m5650 lindy flash - GSM-Forum

mp3hot · 09-24-2010, 09:10

trying to flash m5650 lindy .... first i tried to IDENTIFY phone and i get :

Code:

RUNNING v 1.085/UNI
CARD SERIAL 069
USBFLASH DRIVER VERSION 02.02.00.05 
CFG:000000000000
ChipID:D900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,26,0,35*]
OTP LOCKED:1 CID:26 PAF:0 IMEI:35* CERT:BROWN
not supported at the moment
Elapsed: 145 secs.

Gdfs backup ok

Code:

SIGNED MODE (USING SERVER)
CFG:100000000000
Will backup GDFS now.
ChipID:D900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,26,0,35866703063484]
OTP LOCKED:1 CID:26 PAF:0 IMEI:35* CERT:BROWN
LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRAM_P2A
LDR CAPS:SYSTEM FLASH SIGNATURE 
LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDRAM_JEFF_CABS_P2A
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM 
got 203 GDFS units
got 1207 GDFS units
gdfs read done,gdfs_35*.zip written
Phone detached
Elapsed: 55 secs.

mp3hot · 09-24-2010, 09:25

now i need to know what setting to put for flashing .. thanks

mp3hot · 09-24-2010, 10:02

i flashed with M5650UZCJF1 & flash file wasnt good .. its m5650U and its in japanese so
then i flashed to M5650XXIL3 and i get error:
ALLOWED DOMAINS:BLUE BROWN
MAXIMUM CID:26
Will flash 564 blocks...
block (000B0000/00010000) not accepted,error:90
Elapsed: 63 secs.

i tried to reflash to M5650UZCJF1 & i get same error

so now phone dead ...any ideas ?

mp3hot · 09-24-2010, 10:29

i tried to flash GDFS backup and still i get error ... sounds like phone dead for good !

Quote:

BOOTROM MODE DETECTED
OTP DBG: [1,26,0,35*]
OTP LOCKED:1 CID:26 PAF:0 IMEI:35* CERT:BROWN
LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRA M_P2A
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDR AM_JEFF_CABS_P2A
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
will write 1943 units
[gdfs_writevar] err:000B
Elapsed: 46 secs.

it hangs here .. why ?

mp3hot · 09-24-2010, 23:33

cant believe no hints/suggestions

:Aishur: · 09-25-2010, 13:15

Some reports about error 90 lead to setool could not write that block (000B0000)
It is same like the old error ldr_on_ldr hdr no ack,err:10

old setool faq about the second error

Quote:

but what say to customer if phone works before servicing? have no idea - think yourself- that is risk that you including in each service cost. sadly, but such thing can be happened - flash sector can read good, but fails on erase/write.

Anyways, try to rehot the flash chip

Good luck

mp3hot · 09-25-2010, 14:04

really doubt rehotting flash chip would help at all , considering phone is brand new .

Q:
i trying to service w810/w300/z530/z550/k310/k510 phone and getting
such result

Code:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
ldr_on_ldr hdr no ack,err:10

what to do ? phone was working before !!! (variant: phone was dead before)

A:

that is hardware problem and nothing to do with software. usually it is bad soldered flash chip.
latest mid-range semc phones quality is below zero.

as last resort, you can try to raise voltage on FLASH VPP upto 12v
(for start, try to flash it with dcu60, it also has increased voltage)

but what say to customer if phone works before servicing?
have no idea - think yourself- that is risk that you including in each service cost.
sadly, but such thing can be happened - flash sector can read good, but fails on erase/write.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Nokia Flash Content.	Phantom	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-01-2000 23:28

09-24-2010, 09:25	#2 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	now i need to know what setting to put for flashing .. thanks

09-24-2010, 10:02	#3 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	i flashed with M5650UZCJF1 & flash file wasnt good .. its m5650U and its in japanese so then i flashed to M5650XXIL3 and i get error: ALLOWED DOMAINS:BLUE BROWN MAXIMUM CID:26 Will flash 564 blocks... block (000B0000/00010000) not accepted,error:90 Elapsed: 63 secs. i tried to reflash to M5650UZCJF1 & i get same error so now phone dead ...any ideas ?

09-24-2010, 23:33	#5 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	cant believe no hints/suggestions

09-25-2010, 14:04	#7 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	really doubt rehotting flash chip would help at all , considering phone is brand new . Q: i trying to service w810/w300/z530/z550/k310/k510 phone and getting such result Code: ChipID:8040,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:49 Speed:921600 ldr_on_ldr hdr no ack,err:10 what to do ? phone was working before !!! (variant: phone was dead before) A: that is hardware problem and nothing to do with software. usually it is bad soldered flash chip. latest mid-range semc phones quality is below zero. as last resort, you can try to raise voltage on FLASH VPP upto 12v (for start, try to flash it with dcu60, it also has increased voltage) but what say to customer if phone works before servicing? have no idea - think yourself- that is risk that you including in each service cost. sadly, but such thing can be happened - flash sector can read good, but fails on erase/write.