MSSBox Present New mss.card - GSM-Forum

Gabiunlock · 12-13-2010, 14:08

Dear customers,

Introducing mss.card - a new product from MSS Box II producers!

What is mss.card? Why we have developed it?

MSS Box II was developed more than 5 years ago, since then mobile
phones evolved to very complicated devices, requiring high speed
operation and modern solutions, which are not always possible to achieve with MSS Box II.

mss.card is a logical extension of the MSS Box II project. All further updates for MSS Box II
Requiring high speed operation can be used with mss.card only, as
the box cannot provide the necessary speed.

To achieve this, we have developed special software for mss.card, which is:

* Ultraflasher 2.0 - this is a new version of UltraFlasher for MSS Box II, but for mss.card.
It can flash all modern Motorola phones on Android platforms, like Milestone, XT7xx, MB5xx,
MB3xx and much more.
We have also prepared a big database of flash files.

It doesn\'t mean that MSS Box II is useless now. All further updates
requiring high security will be released under MSS Box II, to
provide better protection from stealing & copying by our competitors.

And now a small present for all our customers! FREE LG software for every mss.card owner:

The following modules are supported for mss.card now:

* LG Module - ultimate LG service tool for all LG phones, based on SE,
Qualcomm, MTK, Analog Devices, Infineon and Texas Insruments chipsets.
It can flash, unlock, repair and much more.
Please find a complete description of this module at:
msscard.com

Are there any discounts and special offers for MSS Box II owners?

- OFCOURSE! We value you as a customer that is why we have a
special price for you: 50 USD per card.
* please note, that you can buy 1 card for each MSS Box II only.
Tell your dealer your MSS Box II ID and get a special discounted price.

Where can I find more information?

- More information is available at msscard.com and on our
official forum at msscard.com • Index page

Always yours,
mss.card team
[email protected]
msscard.com

Features

LG Multiplatform Module features
LG Multiplatform Module screenshots

Full support for LG platforms:
* Infineon
* MTK
* Texas Instruments
* Analog Devices
* SEMC
* Qualcomm

Main features:
- Dump full flash
- Dump firmware
- Dump NVM
- Dump file system
- Flash full flash
- Flash firmware
- Flash NVM
- Flash file system
- Direct unlock
- Unlock IMEI
- Lock IMEI
- Patch / Repair / Change IMEI
- Format FS (File System)

Interfaces supported:
- Native COM port
- USB to serial COM port emulation
- Native USB

Supported models:

