K608i Dead after unlock. Need to flash - GSM-Forum

icedragon69 · 12-06-2006, 15:29

I tried unlocking a SE K608i with my new SETool Box 3.

Unlock said it was done but now the phone will not turn on.

I have tried to flash it but I have never used the SEtool before so I don’t no if I am doing it right but it says complete but still does not turn on.

Jeffyoh88 · 12-06-2006, 20:37

icedragon69
u try use crusier flash this phone...
step below here...
1 connect phone
2 unlock rsa
3 direct unlock
4 flash arm
5 flash fs
6 customine
7 complete ...
good luck man

Kashif Khan · 12-06-2006, 20:52

Quote:

Originally Posted by Jeffyoh88

icedragon69
u try use crusier flash this phone...
step below here...
1 connect phone
2 unlock rsa
3 direct unlock
4 flash arm
5 flash fs
6 customine
7 complete ...
good luck man

You are totally wrong dear,he is trying with setool not with cruiser,
Man if you have CID 36 so you need to convert back to RED,
If you have cid49 so you need restoration file,i hope my info will help you.
BR
Kashif Khan

James-R · 12-06-2006, 21:06

k608i is cid37, the answer is easy, but he should to search.

br

Irfangk786 · 12-06-2006, 21:34

yes Kashif is right brother first of all click "identfy"and see what is the cid?
to unlock cid 36 direct unlock ,for cid37 in setting check "revert to red"option.and for cid u mest have :rest: files in rest folder of setool.to download rest files go to support aria of setool.always use latest virsion of software.and for complete help plz send log.

icedragon69 · 12-07-2006, 09:40

i have tried and near the end it says phone detached and stops. it is cid37

BROWSE13 · 12-07-2006, 22:28

Hi Mate Ive Got Same Problem With Cid 37,tried Unlock With Se Tool 3 Now Phone Dead,ive Tried Recovery & Flashing With Cid 36 K600 Files With No Luck,i Cant Find Any Cid 37 Files On Support,come On Someone With Knowledge & Help Please With A Step By Step Guide. Ps Ive Used Usb Smart In The Past So Pretty New To Se Tool, I Have Tried Search On This Forum With No Luck. Thanks In Advance Browse13

luzer · 12-08-2006, 04:25

Post the log .........

hackerbd · 12-08-2006, 07:09

K 608i easy unlock with usb smart.Don't worry brother its not big problem
Just full flash it.Its will be alive again.

BROWSE13 · 12-08-2006, 23:42

HI GUYS THIS IS THE LOG FILE IM GETTING WHEN USING SE TOOL BOX 3 TO FLASH K608I CID 37 WITH K600 CID 36 CAN ANYONE HELP PLEASE,

GUI v0.91380043/UNI
Loaded 51 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:37
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:37 PAF:1 IMEI:35684100080162 CERT:RED
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:37
Speed:460800
OTP LOCKED:1 CID:37 PAF:1 IMEI:35684100080162 CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
writing C:\Documents and Settings\adrian\My Documents\K600 CID 36 CRY RJ\K600_MAIN_R2J005_EU_EMEA_CID36.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:330
Will flash 330 blocks...
SSW loading returns:0
writing C:\Documents and Settings\adrian\My Documents\K600 CID 36 CRY RJ\K600_FS_R2J005_EU2_CID36.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:118
Will flash 118 blocks...
SSW loading returns:0
CSloader version:
050430 1711 MATCXC125904_SEMC_FILE_SYSTEM_LOADER_1_R4B
loader startup: executed
csloader refused to start fs services,error is:1
loader filesystem startup failed, that is fatal
Elapsed:799 secs.

ali_imran · 03-13-2015, 15:54

select setting in 4 5 and 9 now select file and selct cid49 flash with setool
after flash if set not on then unlock only and enjoy

moshman · 03-14-2015, 15:26

Quote:

Originally Posted by ali_imran

select setting in 4 5 and 9 now select file and selct cid49 flash with setool
after flash if set not on then unlock only and enjoy

Are you completely mad? 9 years ago this was posted !!!!!!!!!!!!!!!!!!!!!!!!!!!!

12-06-2006, 15:29	#1 (permalink)
icedragon69 Freak Poster Join Date: May 2006 Posts: 151 Member: 274206 Status: Offline Thanks Meter: 0	K608i Dead after unlock. Need to flash I tried unlocking a SE K608i with my new SETool Box 3. Unlock said it was done but now the phone will not turn on. I have tried to flash it but I have never used the SEtool before so I don’t no if I am doing it right but it says complete but still does not turn on.

