..::: USB Driver Upgrade from GUi v60 Release Read Here :::.. - Page 2 - GSM-Forum

saif@cellplus · 02-14-2010, 05:46

Quote:

Originally Posted by Rashky

what is this
RUNNING v0.915060/UNI
CARD SERIAL 000xxxxx
PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

i've already install the driver ggsetup-2.2.0.6

just identify any phone through USB, it will ok..

BR,
Saif.

atiq022 · 02-14-2010, 12:45

what is the difference between cable dcu 60 and dcu 65 plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz explain

kucin · 02-14-2010, 16:29

Mr. Laser what about this update!
When i Connect phone with C or 2+5 My pc detect "flash device" and HANG!
I try to instal: ggsetup-2.2.0.6.exe and before ggsetup-2.2.0.5.exe- but it didn`t help me!
Firstly when i want to open SETool i had seen error with missing in ddl file, but i download from 3 other links- now i CAN START this program, i`m using KIS 9- I`m add Exception exclusion from Scan in KIS but it didnt work for me.

I do everything what you wrote in this post:
http://forum.gsmhosting.com/vbb/show...98&postcount=4

In this moment i can connect any SE phone- PC come to hang and SETool won`t start (*60 version, older *59 working fine)

Please help me

Best Regards
Adrian

bestin · 02-15-2010, 01:13

Here all included just install and run,,,,,,

V0.915060 all included

http://www.4shared.com/file/22079910...OL0915060.html

ernz · 02-15-2010, 03:24

Quote:

Originally Posted by Rashky

what is this
RUNNING v0.915060/UNI
CARD SERIAL 000xxxxx
PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

i've already install the driver ggsetup-2.2.0.6

ive got the same error too........even i connect phone to pC,it can identify but still gives this message" PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00"

i restarted my pc but when i connect phone to my Pc and identify it, it gives that error....

ROEZT · 02-15-2010, 05:05

sir my pc blue screen what happenned....

>>.123.<< · 02-15-2010, 06:37

Quote:

Originally Posted by Amir-SkillZ

Hello,

Starting from GUI V60 of Setool ... User Needed to remove Old Setup of Drivers From PC In Order to Avoaid USB Driver Upgrade Error
When New Setup from Below Link will be launched Old Drivers will be checked and Asked for Removal Kindly Do So in Order to Proceed

Install New Gordon Gate Drivers From Your DIST Arhcive
v0.915060\drivers\USBFlash_driver\ggsetup-2.2.0.6.exe
Now connect any Phone to PC holding C Drivers will be Reasked and Got Upgraded Now Reopen SEtool u will see new Driver version Installed Ready.

if setool2 software complains for missing .dll file, please either reload version from support area or rapidshare link or extract attached file into setool2g.exe directory.

Thankx for Your Time ..

sir i install ggsetup-2.2.0.6 but . see this error PLEASE UPGRADE USBFLASH DRIVER 01.01.00.0C

>>.123.<< · 02-15-2010, 07:09

Quote:

Originally Posted by bestin

Here all included just install and run,,,,,,

V0.915060 all included

http://www.4shared.com/file/22079910...OL0915060.html

i install not work PLEASE UPGRADE USBFLASH DRIVER 01.01.00.0C

lahdache · 02-15-2010, 07:50

thank's .

like this :

RUNNING v0.915060/UNI
CARD SERIAL : lahdache
USBFLASH DRIVER VERSION 02.02.00.05
CFG:000000000000
ChipID

000,EMP protocol:0301.
-------
lahdache

>>.123.<< · 02-15-2010, 07:55

Quote:

Originally Posted by lahdache

thank's .

like this :

RUNNING v0.915060/UNI
CARD SERIAL : lahdache
USBFLASH DRIVER VERSION 02.02.00.05
CFG:000000000000
ChipID

000,EMP protocol:0301.
-------
lahdache

yes
yes
...............

vmin81 · 02-15-2010, 08:58

i have same errorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

RUNNING v0.915060/UNI
CARD SERIAL 0000xxxx
PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

lahdache · 02-15-2010, 09:14

Quote:

Originally Posted by vmin81

i have same errorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

RUNNING v0.915060/UNI
CARD SERIAL 0000xxxx
PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

-------------

100/100

1- extract V0.915060 in setool folder

2- go to /

c:/ program file \setool / drivers\USBFlash_driver\ggsetup-2.2.0.6.exe

and Install Drivers.

