Sucessfully unlocked LT15 and R800i - GSM-Forum

mediaextensions · 08-09-2011, 14:34

Successfully unlocked 2 LT15 and 1 R800i Steps 1.select proper phone model. 2.on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset 3.fill login/password and check if account valid. 4.press unlock 5.then with battery hold back key and insert usb cable. At this stage,when prompted, execute steps in EXACT order: 1. remove cable from phone, 2. remove battery from phone, 3. attach testpoint 4. press ready 5. insert cable to phone, HOLDING TESTPOINT 6. install drivers from dist\drivers\USBFlash_driver\ NB. Again when prompted for drivers, (this time it will be installed as ZEUS in USB controllers) it will be found in SETOOL FOLDER/drivers/usb flash drivers/ again if done correctly it should show ZEUS. not qualcomm 7. when prompted detach testpoint 8. press ready

mediaextensions · 08-09-2011, 14:44

Sucessfully unlocked 2 LT15 and 1 R800i

Code:

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_EROM VER &quot;R9A021&quot;
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: &quot;002C/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
PHONE IMEI:01hhhhhhhhhhhh8
Checking for signature ...
signature found, skipping calculation
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS &quot;READY&quot;, THEN ATTACH USB CABLE TO PHONE
 
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS &quot;READY&quot;
 
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_LOADER VER &quot;R4A062&quot;
LOADER AID: 0001
FLASH ID: &quot;002C/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
FINALIZING ...
Unlock DONE

Code:

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110010000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_EROM VER &quot;R9A021&quot;
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: &quot;0098/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
PHONE IMEI:01hhhhhhhhhh7
Checking for signature ...
Waiting for calculation process ...
RESPONSE: &quot;SUCCESS&quot; [1256]
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS &quot;READY&quot;, THEN ATTACH USB CABLE TO PHONE
 
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS &quot;READY&quot;
 
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_LOADER VER &quot;R4A062&quot;
LOADER AID: 0001
FLASH ID: &quot;0098/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
FINALIZING ...
Unlock DONE
Elapsed: 74 secs.

Code:

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED

CFG:110010000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_EROM VER &quot;R9A021&quot;
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: &quot;002C/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
PHONE IMEI:35hhhhhhhhh09
Checking for signature ...
signature found, skipping calculation
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS &quot;READY&quot;, THEN ATTACH USB CABLE TO PHONE
 
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS &quot;READY&quot;
 
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD &quot;BACK&quot; BUTTON ...
 
RUNNING S1_LOADER VER &quot;R4A062&quot;
LOADER AID: 0001
FLASH ID: &quot;002C/00B3&quot;
LOADER VERSION: &quot;R4A069&quot;
 
FINALIZING ...
Unlock DONE
Elapsed: 69 secs.

Regards The Laser,
Mediaextensions.

badsha007 · 08-10-2011, 18:53

sir how to use test pin i have unlock by 5 cradit but no un lock !!!!any body help me how to [email protected]

top50gsm · 08-19-2011, 16:33

i need test point for r800i

GNS_KUMAR73 · 09-04-2011, 12:19

plz atach test point pic.

oxygene31dz · 09-06-2011, 00:24

the testpoint in in folder setool ( docs ) chek and find .
but it is not the problem, the problem is the step by step procedure.

bandari2 · 10-21-2011, 12:44

Quote:

Originally Posted by mediaextensions

Successfully unlocked 2 LT15 and 1 R800i Steps 1.select proper phone model. 2.on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset 3.fill login/password and check if account valid. 4.press unlock 5.then with battery hold back key and insert usb cable. At this stage,when prompted, execute steps in EXACT order: 1. remove cable from phone, 2. remove battery from phone, 3. attach testpoint 4. press ready 5. insert cable to phone, HOLDING TESTPOINT 6. install drivers from dist\drivers\USBFlash_driver\ NB. Again when prompted for drivers, (this time it will be installed as ZEUS in USB controllers) it will be found in SETOOL FOLDER/drivers/usb flash drivers/ again if done correctly it should show ZEUS. not qualcomm 7. when prompted detach testpoint 8. press ready

after attaching testpoint does the battery get put back in

Malik Irfan85 · 10-21-2011, 16:00

nice link useful info dear .

Emmanuel Ankah · 09-29-2012, 11:45

octopus :R800 dead after unlock
Welcome to Octopus Suite version 1.1.2
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Octopus smart card is present.
Please, reconnect battery, hold "back" key and connect USB cable...Canceled.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, SE Unlimited
Authorizing...OKOK
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Please, reconnect battery, attach testpoint and connect USB cable...OK
Sending preloader...OK
Please, disconnect testpoint.
Waiting for preloader...OK
Reading info...
Sending loader...Failed!
Preloader communicate failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Please, reconnect battery, hold "back" key and connect USB cable...OK
Reading info...
Chipset: Unknown
IMEI:
MSN:
Sending loader...Failed!
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Please, reconnect battery, hold "back" key and connect USB cable...Canceled.
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, SE Unlimited
Authorizing...OKOK
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: R800i
Please, reconnect battery, attach testpoint and connect USB cable...OK
Sending preloader...OK
Please, disconnect testpoint.
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 357,,,,,,,,,,,,,,,,,,,,,
Checking security...OK
Reading security area...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_Suite\BACKUP\Sony
Ericsson_R800i_357,,,,,,,,,,,,,,,,,,,,,,,_29-09-2012_03-35-41.BKP"
Checking TA...OK
IMEI: 357,,,,,,,,,,,,,,,
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Checking security area...
Writing security area...OK
Checking TA...OK
Shutting down...OK
Phone sucesfully unlocked!

