K800 red blinking - GSM-Forum

sniper007 · 03-04-2009, 14:01

hi every one. i got a K800 phone which was dead. i tried to flash the phone but it was giving me following message:

2/19/2009 6:17:48 PM v0.915021/UNI
2/19/2009 6:17:48 PM CARD SERIAL: 00086217
2/19/2009 6:17:48 PM Loaded 51 flash descriptors
2/19/2009 6:18:24 PM ChipID:9900,EMP protocol:0301
2/19/2009 6:18:24 PM BOOTROM MODE DETECTED
2/19/2009 6:18:24 PM Speed:921600
2/19/2009 6:18:24 PM Flash ID check:897E
2/19/2009 6:18:24 PM Flash props sent ok
2/19/2009 6:18:24 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxxxxxxxx CERT:N/A
2/19/2009 6:18:24 PM FLASH CID:53 COLOR:RED
2/19/2009 6:19:30 PM setGDFS_params failed
2/19/2009 6:19:30 PM failed to setup GDFS
2/19/2009 6:19:30 PM Elapsed: 95 secs.
2/19/2009 6:21:07 PM SIGNED MODE (USING SERVER).
2/19/2009 6:25:31 PM FAILED TO SETUP PHONE
2/19/2009 6:25:31 PM PROCEDURE WAS STOPPED BY USER
2/19/2009 6:25:31 PM Elapsed: 263 secs.

but know i am even not able to identify the phone, i tried both usb and com cables but no result.
the battery is fully charged.
the phone is not water damaged

i know it can be fixed with testpoint but the problem is that the phone is not communicating with software

Miftah_Lutfi · 03-04-2009, 14:06

2/19/2009 6:17:48 PM v0.915021/UNI
2/19/2009 6:17:48 PM CARD SERIAL: 00086217
2/19/2009 6:17:48 PM Loaded 51 flash descriptors
2/19/2009 6:18:24 PM ChipID:9900,EMP protocol:0301
2/19/2009 6:18:24 PM BOOTROM MODE DETECTED
2/19/2009 6:18:24 PM Speed:921600
2/19/2009 6:18:24 PM Flash ID check:897E
2/19/2009 6:18:24 PM Flash props sent ok
2/19/2009 6:18:24 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxxxxxxxx CERT:N/A
2/19/2009 6:18:24 PM FLASH CID:53 COLOR:RED
2/19/2009 6:19:30 PM setGDFS_params failed
2/19/2009 6:19:30 PM failed to setup GDFS
2/19/2009 6:19:30 PM Elapsed: 95 secs.
2/19/2009 6:21:07 PM SIGNED MODE (USING SERVER).
2/19/2009 6:25:31 PM FAILED TO SETUP PHONE
2/19/2009 6:25:31 PM PROCEDURE WAS STOPPED BY USER
2/19/2009 6:25:31 PM Elapsed: 263 secs.

you need to repair gdfs via TP..,

br..,

sniper007 · 03-04-2009, 14:36

yeah thats right. but as i said the phone is not connecting to the computer (no communication with the software)

v0.915034/UNI
CARD SERIAL: 00086217
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK

but nothing after that, i press the power on, remove battery, cable but no response, only red blinking in infrared

sniper007 · 03-04-2009, 14:40

yeah thats right. but as i said the phone is not connecting to the computer (no communication with the software)

v0.915034/UNI
CARD SERIAL: 00086217
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK

but nothing after that, i press the power on, remove battery, cable but no response, only red blinking in infrared

Mohsin-* · 03-04-2009, 15:48

Quote:

Originally Posted by sniper007

hi every one. i got a K800 phone which was dead. i tried to flash the phone but it was giving me following message:

2/19/2009 6:17:48 PM v0.915021/UNI
2/19/2009 6:17:48 PM CARD SERIAL: 00086217
2/19/2009 6:17:48 PM Loaded 51 flash descriptors
2/19/2009 6:18:24 PM ChipID:9900,EMP protocol:0301
2/19/2009 6:18:24 PM BOOTROM MODE DETECTED
2/19/2009 6:18:24 PM Speed:921600
2/19/2009 6:18:24 PM Flash ID check:897E
2/19/2009 6:18:24 PM Flash props sent ok
2/19/2009 6:18:24 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxxxxxxxx CERT:N/A
2/19/2009 6:18:24 PM FLASH CID:53 COLOR:RED
2/19/2009 6:19:30 PM setGDFS_params failed
2/19/2009 6:19:30 PM failed to setup GDFS
2/19/2009 6:19:30 PM Elapsed: 95 secs.
2/19/2009 6:21:07 PM SIGNED MODE (USING SERVER).
2/19/2009 6:25:31 PM FAILED TO SETUP PHONE
2/19/2009 6:25:31 PM PROCEDURE WAS STOPPED BY USER
2/19/2009 6:25:31 PM Elapsed: 263 secs.