3- open soft

4- connect any phone to and enjoy.
--------
lahdache

vmin81 · 02-15-2010, 09:20

Quote:

Originally Posted by lahdache

-------------

100/100

1- extract V0.915060 in setool folder

2- go to /

c:/ program file \setool / drivers\USBFlash_driver\ggsetup-2.2.0.6.exe

and Install Drivers.

3- open soft

4- connect any phone to and enjoy.
--------
lahdache

i do it bro but the still the message found

>>.123.<< · 02-15-2010, 10:09

just past / system32
http://forum.gsmhosting.com/vbb/atta...8&d=1266057741
its ok i test 100% ok

tanveerriaz · 02-16-2010, 14:14

i have sam problem
i uninstall old driver and install new but sam

RUNNING v0.915060/UNI
CARD SERIAL 0012xxx
PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

02-15-2010, 07:50	#24 (permalink)
lahdache No Life Poster Join Date: Jul 2008 Location: H.DALAA Age: 48 Posts: 2,040 Member: 820444 Status: Offline Sonork: 100.1680641 Thanks Meter: 466	thank's . like this : RUNNING v0.915060/UNI CARD SERIAL : lahdache USBFLASH DRIVER VERSION 02.02.00.05 CFG:000000000000 ChipID000,EMP protocol:0301. ------- lahdache

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
...:::All Sharp USB Driver Here...:::	BURHANLAHERI	Sharp	4	04-22-2011 17:07
...::: P2K Easy Tool v5.3 - full flash read/write :::...	zulea	Motorola P2K (USB-Smart)	19	07-17-2006 22:31

02-14-2010, 12:45	#17 (permalink)
atiq022 No Life Poster Join Date: Sep 2007 Location: morocco Posts: 587 Member: 587405 Status: Offline Sonork: 100.1681610 Thanks Meter: 151	what is the difference between cable dcu 60 and dcu 65 plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz explain

02-14-2010, 16:29	#18 (permalink)
kucin Insane Poster Join Date: Oct 2008 Location: UK Posts: 81 Member: 879095 Status: Offline Thanks Meter: 2	Mr. Laser what about this update! When i Connect phone with C or 2+5 My pc detect "flash device" and HANG! I try to instal: ggsetup-2.2.0.6.exe and before ggsetup-2.2.0.5.exe- but it didn`t help me! Firstly when i want to open SETool i had seen error with missing in ddl file, but i download from 3 other links- now i CAN START this program, i`m using KIS 9- I`m add Exception exclusion from Scan in KIS but it didnt work for me. I do everything what you wrote in this post: http://forum.gsmhosting.com/vbb/show...98&postcount=4 In this moment i can connect any SE phone- PC come to hang and SETool won`t start (60 version, older 59 working fine) Please help me Best Regards Adrian

02-15-2010, 01:13	#19 (permalink)
bestin Banned Join Date: Jul 2009 Posts: 542 Member: 1071056 Status: Offline Thanks Meter: 897	Here all included just install and run,,,,,, V0.915060 all included http://www.4shared.com/file/22079910...OL0915060.html

02-15-2010, 05:05	#21 (permalink)
ROEZT No Life Poster Join Date: May 2007 Location: Badui My home Posts: 531 Member: 508048 Status: Offline Thanks Meter: 123	sir my pc blue screen what happenned....

02-15-2010, 08:58	#26 (permalink)
vmin81 No Life Poster Join Date: Jul 2006 Location: Follow Me If U Can Posts: 2,821 Member: 304251 Status: Offline Thanks Meter: 789	i have same errorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr RUNNING v0.915060/UNI CARD SERIAL 0000xxxx PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00

02-15-2010, 10:09	#29 (permalink)
>>.123.<< Banned Join Date: Sep 2009 Location: PM P L Z Age: 36 Posts: 1,296 Member: 1116719 Status: Offline Thanks Meter: 542	just past / system32 http://forum.gsmhosting.com/vbb/atta...8&d=1266057741 its ok i test 100% ok

02-16-2010, 14:14	#30 (permalink)
tanveerriaz Freak Poster Join Date: Nov 2001 Location: Pakistan Age: 54 Posts: 129 Member: 7248 Status: Offline Thanks Meter: 10	i have sam problem i uninstall old driver and install new but sam RUNNING v0.915060/UNI CARD SERIAL 0012xxx PLEASE UPGRADE USBFLASH DRIVER 00.00.00.00