set define not working - GSM-Forum

bengok · 09-08-2008, 00:20

always i'm proses flashing not working in here why sir?

Welcome to uses VE-King box.
GuangZhou VicEasy. Http://www.VE100.com www.xintel.com.cn
comport:COM4
COM4 connect box success.
box ver:V1.5 fireware date:2008-07-11
box sn: xxxxxx manuf date:2008-07-16
Connecting QT-Dongles!
QT-Dongle Sn: xxxxxxxx Reg. Infor.:VicEasy0805
Dongle mainsoft Ver.:V1.0 compile Date:2007-11-23
data verify ok,thankyou!
-------------------
vcc and gnd read success!
VCC:14
short pin:7 - 8
fast mode Scan! (F4 break)
MTKchipset already connect to phone.
RXD:5 TXD:6
Scan Success time(s):0,325
-------------------
set define fail!
-------------------
vcc and gnd read success!
VCC:14
short pin:7 - 8
fast mode Scan! (F4 break)
MTKchipset already connect to phone.
RXD:5 TXD:6
Scan Success time(s):0,325
-------------------
>>set define fail!

please my best solution, thank's

Bonnie_xuan · 09-08-2008, 02:50

after you have pin out , cut off the power clips and set define.

mentari · 09-08-2008, 19:09

Quote:

Originally Posted by Bonnie_xuan

after you have pin out , cut off the power clips and set define.

yup, must disconnect cable and try to set define again.

09-08-2008, 00:20	#1 (permalink)
bengok Junior Member Join Date: Jun 2007 Posts: 18 Member: 524998 Status: Offline Thanks Meter: 11	set define not working always i'm proses flashing not working in here why sir? Welcome to uses VE-King box. GuangZhou VicEasy. Http://www.VE100.com www.xintel.com.cn comport:COM4 COM4 connect box success. box ver:V1.5 fireware date:2008-07-11 box sn: xxxxxx manuf date:2008-07-16 Connecting QT-Dongles! QT-Dongle Sn: xxxxxxxx Reg. Infor.:VicEasy0805 Dongle mainsoft Ver.:V1.0 compile Date:2007-11-23 data verify ok,thankyou! ------------------- vcc and gnd read success! VCC:14 short pin:7 - 8 fast mode Scan! (F4 break) MTKchipset already connect to phone. RXD:5 TXD:6 Scan Success time(s):0,325 ------------------- set define fail! ------------------- vcc and gnd read success! VCC:14 short pin:7 - 8 fast mode Scan! (F4 break) MTKchipset already connect to phone. RXD:5 TXD:6 Scan Success time(s):0,325 ------------------- >>set define fail! please my best solution, thank's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W490 after unlock Hand Set Speaker Not Working	Qaisar Mahmood	Smart-Clip	2	03-10-2010 13:27
W490 Hand Set Speaker Not Working	Qaisar Mahmood	Motorola Hardware Repair	0	03-10-2010 10:51
factort settings also not working bb5 mobiles	zakariya	Cyclonebox	2	08-30-2009 09:29
Please Help-- New Spice 404 Set Is Ok Working Good.doing Unlock Set Not Booting.	shahi	Infinity-Box	1	01-05-2008 12:46

09-08-2008, 02:50	#2 (permalink)
Bonnie_xuan Freak Poster Join Date: Jul 2008 Posts: 110 Member: 811759 Status: Offline Thanks Meter: 14	after you have pin out , cut off the power clips and set define.