but know i am even not able to identify the phone, i tried both usb and com cables but no result.
the battery is fully charged.
the phone is not water damaged

i know it can be fixed with testpoint but the problem is that the phone is not communicating with software

that mean ur gdfs area is corrupted

in this post ur mobile connected with soft after this not connect check connector+cable+hardware
BR

sniper007 · 03-04-2009, 16:19

Quote:

Originally Posted by mohsin-*

that mean ur gdfs area is corrupted

in this post ur mobile connected with soft after this not connect check connector+cable+hardware
BR

the cable is working fine as i unlocked/flashed 3 phone with the same cable today. connector is also ok as it blinks red when i connect com cable. hardware i am not sure, what i need to check on hardware, but it was giving me above logs so dont think that it is hardware.

Mohsin-* · 03-04-2009, 16:33

whats result on com cable can u check on com cable

sniper007 · 03-04-2009, 17:42

YAH AS MENTIONED ABOVE.

v0.915034/UNI
CARD SERIAL: 00086217
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK

AND AFTER THIS IT SAYS THE PRESS POWER BUTTONS SHORTLY AND DONT GO FURTHER, I HAVE TRIED IT WITH REMOVING THE BATTERY AND PUTTING IT BACK PLUG/UNPLUG CABLE BUT NO COMMUNICATION WITH THE PHONE AT ALL

raezak · 03-04-2009, 17:45

use com cable .. short the clock battery atleast 3 to 5 secs then post the results sir

br

sniper007 · 03-04-2009, 18:30

can u tell me plz how to short eh clock battery

Hamid Ejaz · 03-04-2009, 19:37

OTP CID: 51
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Could not start GDFS service
any solution on cruiser

Hamid Ejaz · 03-04-2009, 19:47

k800i red led blinking
on flash
full flash ok but when i customize it
there is problem gdfs could not start
any solution

sniper007 · 03-04-2009, 20:05

Quote:

Originally Posted by raezak

use com cable .. short the clock battery atleast 3 to 5 secs then post the results sir

br

SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
loader refused shutdown, remove and insert battery !
PROCEDURE WAS STOPPED BY USER
Elapsed: 27 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 60 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 27 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 22 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 114 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 60 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
subblock 001 NAK, [44050000/00010000]
Elapsed: 7 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER, TP #1 INCORRECT
Elapsed: 155 secs.

SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
loader refused shutdown, remove and insert battery !
PROCEDURE WAS STOPPED BY USER
Elapsed: 27 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 60 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 27 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 22 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 114 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 60 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
subblock 001 NAK, [44050000/00010000]
Elapsed: 7 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
NOT EXPECTED ANSWER, TP #1 INCORRECT
Elapsed: 155 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 45 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
subblock 00E NAK, [44070000/0000FFF0]
PROCEDURE WAS STOPPED BY USER
Elapsed: 26 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 43 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 20 secs.
SIGNED MODE (USING SERVER).
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 23 secs.
SIGNED MODE (USING SERVER).
Processing script "C:\Documents and Settings\abc\Desktop\Read_Security_Units.txt"...
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
GDFS startup failed (1D)
loader GDFS startup failed, that is fatal
Elapsed: 13 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 56 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 26 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 37 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 INCORRECT
Elapsed: 21 secs.
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
DONE
Elapsed: 38 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 199 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 55 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 328 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 215 secs.
TESTPOINT REPAIR STAGE #2 STARTED
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Trying to launch embedded bootloader...
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 172 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
phone CID not supported in that mode
Elapsed: 1 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35612802000633 CERT:N/A
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
Flash ID check:897E
Flash props sent ok
writing D:\Softwears\1 unlocking drivers backup\setool V41\v0.915016\gdfs_in_ssw_format\db2020\K800_GDFS_ SSW.ssw
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is:640
HDR block not accepted,error: 19
Elapsed: 16 secs.