B-series: B2000, B2050, B2060, B2070, B2100, B2150, BL20, BL20e, BL20v, BL40, BL40e, BL40f, BL40g, BL42k
C-series: C1100, C1150, C1200, C1300, C1300i, C1400, C1500, C2200, C3100, C3300, C3310, C3320, C3380, C3400, CB360, CF360, CF360GO, CF750, CG180, CG225, CP150, CT810, CT815, CU400, CU405, CU500, CU500v, CU515, CU575, CU720, CU915, CU920
F-series: F2100, F2300, F2400, F2410, F3000, F7100
G-series: G1600, G1610, G3000, G3100, G4010, G4015, G4050, G5300, G5300i, G5400, G5500, G7000, G7030, G7050, G7100, G7110, G7120, GB100, GB101, GB102, GB105, GB106, GB107, GB108, GB109, GB110, GB115, GB125, GB126, GB130, GB170, GB175, GB190, GB190a, GB190b, GB195, GB210, GB220, GB220go, GB220N, GB230, GB250, GB250f, GB250g, GB255, GB258, GC900, GC900e, GC900f, GD330, GD335, GD580, GD710, GD880, GD880f, GD880G, GD900, GM310, GM310F, GM310G, GM630, GM730, GM730e, GM730f, GM735, GM750, GM750h, GM750n, GR500, GR500F, GR500FD, GR500R, GR501, GS190, GS200, GT360, GT365, GT400, GT400GO, GT405, GT500, GT500N, GT505, GT540, GT540f, GT540GO, GT810, GT950, GU280, GU280f, GU282, GU285, GU285f, GU285g, GW300, GW520, GW525, GW620, GW620, GW620f, GW620G, GW620GO, GW620R, GW820, GW825
H-series: HB620, HB620T
K-series: KB620, KB770, KB775F, KC550, KC560, KC780, KC910, KC910Q, KC910Qa, KE260, KE360, KE500, KE508, KE520, KE590, KE600, KE608, KE770, KE800, KE820, KE850, KE858, KE970, KE990, KE990d, KE998, KF310, KF311, KF350, KF390, KF390GO, KF390Q, KF510, KF600, KF690, KF700, KF700Q, KF701, KF750, KF755, KF757, KF758, KF900, KG110, KG115, KG118, KG119, KG120, KG130, KG210, KG220, KG221, KG225, KG228, KG240, KG245, KG270, KG271, KG275, KG276, KG278, KG280, KG285, KG288, KG289, KG290, KG291, KG296, KG320, KG320s, KG328, KG370, KG375, KG376, KG70, KG77, KG800, KG90, KG90n, KG90n, KH1200, KH1600, KH1800, KH1800M, KH2100, KH2200, KH2700, KH4500, KH6400, KH6500, KM380, KM385, KM386, KM500, KM501, KM710, KM710c, KM710d, KM900, KM900e, KM900f, KM900g, KP100, KP105, KP106, KP107, KP108, KP109, KP110, KP115, KP130, KP135, KP150, KP151, KP152, KP152q, KP170, KP175, KP200, KP202, KP202i, KP210, KP215, KP230, KP233, KP235, KP260, KP265, KP270, KP275, KP293, KP500, KP501, KP502, KP550, KP570, KP570q, KS20, KS360, KS500, KS6601, KS6602, KT520, KT525, KT610, KT615, KU1700, KU250, KU310, KU311, KU380, KU385, KU450, KU580, KU6000, KU800, KU830, KU9100, KU950, KU970, KU990, KU990c, KU990GO, KU990i, KU990iG, KU990MF, KU990R
L-series: L01A, L01B, L02B, L03A, L03B, L04A, L06A, L1100, L1150, L1400, L3100, L341i, L342i, L600i, L600V, L601i, L602i, L704i, L705i, L705iX, L706ie, L852i, LG300G, LG410g, LG600, LG800
M-series: M6100, ME550, ME770, ME850, ME970, MG100, MG101, MG105, MG110b, MG120, MG125, MG130, MG150, MG155, MG160, MG161, MG165, MG230d, MG235c, MG280, MG295, MG296, MG320, MG370, MG377, MG610, MG800, MG808, MS20, MS25, MU500, MU515
P-series: P7200
S-series: S5000, S5100, S5200, SH130, SH170, SH210, SH240, SH460, SH470, SH640, SH650, SU100, SU600, SU910
T-series: TE360, TE365, TE365F, TG800, TU500, TU515, TU720, TU750, TU915
U-series: U250, U300, U300C, U310, U310C, U370, U370C, U370W, U450, U450C, U8120, U8130, U8150, U8180, U8200, U8210, U8290, U830, U8330, U8360, U8380, U880, U890, U900, U970, U990
W-series: W3000, W5300, W7000, W7020, W7100

Screenshots:

Br
Gabiunlock

danrachita · 12-13-2010, 14:48

Thank you MSS Team this is really a big suprise.
Thank you for your work.
BR.

fred · 12-13-2010, 15:23

@Gabiunlock

what if we dont own mssII box.. and want to purchase only mss.card is it possible to use this card only without mssII box??

br
freddy
gsmph

rafo23 · 12-13-2010, 19:49

does not appear, their work should be only motorola
work on it and not "LG?

freedomqn · 12-13-2010, 21:24

motorola dead and need other works

snakebreeder · 12-14-2010, 03:43

ultraflasher can not flash m702is and m702ig i have already tested and posted on your forum but nobody answers

mss ODM
cannot even unlock C139 from cingular

mss p2ktool 1.28 cannot flash E6 and E680i

software says "unsupported" or new phone..

you need to improve the other features before focusing on new and other features!

