m5650 reading errror - GSM-Forum

mp3hot · 05-05-2011, 21:53

trying to read flash file of m5650 and get error ... will try with latest setool and post result

OTP LOCKED:1 CID:26 PAF:0 IMEI:35866703214323 CERT:BROWN
LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRA M_P2A
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDR AM_JEFF_CABS_P2A
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
Will read 00020000 bytes,starting from 44000000
Reading:131072 bytes
[readflash] err: [008F] at: [44000000]
[A2_shutdown] can't get ACK
Elapsed: 58 secs.

mp3hot · 05-05-2011, 22:03

same error with latest setool .. maybe m5650 is new boot ?

RUNNING v 1.106/UNI
CARD SERIAL 000
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID

900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,26,0,35866703214323]
OTP LOCKED:1 CID:26 PAF:0 IMEI:35 CERT:BROWN
LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRA M_P2A
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDR AM_JEFF_CABS_P2A
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
Will read 00020000 bytes,starting from 44000000
Reading:131072 bytes
[readflash] err: [008F] at: [44000000]
[A2_shutdown] can't get ACK
Elapsed: 44 secs.

the_laser · 05-06-2011, 12:36

no, it is because you do not know what you want to do.

mp3hot · 05-06-2011, 12:45

i want to read flash file from working phone so i flash it with on my dead m5650

the_laser · 05-06-2011, 17:52

you can read, but you can't write firmware to phone.

most probably,that will not be possible at all in near future.

mp3hot · 05-08-2011, 09:31

thanks for your replies laser .... buT ...

how come u said i can read but its giving me error when trying to read ?
how come u said i cant write firmware to phone AND the first time i flashed the phone it flashed fine but the second time onwards it didnt let me at all ?

so u can write firmware but only ONCE ( in my experience )

the_laser · 05-09-2011, 11:55

1. you can't read flash because you set wrong start address.
2. you can flash SIGNED (original) firmware any number of times. you can NOT flash UNSIGNED (readed) firmware at all (for samsung a2 phones)

GSM-KHAN · 05-20-2011, 23:31

I HOPE THIS HELPS YOU,
FOLLOW THIS TUTORIAL IF YOU WANT TO FLASH SAMSUNG m5650
first of all download the following three files,
1- the dowloader
https://rapidshare.com/files/1967728...er_v069_05.zip
2-the usb drivers
https://rapidshare.com/files/1827564...Driver_EMP.zip
3- the firmware files
https://rapidshare.com/files/1531943515/M5650XXIL3.rar

after you have downloaded the files unzip the downloader and all flashfiles

1-Run Samsung M5650 DOWNLOADER
2-From the Product drop down menu select: M5650 model.
3-Click FFS button and select: M5650xxxxx_FFS.ssw
4-Click RC button and select: M5650xxxxx_RC.ssw
5-Click ACC GDFS button and select: M5650xxxxx_ACC_GDFS.gdf
6-Click APP GDFS button and select: M5650xxxxx_APP_GDFS_LOW.gdf
7-Click Main button and select: M5650xxxxx_MAIN.ssw
8-Click Ready button then click Port Search button.

NOW HOLD VOLUME DOWN KEY + CAMERA KEY and connect the phone to usb cable.
now the programe will detect your phone.
when your phone has been detected by the program click the start button and it will start flashing your phone, do not uplug or move usb cable during the flash process. wait until its finished.

05-05-2011, 21:53	#1 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	m5650 reading errror trying to read flash file of m5650 and get error ... will try with latest setool and post result OTP LOCKED:1 CID:26 PAF:0 IMEI:35866703214323 CERT:BROWN LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRA M_P2A LDR CAPS:SYSTEM FLASH SIGNATURE LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDR AM_JEFF_CABS_P2A LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM Will read 00020000 bytes,starting from 44000000 Reading:131072 bytes [readflash] err: [008F] at: [44000000] [A2_shutdown] can't get ACK Elapsed: 58 secs.

05-05-2011, 22:03	#2 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	same error with latest setool .. maybe m5650 is new boot ? RUNNING v 1.106/UNI CARD SERIAL 000 USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) CFG:100000000000 ChipID900,EMP protocol:0401 BOOTROM MODE DETECTED OTP DBG: [1,26,0,35866703214323] OTP LOCKED:1 CID:26 PAF:0 IMEI:35 CERT:BROWN LDR:090923 1531 MATCXC1723918_C9_DB3200_PRODUCTION_LOADER_ACC_SDRA M_P2A LDR CAPS:SYSTEM FLASH SIGNATURE LDR:090923 1533 MATCXC1723919_1C9_DB3200_PRODUCTION_LOADER_APP_SDR AM_JEFF_CABS_P2A LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM Will read 00020000 bytes,starting from 44000000 Reading:131072 bytes [readflash] err: [008F] at: [44000000] [A2_shutdown] can't get ACK Elapsed: 44 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
read eeprom write eeprom, what do i need?	jonthe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	12-08-2010 06:24
unable to reads phone type..	Rosshire	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	07-17-2000 15:55
Silly question!! Why is it impossible to read out the mastercode of Nokia phones????	MyKe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-26-1999 14:31

05-06-2011, 12:36	#3 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	no, it is because you do not know what you want to do.

05-06-2011, 12:45	#4 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	i want to read flash file from working phone so i flash it with on my dead m5650

05-06-2011, 17:52	#5 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	you can read, but you can't write firmware to phone. most probably,that will not be possible at all in near future.

05-08-2011, 09:31	#6 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	thanks for your replies laser .... buT ... how come u said i can read but its giving me error when trying to read ? how come u said i cant write firmware to phone AND the first time i flashed the phone it flashed fine but the second time onwards it didnt let me at all ? so u can write firmware but only ONCE ( in my experience )

05-09-2011, 11:55	#7 (permalink)
the_laser No Life Poster Join Date: Feb 2002 Location: Russia Age: 44 Posts: 2,681 Member: 9519 Status: Offline Thanks Meter: 2,150	1. you can't read flash because you set wrong start address. 2. you can flash SIGNED (original) firmware any number of times. you can NOT flash UNSIGNED (readed) firmware at all (for samsung a2 phones)

05-20-2011, 23:31	#8 (permalink)
GSM-KHAN Insane Poster Join Date: Dec 2009 Posts: 68 Member: 1190895 Status: Offline Thanks Meter: 6	I HOPE THIS HELPS YOU, FOLLOW THIS TUTORIAL IF YOU WANT TO FLASH SAMSUNG m5650 first of all download the following three files, 1- the dowloader https://rapidshare.com/files/1967728...er_v069_05.zip 2-the usb drivers https://rapidshare.com/files/1827564...Driver_EMP.zip 3- the firmware files https://rapidshare.com/files/1531943515/M5650XXIL3.rar after you have downloaded the files unzip the downloader and all flashfiles 1-Run Samsung M5650 DOWNLOADER 2-From the Product drop down menu select: M5650 model. 3-Click FFS button and select: M5650xxxxx_FFS.ssw 4-Click RC button and select: M5650xxxxx_RC.ssw 5-Click ACC GDFS button and select: M5650xxxxx_ACC_GDFS.gdf 6-Click APP GDFS button and select: M5650xxxxx_APP_GDFS_LOW.gdf 7-Click Main button and select: M5650xxxxx_MAIN.ssw 8-Click Ready button then click Port Search button. NOW HOLD VOLUME DOWN KEY + CAMERA KEY and connect the phone to usb cable. now the programe will detect your phone. when your phone has been detected by the program click the start button and it will start flashing your phone, do not uplug or move usb cable during the flash process. wait until its finished.