K800i CID 49 Dead - GSM-Forum

curtisbcm · 12-16-2010, 00:45

My k800 was converted to brown, when I try to unlock or flash it I keep getting this error message:

RUNNING v 1.09/UNI
CARD SERIAL 00153215
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:110010000000
RESET MODE STARTED
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA
FLASH ID: 2019
GOT SEED

87858B72180DB5D15D08963
P96 AUTH PASSED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
PHONE SUCCESSFULLY RESET TO DEVELOPER STATE
Elapsed: 21 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
file "" can't be found or opened
Elapsed: 0 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
FLASH ID: 2019
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 11 secs.
CFG:001000001000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 63 secs.
CFG:001000000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 33 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:111110000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
Setting up GDFS...
WRITING CLEAR SIMLOCK UNITS...
SIGNING...
Unlock DONE
Elapsed: 25 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:111110000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
FLASH ID: 2019
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 23 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:111110000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 29 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:111110000000
file "" can't be found or opened
Elapsed: 0 secs.
CFG:001000000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 45 secs.
CFG:001000001000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 123 secs.
CFG:001000001000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
FLASH ID: 2019
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 14 secs.
CFG:001000001000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
FLASH ID: 2019
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
can't get packet start.
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 11 secs.
SIGNED MODE (USING SERVER)
CFG:101100000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 60 secs.
SIGNED MODE (USING SERVER)
CFG:101100000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 97 secs.
SIGNED MODE (USING SERVER)
PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
CFG:101100000000
RESET MODE STARTED
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA
FLASH ID: 2019
GOT SEED:296F11AD2180DB5D15D08963
P96 AUTH PASSED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
PHONE SUCCESSFULLY RESET TO DEVELOPER STATE
Elapsed: 16 secs.
SIGNED MODE (USING SERVER)
CFG:101100000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 37 secs.

Now phone not turning on, Not detecting when I try to connect by holding the 'C' button.

How do I now repair and unlock this phone and getting it working?

Thank you.

huzsolt · 12-16-2010, 01:01

you need 2 files to write, generic and fs, and also check COMPLETE PHONE.

Rhyan777 · 12-16-2010, 02:01

Quote:

ACTIVE CID:49 COLOR:BROWN

FLASH GDFS@EROMS on EMPTY FILL TAB,,,,

Then FLASH MAIN@FS,,,w/SIGNMODE@CUSTOMIZED on SETTINGS,,,,

Br,.
Rhyan

smeera · 12-16-2010, 11:37

FLASH GDFS@EROMS on EMPTY FILL TAB,,,,

Then FLASH MAIN@FS,,,w/SIGNMODE@CUSTOMIZED on SETTINGS,,,,

same problem friend any other solution

RUNNING v 1.09/UNI
CARD SERIAL
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:101100100100
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 9 secs.
SIGNED MODE (USING SERVER)
CFG:101100100100
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 13 secs.
SIGNED MODE (USING SERVER)
CFG:101100100100
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 2 secs.
CFG:001100100100
ChipID:9900,EMP protocol:0301
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "E:\setools\setool3g\gdfs_in_ssw_format\db2020\K80 0_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
writing "E:\setools\setool3g\eroms\db2020\DB2020EROM_BROWN 49_BROWN_CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 80
Will flash 4 blocks...
writing "E:\setools\setool3g\se flash file\k800\cid49\r1cd001_CXC1250568_HUTCHISON_WI.ss w.cry"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 9100
HDR block not accepted,error: 19
Elapsed: 89 secs.
CFG:000000000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 9 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "E:\setools\setool3g\script\scripts.rar"
bad file, will not flash it.
Elapsed: 7 secs.
CFG:001100000100
ChipID:9900,EMP protocol:0301
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
Setting up GDFS...
IMEI MISMATCH !
ORIGINAL IMEI:35170701972208
CURRENT IMEI:35471601808414
WRITING CLEAR SIMLOCK UNITS...
SIMLOCK CODES SET TO "42285430"
SIGNING...
No situable FS loader found
Elapsed: 14 secs.
CFG:000000100100
ChipID:9900,EMP protocol:0301
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "E:\setools\setool3g\gdfs_in_ssw_format\db2020\K80 0_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
Searching...
INVALID SEARCH RESPONSE (0000005F)
Setting up GDFS...
WRITING OTP IMEI:35170701972208
write OTP fail,err:05
OTP WRITE FAILURE
WRITING CLEAR SIMLOCK UNITS...
SIMLOCK CODES SET TO "87622756"
SIGNING...
Elapsed: 64 secs.
CFG:000000100100
ChipID:9900,EMP protocol:0301
Speed:460800
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
Searching...
INVALID SEARCH RESPONSE (0000005F)
Setting up GDFS...
WRITING OTP IMEI:35170701972208
write OTP fail,err:05
OTP WRITE FAILURE
WRITING CLEAR SIMLOCK UNITS...
SIMLOCK CODES SET TO "34626766"
SIGNING...
Elapsed: 8 secs.

