so-03c can't detect on setool, no network after unlock,.

[markrempillo]

hi setool team,.. pls help me with this unit,.

1st-tried to unlock-phone become dead and can't detect on setool,.
2nd-repair phone using other soft, success repair but need to flash.
3rd-flash tru setool and phone comeback to life with imei 0000000
4th-unlock and chnge imei tru tp-success,.

but here's the problem:

-no network
-not detected when i try to reflash

i think ta is damage, so i repair TA area via recovery and TA successfully
write via recovery,.

but still no network and cant detect on usb to reflash,.

pls need help,.. i want to try to write gdfs like ive read on setool support forum but how? it cant detect while pressing volume down and insert usb cable,.ive already have r800.gdfs to write,.

[markrempillo]

problem solved,..

-repair phone using medusa software, phone become dead
-imei 0000000 after repair
-phone is dead-good for dgfs writing,.
-write r800 gdfs,. or any semc qsd8x55-based phones
-on setool-check same procedure on unlocking, check also change imei,.
-reflash via setool again, signmode, customize,.
-then smile,.

[the_laser]

first 3 steps are irrational.

here is repair way for phones with totally damaged trim area ( that should NEVER happen with normal phone service operations )

1.
check "signed mode, altbypass mode, format trim area when writing"
add trim area package from same model phone to misc area
press "write gdfs"

2.
check "signed mode, altbypass mode, do full unlock, allow to change imei when unlocking"
press "unlock/repair"

3.
reflash phone with "signed mode" only option


here is repair way for phones with damaged security ( this is most common problem )

1.
check "signed mode, altbypass mode, do full unlock, allow to change imei when unlocking"
press "unlock/repair"

2.
power on phone, if phone can't power on,then reflash phone with "signed mode" only option