Problem with D600 IMEI - can't solve...

[ShaXX]

Hello!

I got one D600 which was hanging on bootscreen. I flashed it with D600B FW and now the phone is working again but the IMEI is now 0044.... and I want to restore it to org. IMEI again but it won't work.

I can flash it only with optiflash not with rocker. With rocker I only get this:

Samsung Module for Rocker Dongle (v1.33) - BETA

Loaded 720 models

Available COM ports:

Doing Job, Please Wait

ThreadGUI started
ThreadProtocol started
OS: NT family, Ver:5.1
Boot loader protocol type: passive
Memory interface type: 1
Setup loader: C:\Programme\Rocker Dongle\SamsungRocker\data\fsl3.sre
Setup loader base addr: 0x00000000
Flash loader: C:\Programme\Rocker Dongle\SamsungRocker\data\fl11.sre
Flash loader base addr: 0x30000000
Stack base addr: 0x20000000
Stack buffers: 2
0: 0x20000000 - 0x21ffffff [32 MB (33554432 Bytes)]
1: 0x28000000 - 0x2fffffff [128 MB (134217728 Bytes)]
Opened COM11 at 115200 baud
PC transfer speeds (COM11): 57600 115200 230400 460800 921600
Loading S-record file (RangeCheck=Off)
File: C:\Programme\Rocker Dongle\SamsungRocker\data\fsl3.sre
SRE line 181: IGNORING: S70500000000FA
There is 1 memory region in the S-record file:
1: 0x00000000 - 0x00000b3f = 2880 Bytes
Loading S-record file (RangeCheck=Off)
File: C:\Programme\Rocker Dongle\SamsungRocker\data\fl11.sre
SRE line 33704: IGNORING: S70530000000CA
There is 1 memory region in the S-record file:
1: 0x30000000 - 0x30083a6f = 539248 Bytes
Loading S-record file (RangeCheck=On)
File: D:\Eigene Dateien\HandySoftware\Samsung\Flashfiles\U600\U600 B\Neuer Ordner\U600BXFGL1_S3.s3
SRE line 3547: IGNORING: S70520020000D8
SRE line 3548: IGNORING: S00600004844521B
SRE line 90813: IGNORING: S705A002000058
SRE line 90814: IGNORING: S024000070616870655F726668656C696F7332705F6463786F 5F736B7937373532332E7333D1
SRE line 92003: IGNORING: S70520010000D9
SRE line 92004: IGNORING: S00600004844521B
SRE line 93528: IGNORING: S705A002000058
SRE line 93608: IGNORING: S70520040000D6
SRE line 93610: IGNORING: S70520000000DA
SRE line 1621533: IGNORING: S705201B0000BF
SRE line 1833441: IGNORING: S70521BB00001E
SRE line 3455242: IGNORING: S70528000000D2
There are 9 memory regions in the S-record file:
1: 0x20000000 - 0x20000007 = 8 Bytes
2: 0x20010000 - 0x20014a3f = 19008 Bytes
3: 0x20020000 - 0x2002dd93 = 56724 Bytes
4: 0x20040000 - 0x200404e3 = 1252 Bytes
5: 0x20042000 - 0x20196df3 = 1396212 Bytes
6: 0x201b0000 - 0x2190071f = 24446752 Bytes
7: 0x21bb0000 - 0x21eebc2f = 3390512 Bytes
8: 0x21f10000 - 0x21f15f2c = 24365 Bytes
9: 0x28000000 - 0x298bf273 = 25948788 Bytes
SendFile=C:\Programme\Rocker Dongle\SamsungRocker\data\fl11.sre, Mode=3
Power on mobile !
TalkToBootLoader (using COM11)
Talking to passive bootloader
Bootloader V1.0 using UART1
ROM mask ID: 0x00000000 ( )
ID register: 0x000200a3 (ES2)
Bootloader type: 6 (1)
Max. transfer size: 2176 bytes
Adjusted max. transfer size to: 1920 bytes
Data to transfer: 2880 bytes in 1 region(s)
Send: 0x00000000 - 0x0000077f (=1920)
Send: 0x00000780 - 0x00000b3f (=960)
Talking to setup loader

#
I'm using USB cable and phone in download mode (* and power on).

If I try IMEI repair (jaf with emulated com port) I get this:

Doing Job, Please Wait
Using \\.\COM6 port

Sending Request to phone
Phone Find - Speed: OK

TestMode: OK
HW revision: ÿÿÿÿÿÿÿÿ
SW version: U600BXFGL1
IMEI: 00440001693000-8
This phone not have MSL lock or MSL data is bad.
MSL code: Calculating

How to solve my Problem?? Phone is working fine except if the IMEI...

THX!

WBR
Shaxx

[ShaXX]

Legija, plz give me any suggestion what I can do!!!

[legija]

You need to write either full dump or eeprom dump to phone.
Doing so with Rocker is not possible if i remember well.