Setool2 Card Update Information and TroubleShooting - GSM-Forum

xxxman · 06-09-2011, 15:32

q:
how to update setool2 card ? what do i need ?

a:

to update setool2 card, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934

put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
press "update card" button only after you get that.

if your setool2 card not activated ( you can NOT use setool2 version > 1.01 )
you need 20 credits for initial card update.
Credits will be discounted AUTOMATICALLY WITHOUT CONFIRMATION.

if your card eligible for update, you will see following text:

Code:

setool2 SmartCard updater [0.92]  server read: "srv01.dontexist.com" username read: "update_test"  Please click on reader with setool2 SmartCard. Ready to work SmartCard update started..... CARD SERIAL: 12345678 Checking with server... setool2 card not activated, credits will be used...... Uploading............................................................................ Update completed

you will get usual "no credits" message in case if you do not have needed credits amount.

in time after time, we will update setool2 smartcard, corresponding notice will be posted in news.
for normal update you do not need any credits, but valid setool2 account required.
if your card eligible for normal update, you will see following text:

Code:

setool2 SmartCard updater [0.92]  server read: "srv01.dontexist.com" username read: "update_test"  Please click on reader with setool2 SmartCard. Ready to work SmartCard update started... CARD SERIAL: 12345678 Checking with server......... Uploading............................................................................ Update completed

if card already updated, you will get following text:

Code:

SmartCard update started... CARD SERIAL: 12345678 Checking with server. cmd err: [request denied]

if you getting that text and your card NOT updated, you should post request in that thread with ONLY your account username and setool2 card, admin will check issue and write resolution.

please note, that after initial update you can only use setool2 version >= v1.107

q:
how to activate LGTool ? what do i need ?

a:
to activate LGTool, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934
you do not need to have setool2 credits on account.
you should buy activation from LGTool reseller first for your setool2 card.

put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
Then press "Activate LGTool" button

if your card eligible for activation, you will get next text:

Code:

setool2 SmartCard updater [0.92]  server read: "srv01.dontexist.com" username read: "update_test"  Please click on reader with setool2 SmartCard. Ready to work Checking with server.. LG application activated

xxxman · 06-09-2011, 16:03

here is the logs .

Code:

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
COULD NOT READ USERNAME
Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 00XXXXXX
Checking with server.........
Uploading............................................................................
Update completed

rajalion · 06-09-2011, 16:37

whats new in 1.07 ???

ktkwajid · 06-09-2011, 16:39

thanks ..update successfully!!

Code:

SmartCard update started.....
CARD SERIAL: 000*****
Checking with server.........
Uploading............................................................................
Update completed

sikandarmehdi · 06-09-2011, 16:47

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "devil"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 12345678
Checking with server.
cmd err: [bad username/password]

jacekchec · 06-09-2011, 16:50

SmartCard update started.....
CARD SERIAL: 00xxxxxxx
Checking with server......
auth #1 err: 6982

username and password is good

ktkwajid · 06-09-2011, 17:07

http://imageshack.us/photo/my-images/6/updatings.jpg/

kaaniletisim · 06-09-2011, 22:28

Well I bought reseller aktiveli way to update, but now I want to read the error when I try the user name, now what do I say the wrong user name and password

tachiouine · 06-09-2011, 22:37

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "devil"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 0*******
Checking with server.
cmd err: [bad username/password]

carlos32 · 06-09-2011, 23:50

y ppl ken enyone explain what y doo rong????y kent do this update ur dont now how?????

mobile_zone1 · 06-10-2011, 00:03

Activation done.

carlos32 · 06-10-2011, 00:27

Please click on reader with setool2 SmartCard.
Ready to work
Ready to work
SmartCard update started.....
CARD SERIAL: 00xxxxxx
Checking with server.
cmd err: [request denied]

ken eny person tell what is this error?

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 00xxxxxx
Checking with server.
cmd err: [request denied]
LG application not found

girl@user · 06-10-2011, 01:27

how can i get valid username and password for my setool to update my smartcard?
it is activated..
we need the solution ASAP

thank you

BR
Binoy

.::AZEEM::. · 06-10-2011, 02:49

Quote:

Originally Posted by the_laser

q:
how to update setool2 card ? what do i need ?

a:

to update setool2 card, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934

put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
press "update card" button only after you get that.

if your setool2 card not activated ( you can NOT use setool2 version > 1.01 )
you need 20 credits for initial card update.
Credits will be discounted AUTOMATICALLY WITHOUT CONFIRMATION.

if your card eligible for update, you will see following text:

Code:

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "update_test"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started.....
CARD SERIAL: 12345678
Checking with server...
setool2 card not activated, credits will be used......
Uploading............................................................................
Update completed

you will get usual "no credits" message in case if you do not have needed credits amount.

in time after time, we will update setool2 smartcard, corresponding notice will be posted in news.
for normal update you do not need any credits, but valid setool2 account required.
if your card eligible for normal update, you will see following text:

Code:

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "update_test"

Please click on reader with setool2 SmartCard.
Ready to work
SmartCard update started...
CARD SERIAL: 12345678
Checking with server.........
Uploading............................................................................
Update completed

if card already updated, you will get following text:

Code:

SmartCard update started...
CARD SERIAL: 12345678
Checking with server.
cmd err: [request denied]

if you getting that text and your card NOT updated, you should post request in that thread with ONLY your account username and setool2 card, admin will check issue and write resolution.

most bad thing that can happen:

if you will get next results

Code:

SmartCard update started.....
CARD SERIAL: 00xxxxxxx
Checking with server......
auth #1 err: 6982

that means your card was permanently tampered by some tools and you stuck to v1.106
nothing can be done at all.