curtisbcm · 12-16-2010, 16:59

Quote:

Originally Posted by Rhyan777

,FLASH GDFS@EROMS on EMPTY FILL TAB,,,

Then FLASH MAIN@FS,,,w/SIGNMODE@CUSTOMIZED on SETTINGS,,,,

Br,.
Rhyan

How do I flash ---FLASH GDFS@EROMS on EMPTY FILL TAB,,,---- with se-tool?
Please be more detail. thanks.

vanilla-sky007 · 12-16-2010, 17:21

first step open setool box using usb cable not worked 100/100

using comport worked perfectly

1 goo EMPTY FILL repair TAB chose k800 chec signed mode on setting and press recovery your phone well be devlopad

2 add gdfs_in_ssw_format/db2020/K800_GDFS_SSW.ssw

3 add eroms/db2020/DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw

3 press flash olwes on EMPTY FILL repair no ned to chec singned mode on sitting

to be ok final flash your phone sam cid on erom cid52

curtisbcm · 12-16-2010, 17:54

Quote:

Originally Posted by vanilla-sky007

first step open setool box using usb cable not worked 100/100

using comport worked perfectly

1 goo EMPTY FILL repair TAB chose k800 chec signed mode on setting and press recovery your phone well be devlopad

2 add gdfs_in_ssw_format/db2020/K800_GDFS_SSW.ssw

3 add eroms/db2020/DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw

3 press flash olwes on EMPTY FILL repair no ned to chec singned mode on sitting

to be ok final flash your phone sam cid on erom cid52

RUNNING v 1.09/UNI
CARD SERIAL 00153215
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Church Of ***\Desktop\Se-Tool Unlock\v1.09\gdfs_in_ssw_format\db2020\K800_GDFS_S SW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
SIGNING...
Elapsed: 36 secs.

What next should I do?

Rhyan777 · 12-17-2010, 07:09

Quote:

What next should I do?

FLASH EROMS on EMPTY FILL TAB,,,(EROMS SHOULD BE EQUAL or HIGHER than OTP)

Then FLASH MAIN@FS on SE TAB,,w/SIGNMODE@CUSTOMIZED on SETTINGS...

Br,.
Rhyan

vlad33 · 12-17-2010, 08:38

you must use com port with rj 45 cable !!!

badgerjum · 02-13-2011, 19:37

Hi im new to the se tool3 box, and i wont to start by unlocking a k800i, but i need to know what boxes in the software need to be ticked, and is it the k750 cable i use, also what is the sequence i need to do to unlock it, is there a manual for v1.01 so i can do these phones with out to much troble, all help thanked as normal, thanks lads and lasses

