k608i HELP -tried to unlock now only red light flashing - GSM-Forum

atmot · 04-15-2006, 18:05

Used setool2, k608i, presssed unlock/repair says that its unlocked but now only red light flashing when i press power... what do i do????

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
Open COM port OK
Elapsed:12 secs.
Open COM port OK
Elapsed:7 secs.
RECOVERY MODE STARTED
Open COM port OK
Elapsed:83 secs.
Open COM port OK
Elapsed:9 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:37
Speed:115200
OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Setting up gdfs...
Clearing total time...
Writing simlocks...
Signing...
control keys complete.
full sig complete.
Unlock Done
Elapsed:15 secs.

this is my first time - so anyone that can help me step by step would be greatly appreciated ..
thanks in advance for anyone willing to share their knowledge..

fonecellar · 04-15-2006, 18:37

Quote:

Originally Posted by atmot

Used setool2, k608i, presssed unlock/repair says that its unlocked but now only red light flashing when i press power... what do i do????

this is my first time - so anyone that can help me step by step would be greatly appreciated ..
thanks in advance for anyone willing to share their knowledge..

reattach and change fone colour back to red

atmot · 04-15-2006, 18:56

you mean "CID change" to red37?
then press unlock again?
excuse my ignorance,, 1st timer

GOLAM · 04-15-2006, 19:00

if you have a usb-smart just do the unlock process again. it will be ok.
priviously i faced the same problem with setools and fixed with usb-smart. you do not need to flash. just unlock process with another tools.

leroi · 04-15-2006, 19:16

hello man
u have the best tool to resolve your problem
fist select in cid tab select brown 37
and press flash flash , please in seting tab do not select complete phone
if no work select red 37 and press flash .

try and reply there

GOLAM · 04-15-2006, 19:22

check here u can find semc tools
http://www.unlockeasy.com/modules.ph...C%20Tool%203.3

atmot · 04-15-2006, 19:24

GUI v0.91373/UNI
standalone version engaged.
Card serial:00001283
Loaded 49 flash descriptors
Open COM port OK
Elapsed:12 secs.
Open COM port OK
Elapsed:7 secs.
RECOVERY MODE STARTED
Open COM port OK
Elapsed:83 secs.
Open COM port OK
Elapsed:9 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:37
Speed:115200
OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Setting up gdfs...
Clearing total time...
Writing simlocks...
Signing...
control keys complete.
full sig complete.
Unlock Done
Elapsed:15 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:37
Speed:115200
OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
Flashing MAIN firmware:C:\2\z1010\DEL_125432_041108_1443_R1K010{ 0102020101}.out
can't open file "C:\2\z1010\DEL_125432_041108_1443_R1K010{01020201 01}.out"
Elapsed:17 secs.

leroi · 04-15-2006, 19:27

if this is no work go there please

http://www.************.com/forum/sh...ad.php?t=24977

do this first please before what i post before
best wishes
leroi

fonecellar · 04-15-2006, 19:31

Quote:

Originally Posted by atmot

you mean "CID change" to red37?
then press unlock again?
excuse my ignorance,, 1st timer

yes @atmot all you have to do is cid change to red . should be simpl as that if you show red light, all k 608i MUST be return to red

leroi · 04-15-2006, 19:45

please this mean that you want to write z1010 flash file on your phone man

there must not be flash file on main et fs tab man

this is why you must
press first

"clean file in main tab

************************************************** *******

now restart soft
go in setting tab

1- select in setting check "convert to red"
then unlock
and your problem will be resolve

do this please an post here
leroi
and you can contact me in my yahoo messenger
my iden is
[email protected]
leroi
best wishes

leroi · 04-15-2006, 19:53

@atmot

i'm waitting for u man
leroi

atmot · 04-15-2006, 20:21

thank you heaps guys... problem fixed.... really appreciate you time and help......

leroi · 04-15-2006, 20:21

i'm very happy to see that your problem is resolved

if you want to debrand your phone you must
go in support of your dongle page i mean www.s.....org
and dowload k600 flash files same as K608, but the problem is there are not flash file with cid 37
u must first change cid and flash
1- main + fs
2- complete checking of setting tab
3- press flash

but i thing u have not more experience for doing this kind of operation perhaps if you take time to read and understand faq on support forum

best regard
leroi

1-

fonecellar · 04-15-2006, 20:59

its ok i have PM with @atmot and explained it will be a problem for him as a newbie to debrand and his fone now all 100%

04-15-2006, 18:05	#1 (permalink)
atmot Junior Member Join Date: Apr 2006 Posts: 18 Member: 260822 Status: Offline Thanks Meter: 1	k608i HELP -tried to unlock now only red light flashing Used setool2, k608i, presssed unlock/repair says that its unlocked but now only red light flashing when i press power... what do i do???? GUI v0.91373/UNI standalone version engaged. Card serial:00001283 Loaded 49 flash descriptors Open COM port OK Elapsed:12 secs. Open COM port OK Elapsed:7 secs. RECOVERY MODE STARTED Open COM port OK Elapsed:83 secs. Open COM port OK Elapsed:9 secs. Open COM port OK ChipID:7100,EMP protocol:0301 PHONE IS BROWN FLASH CID detected:37 Speed:115200 OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z Flash ID check:890D Flash props sent ok Setting up gdfs... Clearing total time... Writing simlocks... Signing... control keys complete. full sig complete. Unlock Done Elapsed:15 secs. this is my first time - so anyone that can help me step by step would be greatly appreciated .. thanks in advance for anyone willing to share their knowledge..

