Sony Ericsson LT15 arc unlock succesfully by setool3 - GSM-Forum

gsm_links · 09-08-2011, 11:53

RUNNING v 1.1107/01.11/UNI
CARD SERIAL done
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
SERVER CREDITS LEFT/USED: 10/20
CARD COUNTERS: FLASH 40, UNLOCK 3
Elapsed: 6 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON ...

RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"

PHONE IMEI:888888888888
MODEL (from GDFS): LT15i
SOFTWARE VERSION: 1241-4324_3.0.1.A.0.145
CUSTOM VERSION: 1247-2534_R11C
FILESYSTEM VERSION: WORLD-1-8_3.0.1.A.0.145
SERIAL NO: CB5A1DDLV4
Elapsed: 139 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON ...

RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"

PHONE IMEI:01268200206185
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1256]
FINALIZING ...
Unlock DONE
Elapsed: 58 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000

simple just read faq.

how to unlock s1 android based phones using alternative security bypass using testpoint?

a:
first, that is ONLY applicable to phones, based on msm8255 chipset - lt15,mt15,r800, some upcoming models.
Here is procedure.

1.
prepare for testpoint operation.
check testpoint location for your phone model in dist\docs\
open testpoint for access
get some needle with wire, connect it to phone gnd ( battery minus ) or to usb cable shield, etc.

2.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
fill login/password and check if account valid.

press unlock

when prompted, execute steps in EXACT order:

remove cable from phone,
remove battery from phone,
attach testpoint
press "ready"
insert cable to phone, HOLDING TESTPOINT
install drivers from dist\drivers\USBFlash_driver\
when prompted detach testpoint
press "ready"

Wbr

s n hasan

bakarioss · 09-08-2011, 16:11

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON ...

RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "R4A069"

PHONE IMEI:01268200xxxxxx
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1256]
FINALIZING ...
Unlock DONE
Elapsed: 95 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
SERVER CREDITS LEFT/USED: 5/25
CARD COUNTERS: FLASH 661, UNLOCK 412
Elapsed: 3 secs.

urecel · 09-08-2011, 21:55

how many credits it need?

gsm_links · 09-09-2011, 07:10

Quote:

Originally Posted by urecel

how many credits it need?

5 credits .

Wbr

s n hasan

09-08-2011, 11:53	#1 (permalink)
gsm_links No Life Poster Join Date: Aug 2007 Location: India\China Posts: 1,340 Member: 561947 Status: Offline Sonork: 100.1580399 Thanks Meter: 948	Sony Ericsson LT15 arc unlock succesfully by setool3 RUNNING v 1.1107/01.11/UNI CARD SERIAL done USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 SERVER CREDITS LEFT/USED: 10/20 CARD COUNTERS: FLASH 40, UNLOCK 3 Elapsed: 6 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT PRESS "READY", THEN ATTACH USB CABLE TO PHONE PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON ... RUNNING S1_LOADER VER "R4A062" LOADER AID: 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A069" PHONE IMEI:888888888888 MODEL (from GDFS): LT15i SOFTWARE VERSION: 1241-4324_3.0.1.A.0.145 CUSTOM VERSION: 1247-2534_R11C FILESYSTEM VERSION: WORLD-1-8_3.0.1.A.0.145 SERIAL NO: CB5A1DDLV4 Elapsed: 139 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT PRESS "READY", THEN ATTACH USB CABLE TO PHONE PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON ... RUNNING S1_LOADER VER "R4A062" LOADER AID: 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A069" PHONE IMEI:01268200206185 Checking for signature ... Waiting for calculation process ... RESPONSE: "SUCCESS" [1256] FINALIZING ... Unlock DONE Elapsed: 58 secs. SIGNED MODE (USING SERVER) CFG:100000000000 simple just read faq. how to unlock s1 android based phones using alternative security bypass using testpoint? a: first, that is ONLY applicable to phones, based on msm8255 chipset - lt15,mt15,r800, some upcoming models. Here is procedure. 1. prepare for testpoint operation. check testpoint location for your phone model in dist\docs\ open testpoint for access get some needle with wire, connect it to phone gnd ( battery minus ) or to usb cable shield, etc. 2. select proper phone model. on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset fill login/password and check if account valid. press unlock when prompted, execute steps in EXACT order: remove cable from phone, remove battery from phone, attach testpoint press "ready" insert cable to phone, HOLDING TESTPOINT install drivers from dist\drivers\USBFlash_driver\ when prompted detach testpoint press "ready" Wbr s n hasan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17

09-08-2011, 16:11	#2 (permalink)
bakarioss No Life Poster Join Date: Oct 2003 Location: @@Afsus_ tunisia-sat@@ Age: 63 Posts: 1,625 Member: 42750 Status: Offline Thanks Meter: 114	DETACH USB CABLE FROM PHONE REMOVE BATTERY FROM PHONE ATTACH TESTPOINT PRESS "READY", THEN ATTACH USB CABLE TO PHONE PROCESSING ... REMOVE TESTPOINT NOW, THEN PRESS "READY" PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON ... RUNNING S1_LOADER VER "R4A062" LOADER AID: 0001 FLASH ID: "0098/00B3" LOADER VERSION: "R4A069" PHONE IMEI:01268200xxxxxx Checking for signature ... Waiting for calculation process ... RESPONSE: "SUCCESS" [1256] FINALIZING ... Unlock DONE Elapsed: 95 secs. SIGNED MODE (USING SERVER) ALTERNATIVE SECURITY BYPASS ENABLED CFG:110010000000 SERVER CREDITS LEFT/USED: 5/25 CARD COUNTERS: FLASH 661, UNLOCK 412 Elapsed: 3 secs.

09-08-2011, 21:55	#3 (permalink)
urecel No Life Poster Join Date: Jun 2007 Age: 37 Posts: 798 Member: 520810 Status: Offline Thanks Meter: 231	how many credits it need?