yarra · 03-04-2009, 21:40

can post here ic flash picture coz one off this ic conn't take testpoint

mehdi1978 · 03-05-2009, 10:01

dear sniper u must use dreambox for repair gdfs in advance mode for solving your problem.good luck.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K800 red blink (cannot detected)	llcoolr	Sony Ericsson	49	01-16-2011 21:44
K800 red blink..DONE with SETOOL...	rico_deep	SETool2	2	11-17-2010 15:48
K800 red blink after unlock with code - can UB fix?	James_S	Universalbox	10	12-14-2007 10:01
K800 red blinking problem	stk_	MT-BOX	1	11-23-2007 17:08
K800 Red Blink	alamgarh	Cruiser Suite	2	11-19-2007 08:07

03-04-2009, 14:36	#3 (permalink)
sniper007 No Life Poster Join Date: Mar 2008 Location: London Posts: 1,307 Member: 722656 Status: Offline Sonork: 100.1584918 Thanks Meter: 294	yeah thats right. but as i said the phone is not connecting to the computer (no communication with the software) v0.915034/UNI CARD SERIAL: 00086217 Loaded 51 flash descriptors TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK but nothing after that, i press the power on, remove battery, cable but no response, only red blinking in infrared

03-04-2009, 14:40	#4 (permalink)
sniper007 No Life Poster Join Date: Mar 2008 Location: London Posts: 1,307 Member: 722656 Status: Offline Sonork: 100.1584918 Thanks Meter: 294	yeah thats right. but as i said the phone is not connecting to the computer (no communication with the software) v0.915034/UNI CARD SERIAL: 00086217 Loaded 51 flash descriptors TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK but nothing after that, i press the power on, remove battery, cable but no response, only red blinking in infrared

03-04-2009, 16:33	#7 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	whats result on com cable can u check on com cable

03-04-2009, 17:42	#8 (permalink)
sniper007 No Life Poster Join Date: Mar 2008 Location: London Posts: 1,307 Member: 722656 Status: Offline Sonork: 100.1584918 Thanks Meter: 294	YAH AS MENTIONED ABOVE. v0.915034/UNI CARD SERIAL: 00086217 Loaded 51 flash descriptors TESTPOINT REPAIR STAGE #1 STARTED Open COM port OK AND AFTER THIS IT SAYS THE PRESS POWER BUTTONS SHORTLY AND DONT GO FURTHER, I HAVE TRIED IT WITH REMOVING THE BATTERY AND PUTTING IT BACK PLUG/UNPLUG CABLE BUT NO COMMUNICATION WITH THE PHONE AT ALL

03-04-2009, 17:45	#9 (permalink)
raezak No Life Poster Join Date: Apr 2006 Location: Badong's Junkshop Posts: 2,749 Member: 260632 Status: Offline Thanks Meter: 639	use com cable .. short the clock battery atleast 3 to 5 secs then post the results sir br

03-04-2009, 18:30	#10 (permalink)
sniper007 No Life Poster Join Date: Mar 2008 Location: London Posts: 1,307 Member: 722656 Status: Offline Sonork: 100.1584918 Thanks Meter: 294	can u tell me plz how to short eh clock battery

03-04-2009, 19:37	#11 (permalink)
Hamid Ejaz Junior Member Join Date: May 2006 Posts: 31 Member: 278166 Status: Offline Thanks Meter: 4	OTP CID: 51 Phone CID: 52 Phone color: Red Sending applet... Applet ID: 061205 1523 HANCXC9876543210_DB2020... Sending applet... Applet ID: 061201 1314 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Customize File System --- ] Sending CS applet... Applet ID: 070410 1557 HANCXC1250562_DB2020_CS... Initializing CS applet... Applet ID: 070410 1557 HANCXC1250562_DB2020_CS... Baudrate = 921600Bd Starting up GDFS service... Could not start GDFS service any solution on cruiser

03-04-2009, 19:47	#12 (permalink)
Hamid Ejaz Junior Member Join Date: May 2006 Posts: 31 Member: 278166 Status: Offline Thanks Meter: 4	k800i red led blinking on flash full flash ok but when i customize it there is problem gdfs could not start any solution

03-04-2009, 21:40	#14 (permalink)
yarra Registered User Join Date: Apr 2007 Location: ==Syria== Age: 44 Posts: 1,339 Member: 493205 Status: Offline Sonork: 100.1581647 Thanks Meter: 526	can post here ic flash picture coz one off this ic conn't take testpoint

03-05-2009, 10:01	#15 (permalink)
mehdi1978 Insane Poster Join Date: Aug 2008 Location: IRAN Age: 40 Posts: 91 Member: 838770 Status: Offline Thanks Meter: 7	dear sniper u must use dreambox for repair gdfs in advance mode for solving your problem.good luck.