X10 dead phone repair - GSM-Forum

bcnboy · 09-13-2010, 18:34

got 1 x10 xperia some time it blinks red and some time it shows green light, cannot update with official se updater and also cannot flash with setool.
here is the flashing error log

RUNNING v 1.085/UNI
CARD SERIAL 000277xx
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 57 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 19 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...

EROM "R8A013" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"

PHONE IMEI:35941903122xxxxx
writing "D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760.rar"
Processing package
D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760.rar

damaged package
Break.
Elapsed: 9 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 5 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...
PROCEDURE WAS STOPPED BY USER
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 7 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...

EROM "R8A013" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FATAL ERROR " (Hashblock_verification_failed)" IN "SECURITY_CLASS"
error while uploading DATA block
LOADER NOT STARTED
FAILED TO SETUP PHONE
Elapsed: 6 secs.

any suggestions

bcnboy

:Aishur: · 09-13-2010, 18:45

1 unrar X10i_CUSTO_IBE_GENERIC_1238 _3760.rar ( 2 files are inside)
2 add the two files to firmware area (i prefer the small size file first)
3 settings signed mode ONLY and press flash
4 that is all

Example
http://forum.gsmhosting.com/vbb/f473...hange-1082920/

bcnboy · 09-13-2010, 19:07

ok tried as you mentioned here is the log

RUNNING v 1.085/UNI
CARD SERIAL 000277xx
USBFLASH DRIVER VERSION 02.02.00.05
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...

EROM "R8A013" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"

PHONE IMEI:35941903122282
writing "D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760\R2A_R1FA016_FSP_X10i_CUSTO_IBE_GENERIC_1238_ 3760_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE. sin_file_set"
Processing package
D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760\R2A_R1FA016_FSP_X10i_CUSTO_IBE_GENERIC_1238_ 3760_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE. sin_file_set

Processing ACPU files
PROCESSING: system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin
error while uploading DATA block
Break.
Elapsed: 139 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON...

EROM "R8A013" AID: 0001
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"

PHONE IMEI:35941903122xxx
writing "D:\mobile soft\setool2\flash\X10\X10i_VFE_ES_VFE_1234_6163\R 20A_R2BA024_FSP_X10i_VFE_ES_VFE_1234_6163_S1_SW_LI VE_AC12_0001_S1_PARTITION_WITH_SPARE.sin_file_set"
Processing package
D:\mobile soft\setool2\flash\X10\X10i_VFE_ES_VFE_1234_6163\R 20A_R2BA024_FSP_X10i_VFE_ES_VFE_1234_6163_S1_SW_LI VE_AC12_0001_S1_PARTITION_WITH_SPARE.sin_file_set

Processing ACPU files
PROCESSING: system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin
can't get S1 command header
error while uploading DATA block
Break.
Elapsed: 311 secs.

any suggestions

bcnboy

:Aishur: · 09-13-2010, 19:42

suggestions:
Update setool (1.089)
use a good cable ( nokia 5310xm)
use a full charged battery

bvm21 · 08-22-2011, 15:35

suggestions:
Update setool (1.089)
use a good cable ( nokia 5310xm)
use a full charged battery
all trying ///no result
any ideas???

anujc143 · 11-01-2016, 05:50

Quote:

Originally Posted by :Aishur:

suggestions:
Update setool (1.089)
use a good cable ( nokia 5310xm)
use a full charged battery

thanks using 5130 nokia cable problem solveed ...

