HTC DESIRE HD dead

[Dudiso]

I was trying to unlock it by XTC clip and now its dead.
My Desire HD is booting but booting straigth to bootloader my computer recognises it as ADB device . please guide me how to repair it???

Thanks

[cellsolution]

Originally Posted by Dudiso

I was trying to unlock it by XTC clip and now its dead.
My Desire HD is booting but booting straigth to bootloader my computer recognises it as ADB device . please guide me how to repair it???

Thanks

I think no support hear for u dear. Hope raskal ill chk this out.

[gadzetxp]

If you enter into hboot is you can program it from the memory card.

1. Take gold card but remove from the file diag
2. then start the installer
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_ 26.04.02.17_M2_release_161342_signed.exe
3. Enter the temp files and find the file. NBH. copy to memory card and rename the PD98IMG.zip.
4. Enter the hboot, should start to program
5. How to do it this error pop up again
Important. Your version of the radio must match with what stretch of the exe file

helped in my desire alive. I had the radio version 26.04.02.17_M2

[Raskal]

Originally Posted by Dudiso

I was trying to unlock it by XTC clip and now its dead.
My Desire HD is booting but booting straigth to bootloader my computer recognises it as ADB device . please guide me how to repair it???

Thanks

your phone is not dead, you did not read the user manual of the clip also you did not watch the movies of the clip how to do it, you put the phone in flash mode instead of diagnostic mode and now phone wait to be flashed!

reflash your phone and all is okay

you post in gsmhosting, cannot expect support, this forum is manipulated and controlled by Zfrank and Zulea and their team ! your xtc clip software have link to xtc support forum, please use the link to it's support forum

B.R.,
Raskal

p.s. the clip cannot kill any phone because clip does not change any single byte in the phone software! All remains original. XTC clip is the only single unlocker on market who don't modify phone soft!

[akkay]

resurrect it with riff jtag...............

[Raskal]

Originally Posted by akkay

resurrect it with riff jtag...............

bro, RIFF BOX should be used ONLY when device has deleted boot, DEAD = NOT POWER ON any more, but his phone have boot, it is working, it's just stuck in flash mode until he flash it.

B.R.,
Raskal

[servicenavodari]

heheeeeeeee,
xtc clip is the best tool in the market for newest htc phones;
is also better than microbox.
Regards!

[cellsolution]

Originally Posted by akkay

resurrect it with riff jtag...............

riff Dont have its support chk Features « RIFF Box – JTAG Revolution

[cellsolution]

Originally Posted by Raskal

your phone is not dead, you did not read the user manual of the clip also you did not watch the movies of the clip how to do it, you put the phone in flash mode instead of diagnostic mode and now phone wait to be flashed!

reflash your phone and all is okay

you post in gsmhosting, cannot expect support, this forum is manipulated and controlled by Zfrank and Zulea and their team ! your xtc clip software have link to xtc support forum, please use the link to it's support forum

B.R.,
Raskal

p.s. the clip cannot kill any phone because clip does not change any single byte in the phone software! All remains original. XTC clip is the only single unlocker on market who don't modify phone soft!

Nice to listen that it dont make any single byte change.
& still unlockes Phone.
I think u need to have more knowledge for your product. If its not making any change it cant unlock it. As per my knowledge. May be u r expert but people over hear r not Fool........

[Raskal]

Originally Posted by cellsolution

[/B]


Nice to listen that it dont make any single byte change.
& still unlockes Phone.
I think u need to have more knowledge for your product. If its not making any change it cant unlock it. As per my knowledge. May be u r expert but people over hear r not Fool........

i don't think those people talking here about XTC clip are fool...
Wildfire General - xda-developers

[sandeep928]

I had same problem while unlocking with XTC clip, the phone just got in bootloader mode. Than i had updated my desire hd with orignal ROM.This problem had been faced by me in ORANGE & AT&T desire hd. Otherwise its wonderfull tool for unlock .I think there is some problem with XTC clip for desire hd only

[pcs1234]

i had the same problem with a desire hd ,it should have unlocked ,but didnt .then i couldnt get it out of bootload ,so with a lot of panic and turning off and taking out the battery .IT booted ,i spent 40 mins trying this, as i knew there was nothing being written to the phone with the xtc,so it had to work.Then i thought sod it try it again .and this time it would not boot into the software to clear the security .I tried different micro cards ,but it still wouldnt work .I can assume that the xtc has a problem with desire hd ,Any one managed to unlock one with xtc.Or is there a solution .

[raja16sep]

Originally Posted by pcs1234

i had the same problem with a desire hd ,it should have unlocked ,but didnt .then i couldnt get it out of bootload ,so with a lot of panic and turning off and taking out the battery .IT booted ,i spent 40 mins trying this, as i knew there was nothing being written to the phone with the xtc,so it had to work.Then i thought sod it try it again .and this time it would not boot into the software to clear the security .I tried different micro cards ,but it still wouldnt work .I can assume that the xtc has a problem with desire hd ,Any one managed to unlock one with xtc.Or is there a solution .

Hi Brother,
I am sorry with your case, Because i have done many Desir Hd without any problem , even today also have done one. If Supply to clip is ok (100%) and SD is ok then without any problem your phone will get unlock. Attach clip direct port of Computer.

Thnaks
Br, Raja

[sandeep928]

THE latest update of XTC clip have no problem with desire hd bcoz I had unlocked 1 desire hd locked to 3 network uk

[mobile tech!!]

i have a HTC HD dead.
1. no power
2. dont read on computer
3. try other battery nothing
4. no watr damage