please note, that after initial update you can only use setool2 version >= v1.107

q:
how to activate LGTool ? what do i need ?

a:
to activate LGTool, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934
you do not need to have setool2 credits on account.
you should buy activation from LGTool reseller first for your setool2 card.

put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
Then press "Activate LGTool" button

if your card eligible for activation, you will get next text:

Code:

setool2 SmartCard updater [0.92]

server read: "srv01.dontexist.com"
username read: "update_test"

Please click on reader with setool2 SmartCard.
Ready to work
Checking with server..
LG application activated

Best reg
Setool team

.::AZEEM::. · 06-10-2011, 02:50

Quote:

Originally Posted by jacekchec

SmartCard update started.....
CARD SERIAL: 00xxxxxxx
Checking with server......
auth #1 err: 6982

username and password is good

that means your card was permanently tampered by some tools and you stuck to v1.106
nothing can be done at all.

06-09-2011, 16:39	#4 (permalink)
ktkwajid No Life Poster Join Date: Nov 2007 Location: Extel Telecom . Dubai. Posts: 835 Member: 625961 Status: Offline Sonork: 100.1590447 Thanks: 92 Thanked 855 Times in 238 Posts	thanks ..update successfully!! Code: SmartCard update started..... CARD SERIAL: 000***** Checking with server......... Uploading............................................................................ Update completed

06-09-2011, 16:47	#5 (permalink)
sikandarmehdi Freak Poster Join Date: May 2010 Posts: 145 Member: 1299153 Status: Offline Thanks: 317 Thanked 14 Times in 9 Posts	setool2 SmartCard update err setool2 SmartCard updater [0.92] server read: "srv01.dontexist.com" username read: "devil" Please click on reader with setool2 SmartCard. Ready to work SmartCard update started..... CARD SERIAL: 12345678 Checking with server. cmd err: [bad username/password]

06-10-2011, 01:27	#13 (permalink)
girl@user Freak Poster Join Date: Jun 2006 Location: in your eyes Posts: 100 Member: 287010 Status: Offline Thanks: 51 Thanked 30 Times in 20 Posts	how can i get valid username and password for my setool to update my smartcard? it is activated.. we need the solution ASAP thank you BR Binoy Last edited by girl@user; 06-10-2011 at 01:33.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sim card sleep mode problem with 6130	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	Yesterday 11:13
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	11-15-2011 12:08
read/write Sim cards	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	07-18-2010 13:42
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	06-13-1999 19:18

06-09-2011, 16:37	#3 (permalink)
rajalion Freak Poster Join Date: May 2009 Location: UK Posts: 291 Member: 1033807 Status: Offline Thanks: 239 Thanked 351 Times in 93 Posts	whats new in 1.07 ???

06-09-2011, 16:50	#6 (permalink)
jacekchec Freak Poster Join Date: Sep 2005 Location: lublin Age: 34 Posts: 276 Member: 181258 Status: Offline Thanks: 63 Thanked 26 Times in 23 Posts	SmartCard update started..... CARD SERIAL: 00xxxxxxx Checking with server...... auth #1 err: 6982 username and password is good

06-09-2011, 17:07	#7 (permalink)
ktkwajid No Life Poster Join Date: Nov 2007 Location: Extel Telecom . Dubai. Posts: 835 Member: 625961 Status: Offline Sonork: 100.1590447 Thanks: 92 Thanked 855 Times in 238 Posts	http://imageshack.us/photo/my-images/6/updatings.jpg/

06-09-2011, 22:28	#8 (permalink)
kaaniletisim No Life Poster Join Date: Aug 2004 Location: ==TÜRKİYE== Age: 37 Posts: 991 Member: 79065 Status: Offline Sonork: 1577556 Thanks: 2,228 Thanked 37 Times in 32 Posts	Well I bought reseller aktiveli way to update, but now I want to read the error when I try the user name, now what do I say the wrong user name and password

06-09-2011, 22:37	#9 (permalink)
tachiouine Freak Poster Join Date: Jul 2005 Age: 33 Posts: 231 Member: 160601 Status: Offline Thanks: 175 Thanked 18 Times in 12 Posts	setool2 SmartCard updater [0.92] server read: "srv01.dontexist.com" username read: "devil" Please click on reader with setool2 SmartCard. Ready to work SmartCard update started..... CARD SERIAL: 0******* Checking with server. cmd err: [bad username/password]

06-09-2011, 23:50	#10 (permalink)
carlos32 No Life Poster Join Date: Nov 2009 Location: Portugal ....eny place Posts: 889 Member: 1166261 Status: Offline Thanks: 997 Thanked 110 Times in 84 Posts	y ppl ken enyone explain what y doo rong????y kent do this update ur dont now how?????

06-10-2011, 00:03	#11 (permalink)
mobile_zone1 No Life Poster Join Date: Feb 2010 Location: FROM-PERÚ Posts: 597 Member: 1242979 Status: Offline Sonork: ☻9-9126-6305☻ Thanks: 3,106 Thanked 210 Times in 118 Posts	Activation done.

06-10-2011, 00:27	#12 (permalink)
carlos32 No Life Poster Join Date: Nov 2009 Location: Portugal ....eny place Posts: 889 Member: 1166261 Status: Offline Thanks: 997 Thanked 110 Times in 84 Posts	Please click on reader with setool2 SmartCard. Ready to work Ready to work SmartCard update started..... CARD SERIAL: 00xxxxxx Checking with server. cmd err: [request denied] ken eny person tell what is this error? Please click on reader with setool2 SmartCard. Ready to work SmartCard update started..... CARD SERIAL: 00xxxxxx Checking with server. cmd err: [request denied] LG application not found