also your support site is ****.. we can't log in unless the box is connected to PC...

how can we discuss functions of mss if we can't get in there with out box.. we HAVE TO STOP process first or disconnect mss1.28 or odm software before our card can be detected by the support forum you provided..

which by the way has no reply the support forum has no open discussion or active threads because you are applyinbg too much security..

even here at gsmhosting.. the mss support area is like a desert! no one is helping anyone! no product supporter active!

can you see how many people here in your AREA are having DEAD V3re? how come?

you should understand that not all BUYERS of your boxes are already professionals!

that's why you should give some time to answer and guide new users of your box

not even a detailed thread about performing testpoint and other operation

have you tried flashing "BOOT" of p2k series?

yes you have those files in your support.. but mss 1.28 "does not support and recognize" the bootfiles on your download section... TRY IT!

there are no tabs on your GUi that says "write boot"

try on "FLASH" but it does not see the boot files from your support download..

i have read your FAQ's don't get me wrong... i am a good READER...

the only flashfiles and boot files i could use are those i "read and backed up" from other phones...

please make the necessary adjustments first...

VALUE YOUR CUSTOMERS just as you have said....... i bought your box because i'm tired of using adapters and power supply for smartclips... it takes so much time...

but later i am starting to realize... smartclips is way better so i am going back ..

you were always claiming that you have "fast unlock" yes indeed.. but you have very limited versions of supported phones and processes..

can you imaging you support unlock of motorola V8 but your GUI does not recognize V8 boot .. you cannot even make a back up from V8 before unlocking.. although i have unlocked a few of these.. there is still much risks..

because what if it dies? there is also no way to flash this with mss box because your precious GUI can not even read or support its ID

i have desperately tried to get into synch with mss.. i always try to use this to master it's use to the fullest of it's ability/capabilities... for almost a year now have tried

have you tried unlocking motorola z6 with your box?

i have! but it fails.. but with my smartclip everything went well..

FIRST:
PLEASE DO IMPROVE THINGS.. PLEASE READ THE PROBLEMS POSTED HERE IN YOUR AREA/SECTION
EVEN IN THE SUPPORT YOUR PROVIDED .

THEN YOU CAN FOCUS ON ADD-ONS

br

Celltronixz · 12-14-2010, 04:04

it's a great work!!! thank you mss! what a big surprise!!

windman8 · 12-14-2010, 04:18

sometimes mssbox is fail but me almost perpect?i unlock c139 formatt ffs?unloking v3re via testpoint ok?but we to thanks for this new added software ?not only mssbox can flash mottorolla?scout, amartclip many choices SW?

byteforce · 12-14-2010, 04:36

Where is LG U400 SEMC platform support? With this model I see that you offer nothing new in this field!!!

snakebreeder · 12-14-2010, 05:02

kinakatakutan · 12-14-2010, 05:28

mssbox 2 - 80% negative feedback..

evasoft · 12-14-2010, 05:46

Quote:

Originally Posted by snakebreeder

unsoported phone=tp

boot write= restore tab (see boot and flash have diferent extensions)

w220 dont conect= see production week on phone label "u2" vercion not suported beacause uart is disabled.

Dead v3re= unlock again and soft auto restore backup.

Support files= all files work fine. You are the problem.

Z6 unlock= work fine, tested 100000% (whats your problem?)

c139 cingular unlock= format ffs

conect box for support=because support is for box owners not for sundays:d

i am good reader= its a joke?

Mss is the easier moto box almost dont need instructions

bye

evasoft · 12-14-2010, 05:55

Quote:

Originally Posted by snakebreeder

check again, .

snakebreeder · 12-14-2010, 17:31

Quote:

Originally Posted by evasoft

unsoported phone=tp

boot write= restore tab (see boot and flash have diferent extensions)

w220 dont conect= see production week on phone label "u2" vercion not suported beacause uart is disabled.

Dead v3re= unlock again and soft auto restore backup.

Support files= all files work fine. You are the problem.

Z6 unlock= work fine, tested 100000% (whats your problem?)

c139 cingular unlock= format ffs

conect box for support=because support is for box owners not for sundays:d

i am good reader= its a joke?

