My 3 credits lose during unlock j108i - GSM-Forum

attique1973 · 05-25-2015, 08:33

my 3 credits lose during unlock j108i my user name is attique1973

khalidjan · 05-25-2015, 08:37

how to unlock
---------------
q:
how to unlock j108 phone without s1 signature server to be online ?

a:
you need to have setool2 v1.1285 or higher.
you need to have test sim card ( with mnc/mcc 00101 ) in phone.
you need to have memory card in phone.
you need to have valid username/password with at least 3 credits.
phone should be in working state.

procedure is complicated and definitely NOT for beginners.

1.
flash any R7EA011 firmware into phone.
fully power on phone, wait until phone setup will be completed.
this is absolute requirement.

2.
run setool2, check that valid username/password entered, then go to "j108 bypass" tab.
press "upload executor package"

insert test sim card, memory card, connect powered off phone while holding "C" button
after initial procedure, disconnect phone , power on it, wait until setup complete and power off phone again.

3.
press "upload executor extractor"

insert test sim card, memory card, connect powered off phone while holding "C" button
after initial procedure, disconnect phone , power on it, wait until setup complete

set usb connection in phone options to "file transfer" and copy from memory card "other\executor.b" to setool2\backup\%imei% .
setool2 will open that folder for you in minimized state, check taskbar.

( if your system recognize phone as MTP device, you can copy file without setting USB connection to "file transfer" )

power off phone.

4.
press "unlock phone"

insert test sim card, memory card, connect powered off phone while holding "C" button
after initial procedure, disconnect phone , power on it,

set usb connection in phone options to "other OS"
install phone MODEM drivers, if required ( dist\drivers\Modem_Drivers )
wait, until setool2 finish procedure.

after setool2 finish procedure, do not disconnect phone from cable, do not remove phone battery, until phone powers on by itself.
otherwise you need to restore secunits backup and repeat step 3 from beginning.

this is not patch unlock, phone unlock is permanent

05-25-2015, 08:33	#1 (permalink)
attique1973 Junior Member Join Date: Feb 2008 Posts: 33 Member: 703530 Status: Offline Thanks Meter: 1	My 3 credits lose during unlock j108i my 3 credits lose during unlock j108i my user name is attique1973

05-25-2015, 08:37	#2 (permalink)
khalidjan No Life Poster Join Date: Nov 2007 Location: United State Of Islam Age: 34 Posts: 2,054 Member: 624551 Status: Offline Sonork: 100.1584837 Thanks Meter: 737	how to unlock --------------- q: how to unlock j108 phone without s1 signature server to be online ? a: you need to have setool2 v1.1285 or higher. you need to have test sim card ( with mnc/mcc 00101 ) in phone. you need to have memory card in phone. you need to have valid username/password with at least 3 credits. phone should be in working state. procedure is complicated and definitely NOT for beginners. 1. flash any R7EA011 firmware into phone. fully power on phone, wait until phone setup will be completed. this is absolute requirement. 2. run setool2, check that valid username/password entered, then go to "j108 bypass" tab. press "upload executor package" insert test sim card, memory card, connect powered off phone while holding "C" button after initial procedure, disconnect phone , power on it, wait until setup complete and power off phone again. 3. press "upload executor extractor" insert test sim card, memory card, connect powered off phone while holding "C" button after initial procedure, disconnect phone , power on it, wait until setup complete set usb connection in phone options to "file transfer" and copy from memory card "other\executor.b" to setool2\backup\%imei% . setool2 will open that folder for you in minimized state, check taskbar. ( if your system recognize phone as MTP device, you can copy file without setting USB connection to "file transfer" ) power off phone. 4. press "unlock phone" insert test sim card, memory card, connect powered off phone while holding "C" button after initial procedure, disconnect phone , power on it, set usb connection in phone options to "other OS" install phone MODEM drivers, if required ( dist\drivers\Modem_Drivers ) wait, until setool2 finish procedure. after setool2 finish procedure, do not disconnect phone from cable, do not remove phone battery, until phone powers on by itself. otherwise you need to restore secunits backup and repeat step 3 from beginning. this is not patch unlock, phone unlock is permanent