Unlock for Sony Ericsson J108 with setool

[ruroni925]

From the 1.1285 version of setool, these sony ericsson and can be released, the process is a little long, but here and done well it understandable to all members of GSMDEC

materials:
An account of Setool with 3 credits
A test card
MicroSD memory for the phone
Phone USB Cable
Setool version 1.1286 as minimum


To release this phone have to flash the phone to version R7EA011

The tutorial will be split into two parts, the first part of flash and the second of the release


1ST PART
Flashing Procedure


Setool run the program, and gained access to the support. Support the model we access the R7EA011 folder and downloaded the following files:

R7EA011.APP_SW_1239_0125_GENERIC_HO_REDBROWNBLUE_C ID81_80_53_52_49_DB3350.SOFTWARE
R7EA011.FS_AMERICA_HO_REDBROWNBLUE_CID81_80_53_52_ 49.SOFTWARE


Once already have downloaded on our PC, select the model and identify our model




Let Setting and activate the following options:





We returned to the SEMC A2 tab and load our 2 files with ADD and we click on flash to start flashing process





We press the C key on the phone (I must be off) and connect the phone (as we will start flashing the phone)








We hope to finish flashing and turn on, as q is the first time works after flash the phone will get a bar indicating that it is loading the software on the phone


Continued on the following message

[ruroni925]

PART 2

Release Procedure


Once the phone is in our version we drove to the correct setting and activate the following signed mode and put our user and pass with credits





Then we drove to the BYPASS J108 tab and we click the first option UPLOAD EXECUTOR PACKAGE





With the phone off the C key pressed and connect the USB cable





The first process started





When this process ends, put the white chip or test card on the phone, put the microsd memory on the phone and turn on (When turning on the phone, the display will tell us which applications are installed, wait for the phone switch completely)

Once you are done completely turn off.

Now we are ready for the 2nd step, we click the button UPLOAD EXECUTOR EXTRACTOR, connect the phone to USB cable is off by pressing C








When you complete this step automatically open a folder containing the backup of our phone, not close this folder.

Now turn on the phone (On the phone screen installing applications, we hope to complete the installation) put the phone in memory mode and connect the phone on to the pc (the pc we detected the phone as if it were a memory, now exploring memory inside the folder and look inside OTHER and the file will be EXECUTOR.B

[ruroni925]

Copy this file




When tey replace it in the folder that is opened automatically (the folder name is our phone imei and is located in the backup folder where you are our version of setool)

Finally we have the two files in the same folder





Now we're ready for step 3, we click the button UNLOCK PHONE connect the phone that is off, the USB cable and pressing the C key to initiate the process





When you reach this part, turn the phone off and on, set the phone as PC Suite or modem (remember what we had previously set to mass storage mode or memory stick)





Once you connect the phone, the program will begin to recognize (if they have the pc starts to ask drivers, this driver can be located at v1.1286 \ drivers \ Modem_Drivers)





The process will continue and we hope to complete the process





Once you finish the process VERY IMPORTANT. DO NOT DISCONNECT THE PHONE, YOU SHOULD EXPECT TO BE STARTED ONLY

Once we turn on the phone just released successfully


regards

P. S.
Any questions post it here

[foolish23]

with a minimum of 3 credits how many will deducted?

[mcj1711]

job well done bro.....

[fawad85]

long journey to unlock j108 phone unlock.

[bhobz]

long process and 3 credits cost for that long procedure. thats stupid.

[rico_deep]

Originally Posted by bhobz

long process and 3 credits cost for that long procedure. thats stupid.

Find other tools that unlock J108i...........then....


Post it here.......



stupid......

[shahid41]

J 108 unlock ok by setool

CFG:100000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081

OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01261100267285 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM75
PHONE READY TO PROCEED
EXECUTOR STARTED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM75
PHONE READY TO PROCEED.
GOT SEED: 00B131D3
ACTIVATION COMPLETED. USERCODE RESET TO "0000"
DO NOT DISCONNECT PHONE FROM CABLE
UNTIL PHONE TURNS ON BY ITSELF
Elapsed: 102 secs.

[haroon454]

good post nice........................

[saker2050]

Thank you good information

[SALES121]

Thank you.
Very Nice Tutorial.

Br.
Welcome To sales121.net - #1 Server for End Users and Resellers Welcome - Home

[javidpk]

thanks bro good information

[unlock in nepal]

IF not work se tool test card we nead orgina sim card with come with phone


Thanks working salution sir



now my mobile is unlocked by this stape

[pak555]

OMG MY J108i UNLOCKED YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS AFTER LONG TIME!!!