Pls help! - GSM-Forum

KUBAT1 · 12-01-2008, 19:12

I am too much sorry, I am just transfered from Cruiser to Setool3, and suffering of some using difficulties.I absolutally can not flash a phone with setool? always get CID mismatch, pls see the log and help for some information where is the mistake???
Regards

v0.914040/UNI
CARD SERIAL: 00083xxx
Loaded 51 flash descriptors

ALTERNATIVE SECURITY BYPASS DISABLED !
ENABLE "SIGNED MODE" !

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35536301xxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
phone CID not supported in that mode
Elapsed: 8 secs.

shedeed · 12-01-2008, 20:38

Just Go To Setting And Mark On Signed Mode
Thats All
Regards

xerraco · 12-02-2008, 01:53

In Flashing you have to Check Signed Mode & Complete Phone in DB2012 & DB2020.

.:SUBRATA:. · 12-02-2008, 05:57

I would suggest you to take a look at these videos

http://www.setool.net/video/index.php

this videos help me a lot

Thanks !

KUBAT1 · 12-03-2008, 19:36

Quote:

Originally Posted by shedeed

Just Go To Setting And Mark On Signed Mode
Thats All
Regards

I already checked Signed Mode, sure!!

videos good idea..

mauro1947 · 12-04-2008, 00:57

And please, upgrade your SE Tool version...

12-01-2008, 19:12	#1 (permalink)
KUBAT1 Registered User Join Date: Feb 2004 Location: MERSIN, TURKEY Posts: 1,260 Member: 55026 Status: Offline Thanks Meter: 53	Pls help! I am too much sorry, I am just transfered from Cruiser to Setool3, and suffering of some using difficulties.I absolutally can not flash a phone with setool? always get CID mismatch, pls see the log and help for some information where is the mistake??? Regards v0.914040/UNI CARD SERIAL: 00083xxx Loaded 51 flash descriptors ALTERNATIVE SECURITY BYPASS DISABLED ! ENABLE "SIGNED MODE" ! ChipID:9900,EMP protocol:0301 BOOTROM MODE DETECTED Speed:921600 OTP LOCKED:1 CID:51 PAF:1 IMEI:35536301xxxxxx CERT:N/A FLASH CID:52 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok phone CID not supported in that mode Elapsed: 8 secs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
infinity team pls help??? e71+ firmware. help??nfinity team pls. help??	vintel	Infinity-Box	4	03-07-2010 11:29
pls pls pls help me for e65	sidah-gsm	BB5BOX	4	01-28-2008 10:16
Pls Pls Pls Help Me	ctg60000	WD2 & APE (Symbian Phones)	3	10-31-2006 12:50
PLS PLs PLS help me u8120 v102 hi red box help help	sunnyc	LG	1	11-17-2004 18:34
Pls help me my siemens c-35 keypad Hang pls help me	varma raj	x1x to x45/x50	1	06-17-2003 10:50

12-01-2008, 20:38	#2 (permalink)
shedeed No Life Poster Join Date: Jun 2007 Location: E G Y P T Age: 37 Posts: 2,527 Member: 527884 Status: Offline Sonork: 100.1583794 Thanks Meter: 850	Just Go To Setting And Mark On Signed Mode Thats All Regards

12-02-2008, 01:53	#3 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	In Flashing you have to Check Signed Mode & Complete Phone in DB2012 & DB2020.

12-02-2008, 05:57	#4 (permalink)
.:SUBRATA:. No Life Poster Join Date: Jul 2006 Location: Bangladesh Age: 42 Posts: 5,925 Member: 319447 Status: Offline Thanks Meter: 4,949	I would suggest you to take a look at these videos http://www.setool.net/video/index.php this videos help me a lot Thanks !

12-04-2008, 00:57	#6 (permalink)
mauro1947 Freak Poster Join Date: Aug 2005 Location: Buenos Aires - Argentina Posts: 412 Member: 173538 Status: Offline Thanks Meter: 258	And please, upgrade your SE Tool version...