Mss is the easier moto box almost dont need instructions

bye

ok i got your point... yes i am a good reader and my comprehension is wide and my grammar and understanding is also beyond your expectation...

you should understand i am not starting a fight whatsoever.. i am simply asking for a more active support.. like these
http://forum.gsmhosting.com/vbb/f474...image-1145289/
http://forum.gsmhosting.com/vbb/f474...-here-1145290/
http://forum.gsmhosting.com/vbb/f474...uides-1150752/
http://forum.gsmhosting.com/vbb/f474...users-1145297/
http://forum.gsmhosting.com/vbb/f474...-here-1145305/
http://forum.gsmhosting.com/vbb/f474...-here-1145295/

i could even apply for that if you grant me

yes i agree mss is fast and easy to use.. problem is some bugs need some fix but no one seems to pay attention..
like this one for example.. motorola E680i.. i tried to flash with mss but MSS gui itself says that PHONE NOT RECOGNIZED... so who has the problem in this instance? was it me or mss?
TRY IT personally on a handset before you say that i am the problem
http://forum.gsmhosting.com/vbb/f166...ashed-1145502/

TRY to dwonload boot files from support area.. then try to "flash" it to the phone... then you can say that it is all working..

please try it first before you say that it is all working.

i have tried it all also on FOUR pc's and three laptops..

i would not say such a thing if i haven't tested it..

with all due respect... try it first before you comment

and please provide GUIDES here in your section.. not just inside the mss forum as no one is really active insidde that forum...

i have a few post there that is actually more than a month old but no one ever replies there... what if in most cases the answers are needed asap.?

br

snakebreeder · 12-14-2010, 17:45

Quote:

Originally Posted by evasoft

unsoported phone=tp

boot write= restore tab (see boot and flash have diferent extensions)

w220 dont conect= see production week on phone label "u2" vercion not suported beacause uart is disabled.

Dead v3re= unlock again and soft auto restore backup.

Support files= all files work fine. You are the problem.

Z6 unlock= work fine, tested 100000% (whats your problem?)

c139 cingular unlock= format ffs

conect box for support=because support is for box owners not for sundays:d

i am good reader= its a joke?

Mss is the easier moto box almost dont need instructions

bye

and like i said...

NOT ALL OF THe people are already profesional.. so they need your fast and active support and replies.... that's all