12-16-2010, 00:45	#1 (permalink)
curtisbcm Registered User Join Date: Jun 2006 Location: Jamaica Posts: 1,026 Member: 292907 Status: Offline Sonork: None Thanks Meter: 51	K800i CID 49 Dead My k800 was converted to brown, when I try to unlock or flash it I keep getting this error message: RUNNING v 1.09/UNI CARD SERIAL 00153215 USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5") CFG:110010000000 RESET MODE STARTED ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA FLASH ID: 2019 GOT SEED87858B72180DB5D15D08963 P96 AUTH PASSED OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 PHONE SUCCESSFULLY RESET TO DEVELOPER STATE Elapsed: 21 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 file "" can't be found or opened Elapsed: 0 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 FLASH ID: 2019 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN no ack during gdfs_readvar ! SCRC READ FAILURE Elapsed: 11 secs. CFG:001000001000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of *\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 63 secs. CFG:001000000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 33 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:111110000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 Setting up GDFS... WRITING CLEAR SIMLOCK UNITS... SIGNING... Unlock DONE Elapsed: 25 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:111110000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 FLASH ID: 2019 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN no ack during gdfs_readvar ! SCRC READ FAILURE Elapsed: 23 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:111110000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 29 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:111110000000 file "" can't be found or opened Elapsed: 0 secs. CFG:001000000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 45 secs. CFG:001000001000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 123 secs. CFG:001000001000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 FLASH ID: 2019 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN no ack during gdfs_readvar ! SCRC READ FAILURE Elapsed: 14 secs. CFG:001000001000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 FLASH ID: 2019 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN can't get packet start. no ack during gdfs_readvar ! SCRC READ FAILURE Elapsed: 11 secs. SIGNED MODE (USING SERVER) CFG:101100000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 60 secs. SIGNED MODE (USING SERVER) CFG:101100000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of \Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 97 secs. SIGNED MODE (USING SERVER) PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5") CFG:101100000000 RESET MODE STARTED ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA FLASH ID: 2019 GOT SEED:296F11AD2180DB5D15D08963 P96 AUTH PASSED OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 PHONE SUCCESSFULLY RESET TO DEVELOPER STATE Elapsed: 16 secs. SIGNED MODE (USING SERVER) CFG:101100000000 ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:115200 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701407709 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "C:\Documents and Settings\Church Of *\Desktop\Se-Tool Unlock\k800 cid49\r1cb001_CXC1250210_GENERIC_WI.ssw.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 37 secs. Now phone not turning on, Not detecting when I try to connect by holding the 'C' button. How do I now repair and unlock this phone and getting it working? Thank you.

02-13-2011, 19:37	#10 (permalink)
badgerjum Freak Poster Join Date: May 2007 Location: east peckham, near tonbridge Posts: 372 Member: 505845 Status: Offline Thanks Meter: 21	Hi se tool team Hi im new to the se tool3 box, and i wont to start by unlocking a k800i, but i need to know what boxes in the software need to be ticked, and is it the k750 cable i use, also what is the sequence i need to do to unlock it, is there a manual for v1.01 so i can do these phones with out to much troble, all help thanked as normal, thanks lads and lasses

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repaired dead phone without backup	Prodigal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-29-2011 11:26
HELP Dead 5130 v5.00	N.Schmetz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	03-08-2011 04:51
help! Dead 5110 v5.30	aklishin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-04-2001 11:56
nokia 5110 dead	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-28-2001 11:59
6150 V5.20 WANTED --- DEAD OR ALIVE --- IT'S BETTER ALIVE ! ;)))	tcamilo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-19-1999 22:30

12-16-2010, 01:01	#2 (permalink)
huzsolt No Life Poster Join Date: Jul 2004 Location: YODAFON Posts: 1,522 Member: 75392 Status: Offline Sonork: 100.81199 Thanks Meter: 136	you need 2 files to write, generic and fs, and also check COMPLETE PHONE.