08-09-2011, 14:34	#1 (permalink)
mediaextensions No Life Poster Join Date: Sep 2009 Location: K'dua , 3rd Fl Main K'si St GH Posts: 1,135 Member: 1123079 Status: Offline Sonork: 100.1586814 Thanks Meter: 439	Sucessfully unlocked LT15 and R800i Successfully unlocked 2 LT15 and 1 R800i Steps 1.select proper phone model. 2.on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset 3.fill login/password and check if account valid. 4.press unlock 5.then with battery hold back key and insert usb cable. At this stage,when prompted, execute steps in EXACT order: 1. remove cable from phone, 2. remove battery from phone, 3. attach testpoint 4. press ready 5. insert cable to phone, HOLDING TESTPOINT 6. install drivers from dist\drivers\USBFlash_driver\ NB. Again when prompted for drivers, (this time it will be installed as ZEUS in USB controllers) it will be found in SETOOL FOLDER/drivers/usb flash drivers/ again if done correctly it should show ZEUS. not qualcomm 7. when prompted detach testpoint 8. press ready Last edited by mediaextensions; 08-09-2011 at 14:44.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

08-10-2011, 18:53	#3 (permalink)
badsha007 Freak Poster Join Date: May 2009 Location: ATHENS-GREECE Age: 42 Posts: 248 Member: 1022280 Status: Offline Thanks Meter: 14	sir how to use test pin i have unlock by 5 cradit but no un lock !!!!any body help me how to [email protected]

08-19-2011, 16:33	#4 (permalink)
top50gsm Freak Poster Join Date: Dec 2005 Location: gallerie7-tunis Posts: 181 Member: 211028 Status: Offline Sonork: 100.1587652 Thanks Meter: 23	i need test point for r800i

09-04-2011, 12:19	#5 (permalink)
GNS_KUMAR73 Freak Poster Join Date: Dec 2007 Location: canuaght place palika bazaar Posts: 243 Member: 647773 Status: Offline Sonork: 100.1611571 Thanks Meter: 65	plz atach test point pic.

09-06-2011, 00:24	#6 (permalink)
oxygene31dz Freak Poster Join Date: Jul 2006 Age: 38 Posts: 178 Member: 304160 Status: Offline Thanks Meter: 12	the testpoint in in folder setool ( docs ) chek and find . but it is not the problem, the problem is the step by step procedure.

10-21-2011, 16:00	#8 (permalink)
Malik Irfan85 No Life Poster Join Date: Jan 2011 Location: in your Heart Posts: 2,220 Member: 1484062 Status: Offline Sonork: 1610135 Thanks Meter: 218	nice link useful info dear .

09-29-2012, 11:45	#9 (permalink)
Emmanuel Ankah Freak Poster Join Date: Aug 2005 Location: Accra.Ghana Age: 51 Posts: 306 Member: 167261 Status: Offline Thanks Meter: 19	octopus :R800 dead after unlock Welcome to Octopus Suite version 1.1.2 -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Octopus smart card is present. Please, reconnect battery, hold "back" key and connect USB cable...Canceled. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Connecting to server...OK Octopus smart card is present. Checking smart card...OK Smart card activations: LG, SE Unlimited Authorizing...OKOK -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Please, reconnect battery, attach testpoint and connect USB cable...OK Sending preloader...OK Please, disconnect testpoint. Waiting for preloader...OK Reading info... Sending loader...Failed! Preloader communicate failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Please, reconnect battery, hold "back" key and connect USB cable...OK Reading info... Chipset: Unknown IMEI: MSN: Sending loader...Failed! -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Please, reconnect battery, hold "back" key and connect USB cable...Canceled. -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Connecting to server...OK Octopus smart card is present. Checking smart card...OK Smart card activations: LG, SE Unlimited Authorizing...OKOK -------------------------------------------------------------------------------- Platform: SE Qualcomm Selected model: R800i Please, reconnect battery, attach testpoint and connect USB cable...OK Sending preloader...OK Please, disconnect testpoint. Waiting for preloader...OK Reading info... Sending loader...OK Reading info...OK IMEI: 357,,,,,,,,,,,,,,,,,,,,, Checking security...OK Reading security area...OK Backup saved to "C:\Program Files\GsmServer\Octopus_Suite\BACKUP\Sony Ericsson_R800i_357,,,,,,,,,,,,,,,,,,,,,,,_29-09-2012_03-35-41.BKP" Checking TA...OK IMEI: 357,,,,,,,,,,,,,,, Calculating security on the server... Sending TA to server...OK Calculating. Please, wait...OK Receiving TA...OK Checking security area... Writing security area...OK Checking TA...OK Shutting down...OK Phone sucesfully unlocked!