peace

12-13-2010, 14:08	#1 (permalink)
Gabiunlock No Life Poster Join Date: Feb 2008 Location: Misiones Posts: 1,197 Member: 710759 Status: Offline Sonork: No Thanks Meter: 329	MSSBox Present New mss.card Dear customers, Introducing mss.card - a new product from MSS Box II producers! What is mss.card? Why we have developed it? MSS Box II was developed more than 5 years ago, since then mobile phones evolved to very complicated devices, requiring high speed operation and modern solutions, which are not always possible to achieve with MSS Box II. mss.card is a logical extension of the MSS Box II project. All further updates for MSS Box II Requiring high speed operation can be used with mss.card only, as the box cannot provide the necessary speed. To achieve this, we have developed special software for mss.card, which is: * Ultraflasher 2.0 - this is a new version of UltraFlasher for MSS Box II, but for mss.card. It can flash all modern Motorola phones on Android platforms, like Milestone, XT7xx, MB5xx, MB3xx and much more. We have also prepared a big database of flash files. It doesn\'t mean that MSS Box II is useless now. All further updates requiring high security will be released under MSS Box II, to provide better protection from stealing & copying by our competitors. And now a small present for all our customers! FREE LG software for every mss.card owner: The following modules are supported for mss.card now: * LG Module - ultimate LG service tool for all LG phones, based on SE, Qualcomm, MTK, Analog Devices, Infineon and Texas Insruments chipsets. It can flash, unlock, repair and much more. Please find a complete description of this module at: msscard.com Are there any discounts and special offers for MSS Box II owners? - OFCOURSE! We value you as a customer that is why we have a special price for you: 50 USD per card. * please note, that you can buy 1 card for each MSS Box II only. Tell your dealer your MSS Box II ID and get a special discounted price. Where can I find more information? - More information is available at msscard.com and on our official forum at msscard.com • Index page Always yours, mss.card team [email protected] msscard.com Features LG Multiplatform Module features LG Multiplatform Module screenshots Full support for LG platforms: * Infineon * MTK * Texas Instruments * Analog Devices * SEMC * Qualcomm Main features: - Dump full flash - Dump firmware - Dump NVM - Dump file system - Flash full flash - Flash firmware - Flash NVM - Flash file system - Direct unlock - Unlock IMEI - Lock IMEI - Patch / Repair / Change IMEI - Format FS (File System) Interfaces supported: - Native COM port - USB to serial COM port emulation - Native USB Supported models: B-series: B2000, B2050, B2060, B2070, B2100, B2150, BL20, BL20e, BL20v, BL40, BL40e, BL40f, BL40g, BL42k C-series: C1100, C1150, C1200, C1300, C1300i, C1400, C1500, C2200, C3100, C3300, C3310, C3320, C3380, C3400, CB360, CF360, CF360GO, CF750, CG180, CG225, CP150, CT810, CT815, CU400, CU405, CU500, CU500v, CU515, CU575, CU720, CU915, CU920 F-series: F2100, F2300, F2400, F2410, F3000, F7100 G-series: G1600, G1610, G3000, G3100, G4010, G4015, G4050, G5300, G5300i, G5400, G5500, G7000, G7030, G7050, G7100, G7110, G7120, GB100, GB101, GB102, GB105, GB106, GB107, GB108, GB109, GB110, GB115, GB125, GB126, GB130, GB170, GB175, GB190, GB190a, GB190b, GB195, GB210, GB220, GB220go, GB220N, GB230, GB250, GB250f, GB250g, GB255, GB258, GC900, GC900e, GC900f, GD330, GD335, GD580, GD710, GD880, GD880f, GD880G, GD900, GM310, GM310F, GM310G, GM630, GM730, GM730e, GM730f, GM735, GM750, GM750h, GM750n, GR500, GR500F, GR500FD, GR500R, GR501, GS190, GS200, GT360, GT365, GT400, GT400GO, GT405, GT500, GT500N, GT505, GT540, GT540f, GT540GO, GT810, GT950, GU280, GU280f, GU282, GU285, GU285f, GU285g, GW300, GW520, GW525, GW620, GW620, GW620f, GW620G, GW620GO, GW620R, GW820, GW825 H-series: HB620, HB620T K-series: KB620, KB770, KB775F, KC550, KC560, KC780, KC910, KC910Q, KC910Qa, KE260, KE360, KE500, KE508, KE520, KE590, KE600, KE608, KE770, KE800, KE820, KE850, KE858, KE970, KE990, KE990d, KE998, KF310, KF311, KF350, KF390, KF390GO, KF390Q, KF510, KF600, KF690, KF700, KF700Q, KF701, KF750, KF755, KF757, KF758, KF900, KG110, KG115, KG118, KG119, KG120, KG130, KG210, KG220, KG221, KG225, KG228, KG240, KG245, KG270, KG271, KG275, KG276, KG278, KG280, KG285, KG288, KG289, KG290, KG291, KG296, KG320, KG320s, KG328, KG370, KG375, KG376, KG70, KG77, KG800, KG90, KG90n, KG90n, KH1200, KH1600, KH1800, KH1800M, KH2100, KH2200, KH2700, KH4500, KH6400, KH6500, KM380, KM385, KM386, KM500, KM501, KM710, KM710c, KM710d, KM900, KM900e, KM900f, KM900g, KP100, KP105, KP106, KP107, KP108, KP109, KP110, KP115, KP130, KP135, KP150, KP151, KP152, KP152q, KP170, KP175, KP200, KP202, KP202i, KP210, KP215, KP230, KP233, KP235, KP260, KP265, KP270, KP275, KP293, KP500, KP501, KP502, KP550, KP570, KP570q, KS20, KS360, KS500, KS6601, KS6602, KT520, KT525, KT610, KT615, KU1700, KU250, KU310, KU311, KU380, KU385, KU450, KU580, KU6000, KU800, KU830, KU9100, KU950, KU970, KU990, KU990c, KU990GO, KU990i, KU990iG, KU990MF, KU990R L-series: L01A, L01B, L02B, L03A, L03B, L04A, L06A, L1100, L1150, L1400, L3100, L341i, L342i, L600i, L600V, L601i, L602i, L704i, L705i, L705iX, L706ie, L852i, LG300G, LG410g, LG600, LG800 M-series: M6100, ME550, ME770, ME850, ME970, MG100, MG101, MG105, MG110b, MG120, MG125, MG130, MG150, MG155, MG160, MG161, MG165, MG230d, MG235c, MG280, MG295, MG296, MG320, MG370, MG377, MG610, MG800, MG808, MS20, MS25, MU500, MU515 P-series: P7200 S-series: S5000, S5100, S5200, SH130, SH170, SH210, SH240, SH460, SH470, SH640, SH650, SU100, SU600, SU910 T-series: TE360, TE365, TE365F, TG800, TU500, TU515, TU720, TU750, TU915 U-series: U250, U300, U300C, U310, U310C, U370, U370C, U370W, U450, U450C, U8120, U8130, U8150, U8180, U8200, U8210, U8290, U830, U8330, U8360, U8380, U880, U890, U900, U970, U990 W-series: W3000, W5300, W7000, W7020, W7100 Screenshots: Br Gabiunlock