12-16-2010, 11:37	#4 (permalink)
smeera Insane Poster Join Date: Feb 2007 Posts: 65 Member: 444872 Status: Offline Thanks Meter: 1	FLASH GDFS@EROMS on EMPTY FILL TAB,,,, Then FLASH MAIN@FS,,,w/SIGNMODE@CUSTOMIZED on SETTINGS,,,, same problem friend any other solution RUNNING v 1.09/UNI CARD SERIAL USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) CFG:101100100100 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 9 secs. SIGNED MODE (USING SERVER) CFG:101100100100 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 13 secs. SIGNED MODE (USING SERVER) CFG:101100100100 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 2 secs. CFG:001100100100 ChipID:9900,EMP protocol:0301 Speed:460800 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "E:\setools\setool3g\gdfs_in_ssw_format\db2020\K80 0_GDFS_SSW.ssw" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 640 Will flash 32 blocks... writing "E:\setools\setool3g\eroms\db2020\DB2020EROM_BROWN 49_BROWN_CID49_DB2020.ssw" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 80 Will flash 4 blocks... writing "E:\setools\setool3g\se flash file\k800\cid49\r1cd001_CXC1250568_HUTCHISON_WI.ss w.cry" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 9100 HDR block not accepted,error: 19 Elapsed: 89 secs. CFG:000000000000 PROCEDURE WAS STOPPED BY USER FAILED TO SETUP PHONE Elapsed: 9 secs. CFG:000000000000 ChipID:9900,EMP protocol:0301 Speed:460800 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "E:\setools\setool3g\script\scripts.rar" bad file, will not flash it. Elapsed: 7 secs. CFG:001100000100 ChipID:9900,EMP protocol:0301 Speed:460800 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 Setting up GDFS... IMEI MISMATCH ! ORIGINAL IMEI:35170701972208 CURRENT IMEI:35471601808414 WRITING CLEAR SIMLOCK UNITS... SIMLOCK CODES SET TO "42285430" SIGNING... No situable FS loader found Elapsed: 14 secs. CFG:000000100100 ChipID:9900,EMP protocol:0301 Speed:460800 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 writing "E:\setools\setool3g\gdfs_in_ssw_format\db2020\K80 0_GDFS_SSW.ssw" CURRENT FLASH FILE CID:49 SSW uses full hash, hash len is: 640 Will flash 32 blocks... Searching... INVALID SEARCH RESPONSE (0000005F) Setting up GDFS... WRITING OTP IMEI:35170701972208 write OTP fail,err:05 OTP WRITE FAILURE WRITING CLEAR SIMLOCK UNITS... SIMLOCK CODES SET TO "87622756" SIGNING... Elapsed: 64 secs. CFG:000000100100 ChipID:9900,EMP protocol:0301 Speed:460800 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701972208 ACTIVE CID:49 COLOR:BROWN LDR:060721 1021 DB2020_SERVICE_LOADER FLASH ID: 2019 Searching... INVALID SEARCH RESPONSE (0000005F) Setting up GDFS... WRITING OTP IMEI:35170701972208 write OTP fail,err:05 OTP WRITE FAILURE WRITING CLEAR SIMLOCK UNITS... SIMLOCK CODES SET TO "34626766" SIGNING... Elapsed: 8 secs.

12-16-2010, 17:21	#6 (permalink)
vanilla-sky007 Freak Poster Join Date: Jun 2010 Location: morocco Posts: 182 Member: 1322811 Status: Offline Thanks Meter: 46	first step open setool box using usb cable not worked 100/100 using comport worked perfectly 1 goo EMPTY FILL repair TAB chose k800 chec signed mode on setting and press recovery your phone well be devlopad 2 add gdfs_in_ssw_format/db2020/K800_GDFS_SSW.ssw 3 add eroms/db2020/DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw 3 press flash olwes on EMPTY FILL repair no ned to chec singned mode on sitting to be ok final flash your phone sam cid on erom cid52

12-17-2010, 08:38	#9 (permalink)
vlad33 Freak Poster Join Date: Aug 2007 Location: Romania Age: 52 Posts: 190 Member: 563582 Status: Offline Thanks Meter: 42	you must use com port with rj 45 cable !!!