24-2010, 09:48

Maybe Here Is The Solution of your problem

Click Here

B.r.,
Sonu

mobile tech!! · 09-07-2010, 17:12

this is how i got my phone working after dead. setool

i flash with t717 flash file from support. and nothing happen, phone still dead

so i did this 1. setool2 v.1088
2. use SEMC A2 tab USE PHONE TYPE: F100_JALOU
3. go to setting tick SIGNED MODE, ENABLE ALTE... BYPASS
4. REVERT COLOR TO "RED" AFTER UN/FLSH
5. HIT THE UNLOCK/REPAIR

WAIT TILL EVERYTHING DONE, THATS HOW I MY MY PHONE WORKING 100%

ramsey1976 · 11-16-2010, 17:59

Quote:

Originally Posted by mobile tech!!

this is how i got my phone working after dead. setool

i flash with t717 flash file from support. and nothing happen, phone still dead

so i did this 1. setool2 v.1088
2. use SEMC A2 tab USE PHONE TYPE: F100_JALOU
3. go to setting tick SIGNED MODE, ENABLE ALTE... BYPASS
4. REVERT COLOR TO "RED" AFTER UN/FLSH
5. HIT THE UNLOCK/REPAIR

WAIT TILL EVERYTHING DONE, THATS HOW I MY MY PHONE WORKING 100%

my guy your too much you realy solve my problem 10000%

BINGO10 · 10-09-2012, 23:02

U da boss.....it fixed mine too....thanks

03-28-2010, 08:14	#1 (permalink)
Gsm. Banned Join Date: Jan 2010 Location: Now We Back With LGTool Posts: 408 Member: 1216493 Status: Offline Sonork: 100.1590644 Thanks Meter: 1,355	Help Me Tm717 Dead How To Flash Phone RUNNING v*********** CARD SERIAL 0************* PLEASE UPGRADE USBFLASH DRIVER 02.02.00.00 SIGNED MODE (USING SERVER) CFG:100110000000 ChipID900,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,53,1,35697903078604] OTP LOCKED:1 CID:53 PAF:1 IMEI:35697903078604 CERT:BROWN LDR:2009-07-31 10:49 1207-6245_DB3200_PRODUCTION_LOADER_ACC_SDRAM_R2A084 LDR CAPS:SYSTEM FLASH SIGNATURE LDR:2009-07-31 10:45 1207-6252_DB3200_EXPLORER_LOADER_APP_SDRAM_R2A084 LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA writing "C:\Documents and Settings\waqas\Desktop\R1GA032_APP_SW_1224_0545_CH INA_SC_ET_REDBROWNBLUE_CID53_52_49_DB3200.software " ALLOWED DOMAINS:BLUE BROWN RED MAXIMUM CID:53 Will flash 791 blocks... ssw file accepted writing "C:\Documents and Settings\waqas\Desktop\R1GA032_FS_CHINA_UNICOM_ET_ REDBROWNBLUE_CID53_52_49.software" ALLOWED DOMAINS:BLUE BROWN RED MAXIMUM CID:53 Will flash 1302 blocks... ssw file accepted LDR:2009-04-21 18:19 1207-6250_DB3200_CS_LOADER_ACC_SDRAM_R2A081 LDR:2009-04-21 18:20 1207-6251_DB3200_CS_LOADER_APP_SDRAM_R2A081 [a2_usercode_reset] failed, err:005A Elapsed: 352 secs.

09-07-2010, 17:12	#10 (permalink)
mobile tech!! Freak Poster Join Date: Aug 2008 Location: ware it maters most !! Posts: 240 Member: 829776 Status: Offline Sonork: 100.1653701 Thanks Meter: 17	Tm717 lives after death. this is how i got my phone working after dead. setool i flash with t717 flash file from support. and nothing happen, phone still dead so i did this 1. setool2 v.1088 2. use SEMC A2 tab USE PHONE TYPE: F100_JALOU 3. go to setting tick SIGNED MODE, ENABLE ALTE... BYPASS 4. REVERT COLOR TO "RED" AFTER UN/FLSH 5. HIT THE UNLOCK/REPAIR WAIT TILL EVERYTHING DONE, THATS HOW I MY MY PHONE WORKING 100%

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
haier c2000 Dead how to flash? pls help	kariakala	Various CDMA/TDMA Cell Phones	1	02-12-2010 08:21
please help me t339 dead after full flash	sajidashraf	UST Pro II	0	05-02-2009 16:53
hi all i am new in vygis box plz help me how to flash phones	unlock_solution	VygisToolbox	0	10-17-2007 17:00
S200 dead. how to flash ? which 1 cable to use ?	the_frightener	Trident/AGERE Platform	0	04-18-2004 08:04

03-28-2010, 08:39	#2 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	Load Main + Fs in Settings: Signed Mode & Customize Phone or Load Main + FS, in Misc Field:Load CustPack: in Settings: Signed Mode then Flash. If still get error choose NONE in "ECC Mode"

03-28-2010, 10:17	#3 (permalink)
adhermie Freak Poster Join Date: May 2009 Location: PHIL islands Posts: 166 Member: 1029422 Status: Offline Thanks Meter: 36	choose t707 as model use t707 flash file then flash as usual...... good luck...

03-28-2010, 10:35	#4 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	U can unlock with UltimateUnlocker Is Ok. I tested 100%.

03-28-2010, 10:42	#5 (permalink)
roney_nexus No Life Poster Join Date: Jun 2006 Location: {JUST@PRAY@FOR@ME} Age: 39 Posts: 3,028 Member: 288504 Status: Offline Sonork: .:100.1587032:. Thanks Meter: 2,266	security data damaged, unlock phone using altbypass mode.

03-28-2010, 11:27	#6 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	1- to flash A2 you need: costomize affter flash boot phone xith "c" not with 2+5 2-change your seeting *use costomize affter flash that all 3-use ECC mode NONE1 if dont work change it to NONE 0 4-try a diffrent firmware 5-try to unlock it

03-28-2010, 11:55	#7 (permalink)
shahzaadbutt No Life Poster Join Date: Mar 2005 Location: Pakistan Posts: 6,101 Member: 123458 Status: Offline Sonork: 100.1594535 Thanks Meter: 3,421	Look Here Help Me Tm717 Dead How To Flash Phone

06-24-2010, 09:48	#9 (permalink)
Sonu Jawed No Life Poster Join Date: Feb 2007 Location: Pakistan Age: 36 Posts: 1,395 Member: 447849 Status: Offline Sonork: 100.1604076 Thanks Meter: 593	Maybe Here Is The Solution of your problem Click Here B.r., Sonu

10-09-2012, 23:02	#12 (permalink)
BINGO10 Junior Member Join Date: Jun 2007 Posts: 3 Member: 532421 Status: Offline Thanks Meter: 0	U da boss.....it fixed mine too....thanks