12-13-2010, 19:49	#4 (permalink)
rafo23 Crazy Poster Join Date: Jun 2009 Location: Argentina Age: 40 Posts: 53 Member: 1047400 Status: Offline Sonork: 100.1648290 Thanks Meter: 10	News boot Motorola work´s??????????? does not appear, their work should be only motorola work on it and not "LG?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29

12-13-2010, 14:48	#2 (permalink)
danrachita No Life Poster Join Date: Jan 2007 Location: Romania Posts: 2,446 Member: 428861 Status: Offline Sonork: 100.1619141 Thanks Meter: 1,629	Thank you MSS Team this is really a big suprise. Thank you for your work. BR.

12-13-2010, 15:23	#3 (permalink)
fred No Life Poster Join Date: May 2002 Location: dont ask! Posts: 694 Member: 12411 Status: Offline Sonork: 100.113572 Thanks Meter: 813	@Gabiunlock what if we dont own mssII box.. and want to purchase only mss.card is it possible to use this card only without mssII box?? br freddy gsmph

12-13-2010, 21:24	#5 (permalink)
freedomqn No Life Poster Join Date: Sep 2006 Location: 102 quy nhơn BĐ Age: 14 Posts: 1,097 Member: 347720 Status: Offline Sonork: xxx Thanks Meter: 204	motorola dead and need other works