12-07-2006, 22:28	#7 (permalink)
BROWSE13 Junior Member Join Date: Apr 2004 Age: 58 Posts: 39 Member: 62147 Status: Offline Thanks Meter: 0	K608i Dead Hi Mate Ive Got Same Problem With Cid 37,tried Unlock With Se Tool 3 Now Phone Dead,ive Tried Recovery & Flashing With Cid 36 K600 Files With No Luck,i Cant Find Any Cid 37 Files On Support,come On Someone With Knowledge & Help Please With A Step By Step Guide. Ps Ive Used Usb Smart In The Past So Pretty New To Se Tool, I Have Tried Search On This Forum With No Luck. Thanks In Advance Browse13

12-08-2006, 23:42	#10 (permalink)
BROWSE13 Junior Member Join Date: Apr 2004 Age: 58 Posts: 39 Member: 62147 Status: Offline Thanks Meter: 0	K608i Dead HI GUYS THIS IS THE LOG FILE IM GETTING WHEN USING SE TOOL BOX 3 TO FLASH K608I CID 37 WITH K600 CID 36 CAN ANYONE HELP PLEASE, GUI v0.91380043/UNI Loaded 51 flash descriptors Open COM port OK ChipID:7100,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:37 Speed:921600 DB2000 only supports 460800,fallback. OTP LOCKED:1 CID:37 PAF:1 IMEI:35684100080162 CERT:RED Open COM port OK ChipID:7100,EMP protocol:0301 PHONE IS BROWN FLASH CID detected:37 Speed:460800 OTP LOCKED:1 CID:37 PAF:1 IMEI:35684100080162 CERT:BROWN Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z Flash ID check:890D Flash props sent ok Switching to USB... Phone stays at current interface. writing C:\Documents and Settings\adrian\My Documents\K600 CID 36 CRY RJ\K600_MAIN_R2J005_EU_EMEA_CID36.cry CURRENT FLASH FILE CID:254 SSW uses dynamic hash, dynamic hash len is:330 Will flash 330 blocks... SSW loading returns:0 writing C:\Documents and Settings\adrian\My Documents\K600 CID 36 CRY RJ\K600_FS_R2J005_EU2_CID36.cry CURRENT FLASH FILE CID:254 SSW uses dynamic hash, dynamic hash len is:118 Will flash 118 blocks... SSW loading returns:0 CSloader version: 050430 1711 MATCXC125904_SEMC_FILE_SYSTEM_LOADER_1_R4B loader startup: executed csloader refused to start fs services,error is:1 loader filesystem startup failed, that is fatal Elapsed:799 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K608i Dead after Unlock	..::Mr999::..	SonyEricsson (USB-Smart)	4	08-07-2006 17:35
SE K608i dead after unlock	Naseerjako	MT-BOX	7	05-17-2006 15:44
k608i dead after unlock without tp	basim	Sony Ericsson	5	03-24-2006 15:44
k608i dead after unlock	SIXTUS	Sony Ericsson	2	11-30-2005 07:47
k608i dead after unlocking & cid changing	adam92se	Sony Ericsson	2	11-27-2005 17:05

12-06-2006, 20:37	#2 (permalink)
Jeffyoh88 Freak Poster Join Date: Jul 2006 Posts: 194 Member: 320354 Status: Offline Thanks Meter: 48	icedragon69 u try use crusier flash this phone... step below here... 1 connect phone 2 unlock rsa 3 direct unlock 4 flash arm 5 flash fs 6 customine 7 complete ... good luck man

12-06-2006, 21:06	#4 (permalink)
James-R No Life Poster Join Date: Jan 2005 Age: 50 Posts: 1,678 Member: 104911 Status: Offline Thanks Meter: 42	k608i is cid37, the answer is easy, but he should to search. br

12-06-2006, 21:34	#5 (permalink)
Irfangk786 No Life Poster Join Date: May 2005 Age: 44 Posts: 927 Member: 146630 Status: Offline Thanks Meter: 21	yes Kashif is right brother first of all click "identfy"and see what is the cid? to unlock cid 36 direct unlock ,for cid37 in setting check "revert to red"option.and for cid u mest have :rest: files in rest folder of setool.to download rest files go to support aria of setool.always use latest virsion of software.and for complete help plz send log.

12-07-2006, 09:40	#6 (permalink)
icedragon69 Freak Poster Join Date: May 2006 Posts: 151 Member: 274206 Status: Offline Thanks Meter: 0	i have tried and near the end it says phone detached and stops. it is cid37

12-08-2006, 04:25	#8 (permalink)
luzer No Life Poster Join Date: Nov 2003 Location: GT Posts: 2,802 Member: 44659 Status: Offline Thanks Meter: 363	Post the log .........

12-08-2006, 07:09	#9 (permalink)
hackerbd No Life Poster Join Date: Mar 2006 Location: Bangladesh Posts: 1,196 Member: 247758 Status: Offline Sonork: 100.1574842 Thanks Meter: 259	K 608i easy unlock with usb smart.Don't worry brother its not big problem Just full flash it.Its will be alive again.

03-13-2015, 15:54	#11 (permalink)
ali_imran No Life Poster Join Date: Apr 2007 Location: India Posts: 1,998 Member: 481609 Status: Offline Sonork: 100.1659889 Thanks Meter: 367	select setting in 4 5 and 9 now select file and selct cid49 flash with setool after flash if set not on then unlock only and enjoy