Setool user please check this problem

[thomp4pal]

S.E K850i always error when try to repair Gdfs or flash phone always this error
Phone is dead no power on athough, TA open error when i press Identify

SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,52,1,35887401224353]
OTP LOCKED:1 CID:52 PAF:1 IMEI:35887401224353 CERT:BROWN
LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
LDR CAPS:SYSTEM FLASH SIGNATURE
LDR:2009-06-26 15:49 CXC1250779_DB31XX_EXPLORER_LOADER_APP_SDRAM_R2A082
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
writing "D:\REPAIRS TOOLS AND STUFFS\MOBILE PHONES\FIRMWARES\SE\SE-TOOL\K850\Cid 52\R1CA029_12004398_ORANGE_SO.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:52
Will flash 693 blocks...
flash address (60180000) not accepted,error:39
Elapsed: 27 secs.

I tried repair Ta via this procedure still Error

damaged trim area (ta_open errors)

1. select proper model or model,based on same chipset
2.
skip that step, if phone already r&d (brown).
convert phone to r&d (brown) domain, for that unlock phone in alternative security bypass mode with brown domain set.
3.
if your phone based on db3150 chipset - add to firmware area Shinobu_TA.ssw
if your phone based on db3200 chipset - add to firmware area elle_ta.ssw
if your phone based on db3210 chipset - add to firmware area Shiho_TA.ssw
if your phone based on db3350 chipset - add to firmware area aino_ta.ssw
(exception should be done for latest db3350 phones: w20,j10,j20 - aino_ta.ssw will not work for them)
4. set ecc mode: none (0)
5. on settings, check only signed mode
6. press flash
7. get gdfs package from proper model working phone, add it to misc. field
8. press write gdfs
9. unlock phone using alternative security bypass mode
10. reflash phone fully.

alternative way, need to use at least setool2 1.08

1. select proper model or model,based on same chipset
2.
skip that step, if phone already r&d (brown).
convert phone to r&d (brown) domain, for that unlock phone in alternative security bypass mode with brown domain set.
3. select in misc. edit proper gdfs package, DO NOT unzip gdfs package, just select it as is.
4. on settings, check only signed mode
5. press write gdfs
6. unlock phone using alternative security bypass mode
7. reflash phone fully.

Always error, Anyone face this problem what is solution pls.

[zakizakifa]

i also got this problem...

[apostrofe]

greetings, may be a hardware problem mostly on fastport connector try a full cleaning and resold pieces nearby most of the times it will fix it!