09-13-2010, 18:34	#1 (permalink)
bcnboy No Life Poster Join Date: May 2002 Location: Spain Age: 54 Posts: 782 Member: 12126 Status: Offline Sonork: 1575463 Thanks Meter: 199	X10 dead phone repair got 1 x10 xperia some time it blinks red and some time it shows green light, cannot update with official se updater and also cannot flash with setool. here is the flashing error log RUNNING v 1.085/UNI CARD SERIAL 000277xx USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... PROCEDURE WAS STOPPED BY USER supported phone was not detected FAILED TO SETUP PHONE Elapsed: 57 secs. SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... PROCEDURE WAS STOPPED BY USER supported phone was not detected FAILED TO SETUP PHONE Elapsed: 19 secs. SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... EROM "R8A013" AID: 0001 SOFTWARE AID: 0001 LOADER AID: 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A024" PHONE IMEI:35941903122xxxxx writing "D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760.rar" Processing package D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760.rar damaged package Break. Elapsed: 9 secs. SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... PROCEDURE WAS STOPPED BY USER supported phone was not detected FAILED TO SETUP PHONE Elapsed: 5 secs. SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... PROCEDURE WAS STOPPED BY USER supported phone was not detected FAILED TO SETUP PHONE Elapsed: 7 secs. SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... EROM "R8A013" AID: 0001 SOFTWARE AID: 0001 LOADER AID: 0001 FATAL ERROR " (Hashblock_verification_failed)" IN "SECURITY_CLASS" error while uploading DATA block LOADER NOT STARTED FAILED TO SETUP PHONE Elapsed: 6 secs. any suggestions bcnboy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Phone Stuff for FREE & KEy-GEn For Logo Editor !	BoNtEk - ThA WtC MeMbA	Nokia Multimedia	8	10-31-2012 20:17
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52

09-13-2010, 18:45	#2 (permalink)
:Aishur: No Life Poster Join Date: Jun 2010 Age: 14 Posts: 2,864 Member: 1315677 Status: Offline Thanks Meter: 1,439	1 unrar X10i_CUSTO_IBE_GENERIC_1238 _3760.rar ( 2 files are inside) 2 add the two files to firmware area (i prefer the small size file first) 3 settings signed mode ONLY and press flash 4 that is all Example http://forum.gsmhosting.com/vbb/f473...hange-1082920/

09-13-2010, 19:07	#3 (permalink)
bcnboy No Life Poster Join Date: May 2002 Location: Spain Age: 54 Posts: 782 Member: 12126 Status: Offline Sonork: 1575463 Thanks Meter: 199	ok tried as you mentioned here is the log RUNNING v 1.085/UNI CARD SERIAL 000277xx USBFLASH DRIVER VERSION 02.02.00.05 SIGNED MODE (USING SERVER) CFG:100000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... EROM "R8A013" AID: 0001 SOFTWARE AID: 0001 LOADER AID: 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A024" PHONE IMEI:35941903122282 writing "D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760\R2A_R1FA016_FSP_X10i_CUSTO_IBE_GENERIC_1238_ 3760_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE. sin_file_set" Processing package D:\mobile soft\setool2\flash\X10\X10i_CUSTO_IBE_GENERIC_1238 _3760\R2A_R1FA016_FSP_X10i_CUSTO_IBE_GENERIC_1238_ 3760_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE. sin_file_set Processing ACPU files PROCESSING: system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin error while uploading DATA block Break. Elapsed: 139 secs. SIGNED MODE (USING SERVER) CFG:100000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" BUTTON... EROM "R8A013" AID: 0001 SOFTWARE AID: 0001 LOADER AID: 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A024" PHONE IMEI:35941903122xxx writing "D:\mobile soft\setool2\flash\X10\X10i_VFE_ES_VFE_1234_6163\R 20A_R2BA024_FSP_X10i_VFE_ES_VFE_1234_6163_S1_SW_LI VE_AC12_0001_S1_PARTITION_WITH_SPARE.sin_file_set" Processing package D:\mobile soft\setool2\flash\X10\X10i_VFE_ES_VFE_1234_6163\R 20A_R2BA024_FSP_X10i_VFE_ES_VFE_1234_6163_S1_SW_LI VE_AC12_0001_S1_PARTITION_WITH_SPARE.sin_file_set Processing ACPU files PROCESSING: system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin can't get S1 command header error while uploading DATA block Break. Elapsed: 311 secs. any suggestions bcnboy

09-13-2010, 19:42	#4 (permalink)
:Aishur: No Life Poster Join Date: Jun 2010 Age: 14 Posts: 2,864 Member: 1315677 Status: Offline Thanks Meter: 1,439	suggestions: Update setool (1.089) use a good cable ( nokia 5310xm) use a full charged battery

08-22-2011, 15:35	#5 (permalink)
bvm21 Major Poster Join Date: Mar 2011 Posts: 49 Member: 1534555 Status: Offline Thanks Meter: 1	suggestions: Update setool (1.089) use a good cable ( nokia 5310xm) use a full charged battery all trying ///no result any ideas???