GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > SETool2
Reload this Page LT18i unlock done by setool using testpoint
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 11-29-2011, 11:26   #1 (permalink)
Freak Poster
 
Join Date: Aug 2006
Location: Nord Romania
Age: 42
Posts: 224
Member: 323481
Status: Offline
Thanks Meter: 43
LT18i unlock done by setool using testpoint

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 64 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_LOADER VER "R4A069"
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"

PHONE IMEI : 35850604242826
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1256]
WRITING SEMCBOOT ...
Unlock DONE

Procedure:
1.
prepare for testpoint operation.
check testpoints location for your phone model in dist\docs\s1_qualcomm_uart_cables or use GPG cable set
open testpoints for access
if you do not have GPG cable set, get some needle with wire, connect it to phone gnd ( battery minus ) or to usb cable shield, etc.

2.
select proper phone model.
select COM as interface.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset, use testpoint (gnd type)
fill login/password and check if account valid.

press unlock

when prompted, execute steps in EXACT order:
  1. remove cable from phone,
  2. remove battery from phone,
  3. attach testpoint ( turn on switch on cable set )
  4. insert cable to phone, HOLDING TESTPOINT ( cable set switch in "on" position )
  5. press "ready"
  6. when prompted detach testpoint
  7. press "ready"
  8. install drivers from dist\drivers\USBFlash_driver\ ( if asked )
phone will be unlocked.
  Reply With Quote
The Following 3 Users Say Thank You to kosta25 For This Useful Post:
Show/Hide list of the thanked
Old 11-29-2011, 13:19   #2 (permalink)
No Life Poster
 
dilshad_noori's Avatar
 
Join Date: Apr 2010
Location: NICE MOBILES
Age: 35
Posts: 704
Member: 1293519
Status: Offline
Sonork: 100.1596500
Thanks Meter: 169
Quote:
Originally Posted by kosta25 View Post
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 64 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_LOADER VER "R4A069"
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"

PHONE IMEI : 35850604242826
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1256]
WRITING SEMCBOOT ...
Unlock DONE

Procedure:
1.
prepare for testpoint operation.
check testpoints location for your phone model in dist\docs\s1_qualcomm_uart_cables or use GPG cable set
open testpoints for access
if you do not have GPG cable set, get some needle with wire, connect it to phone gnd ( battery minus ) or to usb cable shield, etc.

2.
select proper phone model.
select COM as interface.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset, use testpoint (gnd type)
fill login/password and check if account valid.

press unlock

when prompted, execute steps in EXACT order:
  1. remove cable from phone,
  2. remove battery from phone,
  3. attach testpoint ( turn on switch on cable set )
  4. insert cable to phone, HOLDING TESTPOINT ( cable set switch in "on" position )
  5. press "ready"
  6. when prompted detach testpoint
  7. press "ready"
  8. install drivers from dist\drivers\USBFlash_driver\ ( if asked )
phone will be unlocked.
Good Info.....................
  Reply With Quote
Old 12-27-2011, 15:22   #3 (permalink)
Junior Member
 
Join Date: Jul 2011
Posts: 1
Member: 1612905
Status: Offline
Thanks Meter: 0
how to unlock without setol sony ericsson KT18i
  Reply With Quote
Old 07-28-2012, 15:19   #4 (permalink)
No Life Poster
 
Join Date: Jun 2005
Location: Lagos, Nigeria
Posts: 1,726
Member: 152547
Status: Offline
Sonork: 100.1586021
Thanks Meter: 143
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
llbug: write error: "The device does not recognize the command"
llbug: blk write fail.fatal
qcSendPacket: can't send packet.
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 64 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 180 secs.
  Reply With Quote
Old 07-28-2012, 18:07   #5 (permalink)
No Life Poster
 
koperta4512's Avatar
 
Join Date: Dec 2011
Location: Poland
Posts: 1,166
Member: 1704846
Status: Offline
Sonork: 1617108
Thanks Meter: 117
HOW TO WORK WITH SEMC PDA PHONES - Page 2
  Reply With Quote
The Following User Says Thank You to koperta4512 For This Useful Post:
Old 07-30-2012, 12:37   #6 (permalink)
Freak Poster
 
Join Date: Dec 2007
Posts: 245
Member: 643752
Status: Offline
Thanks Meter: 10
where can find s1_qualcomm_uart_cables or use GPG cable??i only have E20.X10.E16.E10 GPG cable,but not use in LT18i
  Reply With Quote
Old 07-30-2012, 18:17   #7 (permalink)
No Life Poster
 
koperta4512's Avatar
 
Join Date: Dec 2011
Location: Poland
Posts: 1,166
Member: 1704846
Status: Offline
Sonork: 1617108
Thanks Meter: 117
Because the cable is not needed, go to youtube and find how to unlock phone via SETool.
  Reply With Quote
Old 10-06-2012, 10:40   #8 (permalink)
No Life Poster
 
dampealdany's Avatar
 
Join Date: May 2010
Location: South America
Age: 41
Posts: 1,134
Member: 1308889
Status: Offline
Sonork: 100.1608156
Thanks Meter: 266
can you show us the picture with the test point please, and i hear that this model LT18i canīt be unlocked, models made in 2012 can not be unlock. thx for some aclarations pls
  Reply With Quote
Old 11-11-2012, 11:21   #9 (permalink)
No Life Poster
 
.::Indian::.'s Avatar
 
Join Date: Aug 2003
Location: Kerala
Posts: 941
Member: 37015
Status: Offline
Thanks Meter: 67
CARD COUNTERS: FLASH 174, UNLOCK 54
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start.
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 107 secs.


how can solve this error?
  Reply With Quote
Old 11-11-2012, 12:25   #10 (permalink)
No Life Poster
 