12-14-2010, 03:43	#6 (permalink)
snakebreeder No Life Poster Join Date: Apr 2008 Location: PILIPINAS Posts: 759 Member: 759375 Status: Offline Sonork: www.GSMPIONEER.com Thanks Meter: 895	ultraflasher can not flash m702is and m702ig i have already tested and posted on your forum but nobody answers mss ODM cannot even unlock C139 from cingular mss p2ktool 1.28 cannot flash E6 and E680i software says "unsupported" or new phone.. you need to improve the other features before focusing on new and other features! also your support site is ****.. we can't log in unless the box is connected to PC... how can we discuss functions of mss if we can't get in there with out box.. we HAVE TO STOP process first or disconnect mss1.28 or odm software before our card can be detected by the support forum you provided.. which by the way has no reply the support forum has no open discussion or active threads because you are applyinbg too much security.. even here at gsmhosting.. the mss support area is like a desert! no one is helping anyone! no product supporter active! can you see how many people here in your AREA are having DEAD V3re? how come? you should understand that not all BUYERS of your boxes are already professionals! that's why you should give some time to answer and guide new users of your box not even a detailed thread about performing testpoint and other operation have you tried flashing "BOOT" of p2k series? yes you have those files in your support.. but mss 1.28 "does not support and recognize" the bootfiles on your download section... TRY IT! there are no tabs on your GUi that says "write boot" try on "FLASH" but it does not see the boot files from your support download.. i have read your FAQ's don't get me wrong... i am a good READER... the only flashfiles and boot files i could use are those i "read and backed up" from other phones... please make the necessary adjustments first... VALUE YOUR CUSTOMERS just as you have said....... i bought your box because i'm tired of using adapters and power supply for smartclips... it takes so much time... but later i am starting to realize... smartclips is way better so i am going back .. you were always claiming that you have "fast unlock" yes indeed.. but you have very limited versions of supported phones and processes.. can you imaging you support unlock of motorola V8 but your GUI does not recognize V8 boot .. you cannot even make a back up from V8 before unlocking.. although i have unlocked a few of these.. there is still much risks.. because what if it dies? there is also no way to flash this with mss box because your precious GUI can not even read or support its ID i have desperately tried to get into synch with mss.. i always try to use this to master it's use to the fullest of it's ability/capabilities... for almost a year now have tried have you tried unlocking motorola z6 with your box? i have! but it fails.. but with my smartclip everything went well.. FIRST: PLEASE DO IMPROVE THINGS.. PLEASE READ THE PROBLEMS POSTED HERE IN YOUR AREA/SECTION EVEN IN THE SUPPORT YOUR PROVIDED . THEN YOU CAN FOCUS ON ADD-ONS br

12-14-2010, 04:04	#7 (permalink)
Celltronixz Junior Member Join Date: Feb 2010 Location: Philippines Posts: 38 Member: 1225331 Status: Offline Thanks Meter: 1	it's a great work!!! thank you mss! what a big surprise!!

12-14-2010, 04:18	#8 (permalink)
windman8 No Life Poster Join Date: Oct 2007 Location: CYCLONE IS THE BEST TOOL FOR N Posts: 797 Member: 614801 Status: Offline Thanks Meter: 134	sometimes mssbox is fail but me almost perpect?i unlock c139 formatt ffs?unloking v3re via testpoint ok?but we to thanks for this new added software ?not only mssbox can flash mottorolla?scout, amartclip many choices SW?

12-14-2010, 04:36	#9 (permalink)
byteforce Cheater -Don't Deal with him- Join Date: Feb 2003 Location: gsmcity Age: 44 Posts: 3,009 Member: 21296 Status: Offline Thanks Meter: 328	Where is LG U400 SEMC platform support? With this model I see that you offer nothing new in this field!!!

12-14-2010, 05:02	#10 (permalink)
snakebreeder No Life Poster Join Date: Apr 2008 Location: PILIPINAS Posts: 759 Member: 759375 Status: Offline Sonork: www.GSMPIONEER.com Thanks Meter: 895	NO ANSWERS here.......... ALSO NO WHERE TO FIND THE "PINOuts or definition of mssbox rj45" here errors were reported but no REPLY FROM OR TEAM http://forum.gsmhosting.com/vbb/f474...-here-1146373/ http://forum.gsmhosting.com/vbb/f474...m326g-1161506/ http://forum.gsmhosting.com/vbb/f474...-w220-1163196/ http://forum.gsmhosting.com/vbb/f474...-help-1158393/ http://forum.gsmhosting.com/vbb/f474...lp-my-1154125/ http://forum.gsmhosting.com/vbb/f474...ot-z8-1152573/ http://forum.gsmhosting.com/vbb/f474...-lock-1147815/ http://forum.gsmhosting.com/vbb/f474...ssbox-1147065/ http://forum.gsmhosting.com/vbb/f474...-w200-1144323/ http://forum.gsmhosting.com/vbb/f474...nlock-1141925/ EVEN IF YOU REPLY... it takes more than a day.......

12-14-2010, 05:28	#11 (permalink)
kinakatakutan Freak Poster Join Date: Dec 2006 Posts: 119 Member: 407813 Status: Offline Thanks Meter: 18	mssbox 2 - 80% negative feedback..