S1 Patch Unlock Feature Require Release >= v0.915043. - GSM-Forum

NADEEM GONDAL · 09-06-2009, 19:20

Q: What Is That Fuzz About S1 Patch Unlock ? What is difference from full Unlock?

A:
s1 patch unlock feature require release >= v0.915043.

1. Patch Unlock is NOT Permanent, it will be removed if you flash phone and you need to repeat it again

2. s1 patch unlock will NOT fix damaged security zone and REQUIRE valid security zone.

3. to use s1 patch unlock you need credits

4. procedure as follows

- Select PROPER model (that is extremely important)
- On settings check BOTH "signed mode (using server)" AND "use Alternative security bypass"
- Select desired interface (usb preferred for neptune phones)
- Press unlock

Q:
I Had Flashed s1 phone and credits were Spend From my account ??? Why????
Ihad readed flash part from s1 phone and Credits Were Spend from my Account ? why?

A:

You Had checked "use alternative security bypass" option, that require credits.
That Feature is Only and only for Very Special Cases, like restoring Completely Damaged Trim area And other very specific Requirements.

amalou · 09-06-2009, 23:47

FREE, By The_Lazer S1 Patch Unlock, time Limited t303,t250,t280,r300,w302 etc..
v0.915043

- added RESET mode for db200x,db201x,db2020 phones.
after such operation phone will became developer (brown) state.
you can do anything with phone (write gdfs, unlock,etc) while phone
in that state.

you can find all details in FAQ

- as side effect, pda emptyboard fill now enabled.

- added PATCH unlock for S1 phones (new security, old security, etc)
notice, that phones must have NOT TAMPERED security zone.
you can find all details in FAQ

please note, that it is PATCH unlock and after fullflash
phone will be locked again.

same thing applies to possible incorrect operation - just flash phone.

- as side effect, added possibility to flash unsigned firmware in any S1 phone.
that allow users to repair phones with damaged trim area.
that require s1 signature server, hopefully it will be online one day.

http://rapidshare.com/files/275892500/v0.915043.rar

L a O · 09-07-2009, 04:15

just wanna ask how much credits will it take?

for s1 phones?

tia
bR

Amir-SkillZ · 09-07-2009, 04:47

that is very-very beta software.
s1 patch unlock should be tested throughly.
we tested t303,t250,t280,r300,w302 but not other models,though they
should be supported just fine.

because of that, during short beta testing period price for
s1 security bypass, db200x,db201x,db2020 reset operation will be ZERO credits.

after short beta testing period we will setup corresponding price.

Amir-SkillZ · 09-07-2009, 04:49

a Personally Tested Free Patch Unlock Here
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:10100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...

EROM "R5A036" AID: 0001
SOFTWARE AID: 0001
SIMLOCK STATE: "1"
LOADER AID: 0002
FLASH ID: "0089/8904"
LOADER VERSION: "R3A011"

PHONE IMEI:356xxxxxxxxxxxx
GOT SEED:43BC232B8400F032C300709C
P96 AUTH PASSED
Searching...
SIMLOCK CHECK FOUND
Writing...
Unlock DONE
Elapsed: 48 secs.

Amir-SkillZ · 09-07-2009, 04:52

HOW to Use RESET Button for db200x/db201x,db2020 Phones (AKA convert to Brown to Repair GDFS ETC)
q: how i can repair any software problem in db200x/db201x,db2020 phone ?
phone totally damaged, identify not working, gdfs is corrupted, erom is absent, etc.

a:
that feature require release >= v0.915043.

