k800i flashing problem

[shsarfraz]

SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342701979818
ACTIVE CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID: 2019
writing "D:\mb\ALL FLASH FILE\Sonyericson\k800\cid-52\R1GB001_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9100
Will flash 455 blocks...
writing "D:\mb\ALL FLASH FILE\Sonyericson\k800\cid-52\R1GB001_FS_CENT_EUROPE_WI_RED_CID52.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 4500
Will flash 225 blocks...
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
GDFS startup failed,error is 04 [1D]
loader GDFS startup failed, that is fatal

[mobile mart]

Originally Posted by shsarfraz

SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342701979818
ACTIVE CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID: 2019
writing "D:\mb\ALL FLASH FILE\Sonyericson\k800\cid-52\R1GB001_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9100
Will flash 455 blocks...
writing "D:\mb\ALL FLASH FILE\Sonyericson\k800\cid-52\R1GB001_FS_CENT_EUROPE_WI_RED_CID52.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 4500
Will flash 225 blocks...
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
GDFS startup failed,error is 04 [1D]
loader GDFS startup failed, that is fatal

Gdfs damaged, you can repair it by "reset" procedure.

that is so-called reset procedure.

1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.

[shsarfraz]

Originally Posted by mobile mart

Gdfs damaged, you can repair it by "reset" procedure.

that is so-called reset procedure.

1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.

when i tried to write gdfs
http://forum.gsmhosting.com/vbb/f84/...s-file-588347/
its says
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342701979818
ACTIVE CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID: 2019
writing "C:\Documents and Settings\Administrator\Desktop\K800_GDFS.rar"
bad file, will not flash it.
Elapsed: 4 secs.

[GracekSE]

Unpack this file K800_GDFS.rar