Sony Ericsson J20i unlock fail

[tukara]

Hello I cant unlock the J20i with setool, I tried both ways.

this is the identify log

CFG:001110001000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081

OTP: LOCKED:1 CID:81 PAF:1 IMEI:0000000000 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096

Model (from GDFS): J20i
MAPP CXC article: R7CA061 prg1231-9304_GENERIC_SY
MAPP CXC version: R7CA061
Language Package: VFE-A
CDA article: 1244-4118
CDA version: R1A
Default article: 1231-9366
Default version: R7CA061
PROVIDER: MULTIPLE LOCKS
Network LOCKED

SECURITY UNITS BACKUP CREATED.
Elapsed: 9 secs.
After uhnlock

ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081

OTP: LOCKED:1 CID:81 PAF:1 IMEI:000000000000 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH SIGNATURE AUTH
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH GDFS FILESYSTEM TA
Unlock DONE
Elapsed: 16 secs.

nothing happen.
Help !!!!

[sahil2000ind]

WRONG SETTINGS.

IMEI-0000000000


WBR
sahil2000ind

[tukara]

Originally Posted by sahil2000ind

WRONG SETTINGS.

IMEI-0000000000


WBR
sahil2000ind

I just erase the correct imei to put it here,
could you tell me the correct settings ?

[koperta4512]

1.select proper model
2.on settings, check
"signed mode",
"do full unlock instead usercode reset",
"disable flash mode activation for semc a2 phones",
fill login details
3.back to semc a2 tab, press unlock
4.when prompted, install phone modem drivers
(they can be found in drivers\Modem_Drivers or will be automatically installed if you install semc pc suite)
5.when you will get message "unlock done" - do not remove cable or battery,
wait until phone automatically power on, otherwise you will get 5 locks and need to repeat procedure.

[yahia ali]

Originally Posted by koperta4512

1.select proper model
2.on settings, check
"signed mode",
"do full unlock instead usercode reset",
"disable flash mode activation for semc a2 phones",
fill login details
3.back to semc a2 tab, press unlock
4.when prompted, install phone modem drivers
(they can be found in drivers\Modem_Drivers or will be automatically installed if you install semc pc suite)
5.when you will get message "unlock done" - do not remove cable or battery,
wait until phone automatically power on, otherwise you will get 5 locks and need to repeat procedure.

thanks bro ,how cost logs to unlock this phone?

[sahil2000ind]

3 CREDIT

URE PHONE CID IS 81 U CAN'T UNLOCK IT WITHOUT S1 SERVER ONLINE



CHECK HERE :- SETooL Official Support Forum

RUNNING v 1.1299/01.15/UNI
CARD SERIAL 00000000
USBFLASH DRIVER VERSION 03.00.00.00 
CFG:000000000000

short credits consumption list :
Services OFFLINE 
S1 v1	xx credits
S1 v2	xx credits
S1 OPEN AID 004	xx credits 
CID81 A2 phones, FLASHMODE activation way	xx credits

Services ONLINE 
A1 phones	03 credits
S1 OPEN	03 credits
A2 phones, CSCA way	03 credits

S1 v2 alternative bypass unlock/repair	01 credits
S1 v2 alternative bypass STANDALONE activation  10 credits
W100,W150 codes	01 credits

You  CAN NOT unlock next phones without S1 servers:
u1/u5/u8 aid 004,
LoCosto,Neptune-based phones with damaged security zone,
LoCosto,Neptune-based phones with loader AID 004, 
w100,w150 full unlock,ck13,ck15,wt13,
any SONY phone, released from 2012 year

current updater version: 0.95
current setool2 version: 1.1299
SERVER CREDITS LEFT/USED: 0/0
CARD COUNTERS: FLASH 448, UNLOCK 323
Elapsed: 5 secs.

WBR
sahil2000ind

[koperta4512]

Unlock via CSCA metod work. Flash mode (S1 server) not work.

[tukara]

Originally Posted by koperta4512

1.select proper model
2.on settings, check
"signed mode",
"do full unlock instead usercode reset",
"disable flash mode activation for semc a2 phones",
fill login details
3.back to semc a2 tab, press unlock
4.when prompted, install phone modem drivers
(they can be found in drivers\Modem_Drivers or will be automatically installed if you install semc pc suite)
5.when you will get message "unlock done" - do not remove cable or battery,
wait until phone automatically power on, otherwise you will get 5 locks and need to repeat procedure.

Thank you very much, I would post my result.

[almalizy]

Originally Posted by koperta4512

1.select proper model
2.on settings, check
"signed mode",
"do full unlock instead usercode reset",
"disable flash mode activation for semc a2 phones",
fill login details
3.back to semc a2 tab, press unlock
4.when prompted, install phone modem drivers
(they can be found in drivers\Modem_Drivers or will be automatically installed if you install semc pc suite)
5.when you will get message "unlock done" - do not remove cable or battery,
wait until phone automatically power on, otherwise you will get 5 locks and need to repeat procedure.

thanks it is 100%
Elapsed: 41 secs.
SIGNED MODE (USING SERVER)
CFG:100011000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081

OTP: LOCKED:1 CID:81 PAF:1 IMEI:01269400116433 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH SIGNATURE AUTH
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH GDFS FILESYSTEM TA
Executing CSCA-based unlock.
Checking for signature ...
signature found, skipping calculation
Backup security data ...
Erasing locks ...

DISCONNECT PHONE NOW
REMOVE SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM227
PHONE READY TO PROCEED.
GOT SEED: 005CA07C
ACTIVATION COMPLETED. USERCODE RESET TO "0000"
DO NOT DISCONNECT PHONE FROM CABLE
UNTIL PHONE TURNS ON BY ITSELF
Unlock DONE
Elapsed: 815 secs.