K610 red blink..........Not detect. - GSM-Forum

/FAISAL/ · 11-27-2008, 09:33

I recieve k610 in red blink.....I try to connect with setool software but it not detect by software.I clean jack but not detect on both interface (USB & Com).I change the jack but my probelem not solved.How i solve this plz guide me.
Thanks.

dmaetrey · 11-27-2008, 09:36

do the TP sw repair on that!!!

blinet · 11-27-2008, 09:37

if phone cant connect with USB (C, 2+5) and COM,
try revert 3Voltage on PCB battery conntact for few second and try connect again with setool

but setool can repair only flash cid49 red blinking without TP, for bigger flash cid use cruiser ultimate unlocker and logs.........or use TP

oMeR_Rasheed · 11-27-2008, 09:41

It's not detacted c button it's detacted on 2+5 bitton and thenattch the cable and do jo
and red bilinking it's gdfs crupteted open the phon and see the tp and reapir gdfs all is ok
b.r
shrry mobiles

venuno · 11-27-2008, 09:43

if usb can use for flashing
go to settings left side below
click usb then install driver if needed
indintify

xerraco · 11-27-2008, 09:50

If phone cannot be detected by SW then it cannot be Repair.

/FAISAL/ · 11-27-2008, 09:57

Quote:

if phone cant connect with USB (C, 2+5) and COM,
try revert 3Voltage on PCB battery conntact for few second and try connect again with setool

I do the same and my probelem is solved Thanks.

blinet · 11-27-2008, 09:58

no problem mate

br blinet

Quote:

Originally Posted by /FAISAL/

I do the same and my probelem is solved Thanks.

khorkokkeong · 02-15-2009, 08:47

u chage the flash ic first!

hbousrhira · 02-16-2009, 02:32

u need cable rg45 setool not usb dcu60 ...is good

hbousrhira · 02-16-2009, 02:34

with just signed mode ist ok

playboy123 · 02-16-2009, 02:54

just invert battery connectors for 3-5 seconds and try again

russell_07 · 02-16-2009, 03:26

try to used UB box bro..sometimes setool can't detect K610 red blink..

post result!

kultra · 08-29-2009, 10:53

Quote:

Originally Posted by playboy123

just invert battery connectors for 3-5 seconds and try again

good solution work !!

Frogy DJ · 02-17-2010, 10:50

Quote:

Originally Posted by playboy123

just invert battery connectors for 3-5 seconds and try again

what you mean with that, invert battery connector?

11-27-2008, 09:33	#1 (permalink)
/FAISAL/ No Life Poster Join Date: May 2008 Location: ...::::GUJRAT::::... Posts: 618 Member: 781860 Status: Offline Thanks Meter: 203	K610 red blink..........Not detect. I recieve k610 in red blink.....I try to connect with setool software but it not detect by software.I clean jack but not detect on both interface (USB & Com).I change the jack but my probelem not solved.How i solve this plz guide me. Thanks.

11-27-2008, 09:37	#3 (permalink)
blinet No Life Poster Join Date: Nov 2002 Location: Slovakia Age: 40 Posts: 1,060 Member: 17405 Status: Offline Thanks Meter: 345	if phone cant connect with USB (C, 2+5) and COM, try revert 3Voltage on PCB battery conntact for few second and try connect again with setool but setool can repair only flash cid49 red blinking without TP, for bigger flash cid use cruiser ultimate unlocker and logs.........or use TP Last edited by blinet; 11-27-2008 at 09:42.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
C905 red blinking not detecting or Identifying please help.	NawabN Sahoo	SETool2	7	03-16-2010 04:56
k610 red blinking.	uncell	SETool2	5	04-30-2009 22:24
K610 Red Blinking no connection with cruiser	relaxer	Cruiser Suite	16	12-04-2008 23:27
k610 red blink	glasgowsun	Cruiser Suite	9	10-26-2007 13:12
k610 red blinking	damir gsm	MT-BOX	8	03-02-2007 17:11

11-27-2008, 09:36	#2 (permalink)
dmaetrey No Life Poster Join Date: Jul 2006 Posts: 1,138 Member: 315550 Status: Offline Thanks Meter: 110	do the TP sw repair on that!!!

11-27-2008, 09:41	#4 (permalink)
oMeR_Rasheed No Life Poster Join Date: Mar 2007 Location: Islamic Republic Age: 36 Posts: 1,857 Member: 466635 Status: Offline Sonork: 100.1614186 Thanks Meter: 482	It's not detacted c button it's detacted on 2+5 bitton and thenattch the cable and do jo and red bilinking it's gdfs crupteted open the phon and see the tp and reapir gdfs all is ok b.r shrry mobiles

11-27-2008, 09:43	#5 (permalink)
venuno No Life Poster Join Date: Jun 2007 Location: Talk to * and He Will Listen Posts: 3,820 Member: 532761 Status: Offline** Sonork: 100-1592994 Thanks Meter: 1,104	if usb can use for flashing go to settings left side below click usb then install driver if needed indintify

11-27-2008, 09:50	#6 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,705 Member: 890926 Status: Offline Thanks Meter: 2,055	If phone cannot be detected by SW then it cannot be Repair.

02-15-2009, 08:47	#9 (permalink)
khorkokkeong Junior Member Join Date: Apr 2006 Posts: 35 Member: 267690 Status: Offline Thanks Meter: 4	u chage the flash ic first!

02-16-2009, 02:32	#10 (permalink)
hbousrhira Insane Poster Join Date: Jun 2005 Age: 55 Posts: 97 Member: 152096 Status: Offline Thanks Meter: 14	u need cable rg45 setool not usb dcu60 ...is good

02-16-2009, 02:34	#11 (permalink)
hbousrhira Insane Poster Join Date: Jun 2005 Age: 55 Posts: 97 Member: 152096 Status: Offline Thanks Meter: 14	with just signed mode ist ok

02-16-2009, 02:54	#12 (permalink)
playboy123 Freak Poster Join Date: Jan 2005 Age: 39 Posts: 142 Member: 109133 Status: Offline Thanks Meter: 12	just invert battery connectors for 3-5 seconds and try again

02-16-2009, 03:26	#13 (permalink)
russell_07 Insane Poster Join Date: May 2008 Posts: 67 Member: 764534 Status: Offline Thanks Meter: 3	try to used UB box bro..sometimes setool can't detect K610 red blink.. post result!