|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
04-16-2013, 16:16
| #1 (permalink) |
| Freak Poster   Join Date: May 2010 Location: Sadder, Karachi, Pakistan
Posts: 206
Member: 1298429 Status: Offline Sonork: 100.109487 Thanks Meter: 57 | -:IMEI Change HTC By LGE Tool Post Here :- Connecting with Desire HD To connect with this phone you should use special microSD cable. Press the button "Cable" to view pinout. In order to make microSD cable you should do the following: 1. Get microSD card (1Gb or 2Gb, don't use SDHC). 2. Get two thin wires. 3. Solder first wire to microSD to pin4(+2.8V..+3.3V). 4. Solder second wire to microSD to pin6(GND). 5. You can use any +3V source (even 2xAAA) as power supply. 6. Also you should use microSD card reader. 7. External power supply(+3V) needed only for the phone microSD reader. 8. Do not use external power supply with PC microSD reader. WARNING: Don't forget to click "Disconnect" at the end. Connected Receiving phone info In order to connect with phone you should: 1. Install HTC ADB drivers 2. Turn on the phone 3. Enable Debug mode in phone (Settings->Applications->USB Debug) 4. Check your Internet connection 5. Plug USB Cable WARNING: Don't forget to click "Disconnect" at the end. Probing ADB Interface... Android Debug Bridge version 1.0.29 Starting ADB server... Waiting for device... Device Found: HT11ERX21007 Waiting for data... Waiting for boot completion... Waiting for device id... Getting data... Serial Number: HT11ERX21007 Android Version: 2.3.3 Manufacturer: HTC Model: Desire HD Hardware: spade ROM Version: 2.37.707.3 BOOT Version: 0.85.0024 IMEI: 356299-04-564215-2 CID: VODAP021 / VODA-Australia Backup CID: HTC__044 Linux Kernel Version: 2.6.35.10-g3bf3222 Removing Root Privileges... Stopping ADB server... Info received Repairing IMEI Searching microSD disk... MicroSD disk found: Volume: I:\ Device: \\.\PhysicalDrive2 Label: Size: 1024000 Writing image to microSD disk... Writing image to microSD disk: OK Waiting for User's Actions... Searching microSD disk... MicroSD disk found: Volume: I:\ Device: \\.\PhysicalDrive1 Label: HTCTOOL Size: 1028096 Reading HBOOT... Connecting to server... Sending data to server... Receiving data from server... Patching IMEI: 356299045642178... Writing HBOOT... Waiting for User's Actions... IMEI: 356299-04-564217-8 IMEI successfully repaired |
 |
|
05-02-2013, 16:32
| #2 (permalink) |
| Freak Poster Join Date: May 2010 Location: Sadder, Karachi, Pakistan
Posts: 206
Member: 1298429 Status: Offline Sonork: 100.109487 Thanks Meter: 57 | LGE Tool version: 2.12 OS Version: Windows XP [NT 5.1] Service Pack 3 Administrative privileges: yes Locale: UnitedStates / English CPU frequency: 2192 MHz Total memory: 2037 MB Free memory: 1413 MB Free space on system disk C:\: 48.00 GB Free space on disk D:\: 61.00 GB Free space on disk E:\: 195.00 GB Free space on disk F:\: 69.00 GB Connecting with Inspire 4G To connect with this phone you should use special microSD cable. Press the button "Cable" to view pinout. In order to make microSD cable you should do the following: 1. Get microSD card (1Gb or 2Gb, don't use SDHC). 2. Get two thin wires. 3. Solder first wire to microSD to pin4(+2.8V..+3.3V). 4. Solder second wire to microSD to pin6(GND). 5. You can use any +3V source (even 2xAAA) as power supply. 6. Also you should use microSD card reader. 7. External power supply(+3V) needed only for the phone microSD reader. 