:Aishur:'s Avatar
 
Join Date: Jun 2010
Age: 14
Posts: 2,863
Member: 1315677
Status: Offline
Thanks Meter: 1,437
new security (99.99%) if erom >=r9xxxx and YearwWeek >=12w14

read post #12 HOW TO WORK WITH SEMC PDA PHONES - Page 2
  Reply With Quote
Old 06-24-2013, 15:19   #11 (permalink)
Freak Poster
 
Join Date: Jul 2006
Location: lusaka
Posts: 279
Member: 320108
Status: Offline
Thanks Meter: 18
Donate money to this user
Quote:
Originally Posted by kosta25 View Post
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 64 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000010

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE


this log is not for LT18i and its misleading
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_LOADER VER "R4A069"
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"

PHONE IMEI : 35850604242826
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1256]
WRITING SEMCBOOT ...
Unlock DONE

Procedure:
1.
prepare for testpoint operation.
check testpoints location for your phone model in dist\docs\s1_qualcomm_uart_cables or use GPG cable set
open testpoints for access
if you do not have GPG cable set, get some needle with wire, connect it to phone gnd ( battery minus ) or to usb cable shield, etc.

2.
select proper phone model.
select COM as interface.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset, use testpoint (gnd type)
fill login/password and check if account valid.

press unlock

when prompted, execute steps in EXACT order:
  1. remove cable from phone,
  2. remove battery from phone,
  3. attach testpoint ( turn on switch on cable set )
  4. insert cable to phone, HOLDING TESTPOINT ( cable set switch in "on" position )
  5. press "ready"
  6. when prompted detach testpoint
  7. press "ready"
  8. install drivers from dist\drivers\USBFlash_driver\ ( if asked )
phone will be unlocked.
this log is misleading and its not for LT18i
  Reply With Quote
Old 05-28-2016, 19:55   #12 (permalink)
No Life Poster
 
Kwesi_Roy_GH's Avatar
 
Join Date: May 2016
Location: Madina, Accra, GHANA
Posts: 1,181
Member: 2575234
Status: Offline
Thanks Meter: 1,134
Donate money to this user
28/05/2016 17:20:21 RUNNING v 1.1404/01.15/UNI
28/05/2016 17:20:21 CARD SERIAL 00236xxx
28/05/2016 17:20:21 USBFLASH DRIVER VERSION 03.00.00.00
28/05/2016 17:26:12 SIGNED MODE (USING SERVER)
28/05/2016 17:26:12 ALTERNATIVE SECURITY BYPASS ENABLED
28/05/2016 17:26:12 CFG:110010000000
28/05/2016 17:26:12
28/05/2016 17:26:12 DETACH USB CABLE FROM PHONE
28/05/2016 17:26:12 REMOVE BATTERY FROM PHONE
28/05/2016 17:26:12 ATTACH TESTPOINT
28/05/2016 17:26:12 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
28/05/2016 17:26:12
28/05/2016 17:28:03 PROCESSING ...
28/05/2016 17:28:04 REMOVE TESTPOINT NOW, THEN PRESS "READY"
28/05/2016 17:28:04
28/05/2016 17:28:12 PLEASE ATTACH TURNED OFF PHONE NOW
28/05/2016 17:28:12 PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
28/05/2016 17:28:14
28/05/2016 17:28:14 RUNNING S1_LOADER VER "R4A069"
28/05/2016 17:28:14
28/05/2016 17:28:14 EROM_AID : 0001
28/05/2016 17:28:14 LOADER_AID : 0001
28/05/2016 17:28:14 HWCONF_AID : 0001
28/05/2016 17:28:14 ACTIVE_LOADER_AID : 0001
28/05/2016 17:28:14
28/05/2016 17:28:18 DEVICE ID: 18A5E74DCEEED365ED81393AC49DBCD1B171D1F7
28/05/2016 17:28:18 FLASH ID: "002C/00B3"
28/05/2016 17:28:18 LOADER VERSION: "r4A069"
28/05/2016 17:28:18
28/05/2016 17:28:18 PHONE IMEI : 35850604218325
28/05/2016 17:28:20 Checking for signature ...
28/05/2016 17:28:21 WRITING SEMCBOOT ...
28/05/2016 17:28:22 Unlock DONE
28/05/2016 17:28:22 Elapsed: 130 secs.
  Reply With Quote
The Following User Says Thank You to Kwesi_Roy_GH For This Useful Post:
Old 09-12-2016, 15:48   #13 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: Banjul The Gambia
Age: 34
Posts: 158
Member: 2257138
Status: Offline
Thanks Meter: 9
how to connect the test point , please diagram
  Reply With Quote
Old 09-12-2016, 20:42   #14 (permalink)
No Life Poster
 
koperta4512's Avatar
 
Join Date: Dec 2011
Location: Poland
Posts: 1,166
Member: 1704846
Status: Offline
Sonork: 1617108
Thanks Meter: 117
http://www.x10unlocked.com/images/te...SE_LT18_TP.jpg
  Reply With Quote
Old 04-27-2017, 09:27   #15 (permalink)
No Life Poster
 
snmobilecenter's Avatar
 
Join Date: Mar 2009
Location: Kathmandu,Nepal
Age: 46
Posts: 2,185
Member: 983663
Status: Offline
Sonork: 100.1623270
Thanks Meter: 551
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

will use DLOAD protocol ...
0806010100900000
0D1450424C5F446F776E6C6F6164657256455231
030006
030006
030006
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

qcReceivePacket: can't get packet start
IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 30 seconds

Not done
  Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
$50 Reward for unlocking my 6150!!! TheDon Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 5 03-23-2015 14:21
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 06:26.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.24451 seconds with 9 queries

SEO by vBSEO