1. make sure you have needed quantity of credits on your account
2. select proper model
3. on settings check only "signed mode (using server)"
4.
if phone db200x,db201x select COM/UFS as interface.
if phone is db2020 - you can select COM/UFS/USB as interface.
5. press "recovery".
6. if phone hardware okay (flash chip,ram,etc) - phone will be reset to developer status (brown)
7. now proceed as usual ( tp repair step 6) - write gdfs,erom,whatsoever

Amir-SkillZ · 09-07-2009, 04:54

NOTE ..
FOR Testing or Using the Patch Unlock or The RESET feature for db200x/db201x,db2020 Phones
U need to Have a Valid Account on Server With or Without Credits ...Only for NOW Until New Prices Were Announced

soft@man · 09-07-2009, 04:56

HI ALL

Can You poste vedio tesst

shamshad quresh · 09-07-2009, 05:00

How unlock new security t303 t250 and t 280 with new exe 915043.

NADEEM GONDAL · 09-07-2009, 05:00

Quote:

Originally Posted by L a O

just wanna ask how much credits will it take?

for s1 phones?

tia
bR

You Need Valid Account With At Least ZERO Credits.

NawabN Sahoo · 09-07-2009, 05:03

Quote:

now proceed as usual ( tp repair step 6) - write gdfs,erom,whatsoever

Does we still need TP procedure and how much logs does it spend for repairing GDFS?

WBR

NADEEM GONDAL · 09-07-2009, 05:15

Quote:

Originally Posted by NawabN Sahoo

Does we still need TP procedure and how much logs does it spend for repairing GDFS?

WBR

Use Current Setool2 Version And Forgot About Testpoint - Nightmare Is over.

shamshad quresh · 09-07-2009, 05:16

How unlock new security t303 t250 and t 280 with new exe 915043.

NADEEM GONDAL · 09-07-2009, 05:19

Quote:

Originally Posted by shamshad quresh

How unlock new security t303 t250 and t 280 with new exe 915043.

Man Read this Carefully
http://forum.gsmhosting.com/vbb/show...12&postcount=1

Amir-SkillZ · 09-07-2009, 05:45

Quote:

Originally Posted by NawabN Sahoo

Does we still need TP procedure and how much logs does it spend for repairing GDFS?

WBR

It means After Resetting phone proceed as we do in tp Procedure write Erom ro GDFS ...its just a Workout..Not Saying tp is Required

09-06-2009, 19:20	#1 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	S1 Patch Unlock Feature Require Release >= v0.915043. Q: What Is That Fuzz About S1 Patch Unlock ? What is difference from full Unlock? A: s1 patch unlock feature require release >= v0.915043. 1. Patch Unlock is NOT Permanent, it will be removed if you flash phone and you need to repeat it again 2. s1 patch unlock will NOT fix damaged security zone and REQUIRE valid security zone. 3. to use s1 patch unlock you need credits 4. procedure as follows - Select PROPER model (that is extremely important) - On settings check BOTH "signed mode (using server)" AND "use Alternative security bypass" - Select desired interface (usb preferred for neptune phones) - Press unlock Q: I Had Flashed s1 phone and credits were Spend From my account ??? Why???? Ihad readed flash part from s1 phone and Credits Were Spend from my Account ? why? A: You Had checked "use alternative security bypass" option, that require credits. That Feature is Only and only for Very Special Cases, like restoring Completely Damaged Trim area And other very specific Requirements.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Notes on S1 Patch Unlock	bestin	SETool2	0	10-29-2009 16:00
s1 patch unlock real story	adnanali	SETool2	11	09-07-2009 22:06
J132 new security unlock ok...j132 unlock ok with v0.915043	aleem26	SETool2	0	09-07-2009 05:59
S1 Patch unlock + RED BLINK Without TP soon in SETOOL	mujahid_ali	SETool2	45	09-03-2009 17:25

