Htc Wildfire s touch screen not working

[worldwideunlock]

Hi all,

I have Htc Wildfire s which had a cracked glass.
Touch screen was working but was damaged.

I replaced the Glass and now the touch screen doesn't work.
Not responding to touch.
Otherwise phone turns on ok.

I bought another touch screen revision 3 and still not working.
I also made a hard reset but it's the same.

Why the touch screen doesn't work? Althought I tried 2 touch screens.

What is the solution?

Best Regards

[reserve]

Originally Posted by worldwideunlock

Hi all,

I have Htc Wildfire s which had a cracked glass.
Touch screen was working but was damaged.

I replaced the Glass and now the touch screen doesn't work.
Not responding to touch.
Otherwise phone turns on ok.

I bought another touch screen revision 3 and still not working.
I also made a hard reset but it's the same.

Why the touch screen doesn't work? Althought I tried 2 touch screens.

What is the solution?

Best Regards

this phone has two types of touch w2 and w3

shall be adequate to touch version works

Best Regards

[cesarq]

you can try doing calibration. https://www.google.ee/webhp?sourceid...w=1366&bih=643

[worldwideunlock]

Originally Posted by Tommyservice

this phone has two types of touch w2 and w3

shall be adequate to touch version works

Best Regards

The one I have is revision 3, or version 3 and this one Im trying
but no joy.
Any other ideas? I'll make a picture of what is the original touch screen.

[worldwideunlock]

Originally Posted by cesarq

you can try doing calibration. https://www.google.ee/webhp?sourceid...w=1366&bih=643

Calibration doesn't work.
It says Update Fail.

[worldwideunlock]

Sorry for multiply posting but How to identify the proper version of the touch screen?

I get confused now with revision numbers. I got both for revision 3 and that's what says at the back of the ribbon for the cracked touch screen and the new ones.

[worldwideunlock]

Hi,

Just refreshing the thread.

Can anybody help me with this Htc Wildfire S digitizer?
I can't upload the picture of the back ribbon hence it's to small and hard to see.

At the back of the ribbon it says Rev 3, and the cracked one also has Rev 3.
Touch screen not responding.
I tried Hard Reset and also tried a reset with the micro sim - No joy.

Would you know what is the reason for Touch not working?
The cracked screen worked perfectly fine before opening the phone.

Thanks in advance

[The Repair Shop]

New faulty screen maybes?

[worldwideunlock]

Originally Posted by The Repair Shop

New faulty screen maybes?

Are you sure?
I try to press harder, sqeeze the screen and it is almost responding and sliding slightly, but a little bit. Maybe there is a gap between the screen and the digitizer, maybe that is the problem?

[reserve]

Originally Posted by worldwideunlock

Are you sure?
I try to press harder, sqeeze the screen and it is almost responding and sliding slightly, but a little bit. Maybe there is a gap between the screen and the digitizer, maybe that is the problem?

There is not much philosophy can only be a touch or in hardware in question

what are you up to now has changed on that phone touch w2, w3 version or?

give a little more information to my brother to help you if little information das

more info

[worldwideunlock]

Originally Posted by Tommyservice

There is not much philosophy can only be a touch or in hardware in question

what are you up to now has changed on that phone touch w2, w3 version or?

give a little more information to my brother to help you if little information das

more info

The Touch glass is version 3 (rev 3).
The one before that is cracked is also version 3 (rev 3).
The screen doesnt respond to touch.
I pressed harder and it started to respond, but only a little bit but not responding now again. The thing on the screen to slide down to Unlock it started to work but now won't slide down anymore.
I know that it should work fine but it doesn't, although I tried 2 touch screens. Im really getting sick of this phone.

[reserve]

Originally Posted by worldwideunlock

The Touch glass is version 3 (rev 3).
The one before that is cracked is also version 3 (rev 3).
The screen doesnt respond to touch.
I pressed harder and it started to respond, but only a little bit but not responding now again. The thing on the screen to slide down to Unlock it started to work but now won't slide down anymore.
I know that it should work fine but it doesn't, although I tried 2 touch screens. Im really getting sick of this phone.

That phone is normally a problem with regard to touch personally, I hate doing

The hardware in question is a flex slot or an EMI filter for touch and perhaps a framework could be

good luck
try new software...##



2------


HTC Wildfire Calibration






Wildfre S Touch Screen Calibration instructions.

WARNING: ALL YOUR PERSONAL DATA WILL BE LOST SO PLEASE BACKUP ANY IMPORTANT INFORMATION PRIOR TO THIS PROCEDURE

1. Please download the zip file named; "CalibrateWildfire.zip" at the end of this page.
2. Unzip the file into a folder
3. Copy the files into the root of your memory card (Do not place them in a folder)
4. Insert the memory card into your phone
5. Switch off the phone
6. With the phone switched off keep hold of the 'VOLUME DOWN' button and press the 'POWER' button once
7. Wait 10 seconds until screens displays "Get OEMSBL time out! ........... Press VOLDN to exit".
8. PRESS Volume Down button once
9. The screen will diplay "Vol-Dn=> DIAG" in red writing
10. PRESS Volume Down button once
11. At this point the digitizer will be calibrated. Let the process complete.
12. Once complete a screen will appear with the heading in blue "MAL SERVICE HDIAG 1.00"
13. You can now remove the battery and switch on the phone as normal and it should work fine.

NOTE:
- ALL PERSONAL DATA FROM PHONE MEMORY WILL BE ERASED.
- If the process is not working then the files have not been copied or the steps have not been followed correctly.
- This calibration software is ONLY for the HTC Wildfire phone and will not work on anything else.

[worldwideunlock]

Originally Posted by Tommyservice

That phone is normally a problem with regard to touch personally, I hate doing

The hardware in question is a flex slot or an EMI filter for touch and perhaps a framework could be

good luck
try new software...##



2------


HTC Wildfire Calibration






Wildfre S Touch Screen Calibration instructions.

WARNING: ALL YOUR PERSONAL DATA WILL BE LOST SO PLEASE BACKUP ANY IMPORTANT INFORMATION PRIOR TO THIS PROCEDURE

1. Please download the zip file named; "CalibrateWildfire.zip" at the end of this page.
2. Unzip the file into a folder
3. Copy the files into the root of your memory card (Do not place them in a folder)
4. Insert the memory card into your phone
5. Switch off the phone
6. With the phone switched off keep hold of the 'VOLUME DOWN' button and press the 'POWER' button once
7. Wait 10 seconds until screens displays "Get OEMSBL time out! ........... Press VOLDN to exit".
8. PRESS Volume Down button once
9. The screen will diplay "Vol-Dn=> DIAG" in red writing
10. PRESS Volume Down button once
11. At this point the digitizer will be calibrated. Let the process complete.
12. Once complete a screen will appear with the heading in blue "MAL SERVICE HDIAG 1.00"
13. You can now remove the battery and switch on the phone as normal and it should work fine.

NOTE:
- ALL PERSONAL DATA FROM PHONE MEMORY WILL BE ERASED.
- If the process is not working then the files have not been copied or the steps have not been followed correctly.
- This calibration software is ONLY for the HTC Wildfire phone and will not work on anything else.

I did try that but it said FAILED!

[reserve]

Originally Posted by worldwideunlock

I did try that but it said FAILED!

I really do not know what could be more thing that came to mind I told you already

I'm sorry

good luck

[worldwideunlock]

I tried the cracked touch screen today and it doesn't work either.
I bought the inner Lcd.
Hope that will help.
I'll let you know if that resolved the issue.

Thanks for your help.