04-15-2006, 19:24	#7 (permalink)
atmot Junior Member Join Date: Apr 2006 Posts: 18 Member: 260822 Status: Offline Thanks Meter: 1	hi leroi GUI v0.91373/UNI standalone version engaged. Card serial:00001283 Loaded 49 flash descriptors Open COM port OK Elapsed:12 secs. Open COM port OK Elapsed:7 secs. RECOVERY MODE STARTED Open COM port OK Elapsed:83 secs. Open COM port OK Elapsed:9 secs. Open COM port OK ChipID:7100,EMP protocol:0301 PHONE IS BROWN FLASH CID detected:37 Speed:115200 OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z Flash ID check:890D Flash props sent ok Setting up gdfs... Clearing total time... Writing simlocks... Signing... control keys complete. full sig complete. Unlock Done Elapsed:15 secs. Open COM port OK ChipID:7100,EMP protocol:0301 PHONE IS BROWN FLASH CID detected:37 Speed:115200 OTP status:0 locked:1 CID:37 PAF:1 IMEI:35684100002695 CERT:BROWN Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z Flash ID check:890D Flash props sent ok Switching to USB... Phone stays at current interface. Flashing MAIN firmware:C:\2\z1010\DEL_125432_041108_1443_R1K010{ 0102020101}.out can't open file "C:\2\z1010\DEL_125432_041108_1443_R1K010{01020201 01}.out" Elapsed:17 secs.

04-15-2006, 20:21	#12 (permalink)
atmot Junior Member Join Date: Apr 2006 Posts: 18 Member: 260822 Status: Offline Thanks Meter: 1	thank you all.... phone is unlocked now thank you heaps guys... problem fixed.... really appreciate you time and help......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 5500 sport tried to unlock now says phone start up failed	Hard Stone	Universalbox	2	11-17-2008 15:54
B100m tried to unlock-now reboot- help me	zonetrichur	UST Pro II	1	09-12-2008 13:59
help my K608i dead, trying to unlock.. please.	ticksjarub	Cruiser Suite	4	06-16-2008 11:32
hi help trying to unlock wiza200 could some one please help	smart phones	HTC & PDA WM( With Touchscreen)	1	02-15-2007 22:27
C261 After trying to unlock now Blinking screen	kasamiko	Infinity-Box	1	12-29-2006 12:13

04-15-2006, 18:56	#3 (permalink)
atmot Junior Member Join Date: Apr 2006 Posts: 18 Member: 260822 Status: Offline Thanks Meter: 1	you mean "CID change" to red37? then press unlock again? excuse my ignorance,, 1st timer

04-15-2006, 19:00	#4 (permalink)
GOLAM Freak Poster Join Date: Jan 2006 Location: Sweden Posts: 225 Member: 223778 Status: Offline Thanks Meter: 6	if you have a usb-smart just do the unlock process again. it will be ok. priviously i faced the same problem with setools and fixed with usb-smart. you do not need to flash. just unlock process with another tools.

04-15-2006, 19:16	#5 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	hello man u have the best tool to resolve your problem fist select in cid tab select brown 37 and press flash flash , please in seting tab do not select complete phone if no work select red 37 and press flash . try and reply there

04-15-2006, 19:22	#6 (permalink)
GOLAM Freak Poster Join Date: Jan 2006 Location: Sweden Posts: 225 Member: 223778 Status: Offline Thanks Meter: 6	check here u can find semc tools http://www.unlockeasy.com/modules.ph...C%20Tool%203.3

04-15-2006, 19:27	#8 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	if this is no work go there please http://www.************.com/forum/sh...ad.php?t=24977 do this first please before what i post before best wishes leroi

04-15-2006, 19:45	#10 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	please this mean that you want to write z1010 flash file on your phone man there must not be flash file on main et fs tab man this is why you must press first "clean file in main tab ************************************************ ***** now restart soft go in setting tab 1- select in setting check "convert to red" then unlock and your problem will be resolve do this please an post here leroi and you can contact me in my yahoo messenger my iden is [email protected] leroi best wishes

04-15-2006, 19:53	#11 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	@atmot i'm waitting for u man leroi

04-15-2006, 20:21	#13 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	i'm very happy to see that your problem is resolved if you want to debrand your phone you must go in support of your dongle page i mean www.s.....org and dowload k600 flash files same as K608, but the problem is there are not flash file with cid 37 u must first change cid and flash 1- main + fs 2- complete checking of setting tab 3- press flash but i thing u have not more experience for doing this kind of operation perhaps if you take time to read and understand faq on support forum best regard leroi 1-

04-15-2006, 20:59	#14 (permalink)
fonecellar No Life Poster Join Date: Jul 2004 Location: 127.0.0.1 Age: 79 Posts: 7,553 Member: 545165 Status: Offline Thanks Meter: 578	its ok i have PM with @atmot and explained it will be a problem for him as a newbie to debrand and his fone now all 100%