NEW Update-Setool2 Card Update Information and TroubleShooting [ ALWAYS READ 1st Post

[movitelx]

New UPDATE to Post !!!

Originally Posted by the_laser

q:
how to update setool2 card ? what do i need ?
a:
to update setool2 card, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934
put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.
server address is:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )
you will get "Ready to work" text.
press "update card" button only after you get that.
if your setool2 card not activated ( you can NOT use setool2 version > 1.01 )
you need 20 credits for initial card update.
Credits will be discounted AUTOMATICALLY WITHOUT CONFIRMATION.
if your card eligible for update, you will see following text:

setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "update_test"
Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 12345678
Checking with server...
setool2 card not activated, credits will be used......
Uploading............................................................................
Update completed

you will get usual "no credits" message in case if you do not have needed credits amount.

in time after time, we will update setool2 smartcard, corresponding notice will be posted in news.
for normal update you do not need any credits, but valid setool2 account required.
if your card eligible for normal update, you will see following text:

setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "update_test"
Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 12345678
Checking with server.........
Uploading............................................................................
Update completed

if card already updated, you will get following text:

SmartCard update started...
CARD SERIAL: 12345678
Checking with server.
cmd err: [request denied]

if you getting that text and your card NOT updated, you should post request in that thread with ONLY your account username and setool2 card, admin will check issue and write resolution.

New UPDATE to Post !!!
most bad thing that can happen:
if you will get next results

SmartCard update started.....
CARD SERIAL: 00xxxxxxx
Checking with server......
auth #1 err: 6982

that means your card was permanently tampered by some tools and you stuck to v1.106
nothing can be done at all.
please note, that after initial update you can only use setool2 version >= v1.107
q:
how to activate LGTool ? what do i need ?
a:
to activate LGTool, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934
you do not need to have setool2 credits on account.
you should buy activation from LGTool reseller first for your setool2 card.
put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.
server address is:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )
you will get "Ready to work" text.
Then press "Activate LGTool" button
if your card eligible for activation, you will get next text:
you need to buy LGtool activation before attempt to activate LGtool.
Otherwise you will get "request denied" error. That is absolutely normal in that case.

setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "update_test"
Please click on reader with setool2 SmartCard.
Ready to work
Checking with server..
LG application activated

[movitelx]

Take care ZX3 user

BR
GUAR FORUM

Originally Posted by the_laser

zulea's software not check smartcard atr, just selected cardmanager and auth with 255 attempts using wrong keys.
i checked program code and posted it on gsmcity long time ago.
you really think, z3x card programmer so stupid to auth against cardmanager of card, where z3x applet not found ?
i do not think so.
i can see only one possibility - z3x contain function for recovering from interrupted update, after interrupted update there is no z3x applets in card, so they using recovery function to reupload applet.
if stupid user will select setool2 smartcard in z3x shell, it will be shown as z3x in recovery mode and smartcard will be authenticated with z3x keys, effectively assuring cardmanager block after few attempts.
but i'm sure that z3x also recording recovery serial on their server and NOT allow smartcard recovery, if recovery serial NOT in database.
that renders smartcard damage impossible by using z3x recovery function.

Originally Posted by MANOLE
This time I have to contradict you. And here are the facts:

1. I am setool distributor, do you think zulea is so stupid to kill my business ?
2. Your cards are NOT jcop cards, so is impossible to be killed by any of zulea's software/viruses.
3. You are not in any way related to fatty cheater Razvan ******* aka Raskal aka Potato Man, zulea destroy only his products.

This is not mean your cards can not be killed.
And let me give you a clue: please chk z3x box shell software, they used same cards as setool and that software try to authenticate, that is a possible killer.

Best Regards,
Manole

[syifa__phone]

lazher matre...........................................

[michihiko_ku]

I already update card with updater..and its seems succesfuly....

setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "abmexxxxx"
Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 0000xxxxx
Checking with server.........
Uploading......................................... ...................................
Update completed

But after update i try to open setool 1.107 its showing card error...and i try with older version its showing the same warning....is anyone can help me with this problem...

And to make sure the card is conect i try open with updater again and its still can read the serial of the card....

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "abmexxxx"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 000xxxxxx
Checking with server.
cmd err: [request denied]


Please anyone can help me......

[Nizda Mobile]

Originally Posted by michihiko_ku

I already update card with updater..and its seems succesfuly....

setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "abmexxxxx"
Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 0000xxxxx
Checking with server.........
Uploading......................................... ...................................
Update completed

But after update i try to open setool 1.107 its showing card error...and i try with older version its showing the same warning....is anyone can help me with this problem...

And to make sure the card is conect i try open with updater again and its still can read the serial of the card....

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "abmexxxx"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 000xxxxxx
Checking with server.
cmd err: [request denied]


Please anyone can help me......

unplug your box,connect again and open a setool software

[andre128]

why need update? for LG tools?