09-06-2009, 23:47	#2 (permalink)
amalou Freak Poster Join Date: Feb 2008 Location: SOUTH AFRICA Posts: 141 Member: 702077 Status: Offline Thanks Meter: 85	FREE, By The_Lazer S1 Patch Unlock, time Limited t303,t250,t280,r300,w302 etc.. v0.915043 - added RESET mode for db200x,db201x,db2020 phones. after such operation phone will became developer (brown) state. you can do anything with phone (write gdfs, unlock,etc) while phone in that state. you can find all details in FAQ - as side effect, pda emptyboard fill now enabled. - added PATCH unlock for S1 phones (new security, old security, etc) notice, that phones must have NOT TAMPERED security zone. you can find all details in FAQ please note, that it is PATCH unlock and after fullflash phone will be locked again. same thing applies to possible incorrect operation - just flash phone. - as side effect, added possibility to flash unsigned firmware in any S1 phone. that allow users to repair phones with damaged trim area. that require s1 signature server, hopefully it will be online one day. http://rapidshare.com/files/275892500/v0.915043.rar

09-07-2009, 04:15	#3 (permalink)
L a O Freak Poster Join Date: Jun 2009 Location: San Mateo Rizal Philippines Posts: 136 Member: 1047483 Status: Offline Sonork: 100.1641679 Thanks Meter: 7	just wanna ask how much credits will it take? for s1 phones? tia bR

09-07-2009, 04:47	#4 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	that is very-very beta software. s1 patch unlock should be tested throughly. we tested t303,t250,t280,r300,w302 but not other models,though they should be supported just fine. because of that, during short beta testing period price for s1 security bypass, db200x,db201x,db2020 reset operation will be ZERO credits. after short beta testing period we will setup corresponding price.

09-07-2009, 04:49	#5 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	a Personally Tested Free Patch Unlock Here SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:10100000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS "POWER ON" BUTTON SHORTLY... EROM "R5A036" AID: 0001 SOFTWARE AID: 0001 SIMLOCK STATE: "1" LOADER AID: 0002 FLASH ID: "0089/8904" LOADER VERSION: "R3A011" PHONE IMEI:356xxxxxxxxxxxx GOT SEED:43BC232B8400F032C300709C P96 AUTH PASSED Searching... SIMLOCK CHECK FOUND Writing... Unlock DONE Elapsed: 48 secs.

09-07-2009, 04:52	#6 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	HOW to Use RESET Button for db200x/db201x,db2020 Phones (AKA convert to Brown to Repair GDFS ETC) q: how i can repair any software problem in db200x/db201x,db2020 phone ? phone totally damaged, identify not working, gdfs is corrupted, erom is absent, etc. a: that feature require release >= v0.915043. 1. make sure you have needed quantity of credits on your account 2. select proper model 3. on settings check only "signed mode (using server)" 4. if phone db200x,db201x select COM/UFS as interface. if phone is db2020 - you can select COM/UFS/USB as interface. 5. press "recovery". 6. if phone hardware okay (flash chip,ram,etc) - phone will be reset to developer status (brown) 7. now proceed as usual ( tp repair step 6) - write gdfs,erom,whatsoever

09-07-2009, 04:54	#7 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	NOTE .. FOR Testing or Using the Patch Unlock or The RESET feature for db200x/db201x,db2020 Phones U need to Have a Valid Account on Server With or Without Credits ...Only for NOW Until New Prices Were Announced

09-07-2009, 04:56	#8 (permalink)
soft@man Freak Poster Join Date: Mar 2004 Location: MEKNES Age: 45 Posts: 482 Member: 58404 Status: Offline Thanks Meter: 65	HI ALL Can You poste vedio tesst

09-07-2009, 05:00	#9 (permalink)
shamshad quresh No Life Poster Join Date: Nov 2008 Location: pakistan Posts: 1,944 Member: 898041 Status: Offline Sonork: 100.1593459 Thanks Meter: 549	How unlock new security t303 t250 and t 280 with new exe 915043.

09-07-2009, 05:16	#13 (permalink)
shamshad quresh No Life Poster Join Date: Nov 2008 Location: pakistan Posts: 1,944 Member: 898041 Status: Offline Sonork: 100.1593459 Thanks Meter: 549	How unlock new security t303 t250 and t 280 with new exe 915043.