8. Do not use external power supply with PC microSD reader. WARNING: Don't forget to click "Disconnect" at the end. Connected Receiving phone info In order to connect with phone you should: 1. Install HTC ADB drivers 2. Turn on the phone 3. Enable Debug mode in phone (Settings->Applications->USB Debug) 4. Check your Internet connection 5. Plug USB Cable WARNING: Don't forget to click "Disconnect" at the end. Probing ADB Interface... Android Debug Bridge version 1.0.29 Starting ADB server... Waiting for device... Device Found: HT15RT201500 Waiting for data... Waiting for boot completion... Waiting for device id... Getting data... Serial Number: HT15RT201500 Android Version: 2.3.3 Manufacturer: HTC Model: Desire HD Hardware: spade ROM Version: 2.47.502.7 BOOT Version: 0.85.0024 IMEI: 354455-04-786005-9 CID: CWS__001 / ATT Backup CID: CWS__001 Linux Kernel Version: 2.6.35.10-gd2564fb Removing Root Privileges... Stopping ADB server... Info received Repairing IMEI Searching microSD disk... MicroSD disk found: Volume: I:\ Device: \\.\PhysicalDrive2 Label: Size: 1024000 Writing image to microSD disk... Can't read sector: 2048 from PhysicalDrive Can't write to Physical SD Disk! Please close all other applications and try again. Action cancelled Repairing IMEI Searching microSD disk... MicroSD disk found: Volume: I:\ Device: \\.\PhysicalDrive2 Label: Size: 1024000 Writing image to microSD disk... Writing image to microSD disk: OK Waiting for User's Actions... Searching microSD disk... MicroSD disk found: Volume: I:\ Device: \\.\PhysicalDrive1 Label: HTCTOOL Size: 1028096 Reading HBOOT... Connecting to server... Sending data to server... Receiving data from server... Patching IMEI: 35892004346xxxx... Writing HBOOT... Waiting for User's Actions... IMEI: 358920-04-346xxx-x IMEI successfully repaired |
| |
| The Following User Says Thank You to A4Telecom For This Useful Post: |
|
08-09-2014, 11:30
| #3 (permalink) |
| Junior Member Join Date: Apr 2012
Posts: 26
Member: 1753790 Status: Offline Thanks Meter: 0 | Hello, I don't understand the soldering of the 2 thin wires, the USB cable has 5 pins no 6, do you have an image for realize the wiring ? 3. Solder first wire to microSD to pin4(+2.8V..+3.3V). 4. Solder second wire to microSD to pin6(GND). Need help Thanx |
| |
|
08-09-2014, 13:26
| #4 (permalink) | |
| No Life Poster  Join Date: Sep 2012 Location: UK
Posts: 1,245
Member: 1816005 Status: Online Thanks Meter: 299 | Quote:
| |
| |
|
08-09-2014, 17:54
| #5 (permalink) | |
| No Life Poster  Join Date: Sep 2004 Location: coast Age: 53
Posts: 2,097
Member: 83397 Status: Offline Thanks Meter: 204 | Quote:
| |
| |
|
08-09-2014, 19:00
| #6 (permalink) | |
| No Life Poster Join Date: Sep 2012 Location: UK
Posts: 1,245
Member: 1816005 Status: Online Thanks Meter: 299 | Quote:
| |
| |
|
08-10-2014, 06:58
| #7 (permalink) |
| No Life Poster Join Date: Sep 2004 Location: coast Age: 53
Posts: 2,097
Member: 83397 Status: Offline Thanks Meter: 204 | mostly unlocking, currently don't have phone in hand but if you can give brief tutorial how to use this cable will be very helpful.or you can use any phone as example.Thanks |
| |
|
08-12-2014, 07:37
| #8 (permalink) |
| Junior Member Join Date: Apr 2012
Posts: 26
Member: 1753790 Status: Offline Thanks Meter: 0 | Hello, Answer to A4Telecom : Thank you for answering me about changing the HTC Desire HD IMEI. I don't understand your method : Fistly, you say : Press the button "Cable" to view pinout, I don't see the "Cable button" ? When could I find this button ? Once, soldering a cable with the microSD : pinout 4 to +3.3V and 6 to GND. I don't see any connections between microSD and the phone ? Do you have a global map for connections between microSD, PC and phone ? Best Regards |
| |
|
| Bookmarks |
| |
|
|
Linear Mode
