*****Free Palm Pre Unlock ***** - GSM-Forum

Unlock_Master · 08-11-2011, 22:10

Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/
Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/
Install pyserial: http://sourceforge.net/projects/pyserial/files/
Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre)
Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.
Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
Connect your phone to your machine and install these drivers.
Run pre_unlock.py and write down your network unlock code.
Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

littmanr · 08-12-2011, 04:23

Sir, thanks, please upload unlocker on another site, rapidshare not allowed on my country.

BR

Unlock_Master · 08-12-2011, 21:26

Here u go

MEGAUPLOAD - The leading online storage and file delivery service

Unlock_Master · 08-12-2011, 21:37

Quote:

Originally Posted by mrkhanz

Here u go

MEGAUPLOAD - The leading online storage and file delivery service

http://forum.gsmhosting.com/vbb/f487...4/#post7622232

I post another thread check models which could possible unlock

tonygsm20 · 07-13-2012, 17:35

Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.

help ... I can not figure the USB passthrough code

Nosebolt · 07-26-2012, 13:25

worked fine for me

Thanks

billycomm · 07-26-2012, 14:26

hi,

can i download 3.2.3 or basically 2.6.x only

thanks

Nosebolt · 07-26-2012, 14:56

only the 2.6 worked for me

kagnassy · 10-06-2012, 14:55

giag driver please , .

babji · 10-15-2012, 09:11

https://sites.google.com/site/dogber...ru-drivers.zip

08-11-2011, 22:10	#1 (permalink)
Unlock_Master Freak Poster Join Date: Aug 2010 Posts: 220 Member: 1379587 Status: Offline Sonork: 100.1619552 Thanks Meter: 29	***Free Palm Pre Unlock *** Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/ Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/ Install pyserial: http://sourceforge.net/projects/pyserial/files/ Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre) Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number. Put your Palm Pre into USB Passthrough mode: enter "#USBPASS# (#8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1". Connect your phone to your machine and install these drivers. Run pre_unlock.py and write down your network unlock code. Disable the passthrough mode: enter "#USBPASS# (#8727277#) and press the dial icon again. Set "None" for "USB PORT 1". Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again. Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

08-12-2011, 04:23	#2 (permalink)
littmanr No Life Poster Join Date: Oct 2005 Posts: 668 Member: 190377 Status: Offline Thanks Meter: 61	Sir, thanks, please upload unlocker on another site, rapidshare not allowed on my country. BR

08-12-2011, 21:26	#3 (permalink)
Unlock_Master Freak Poster Join Date: Aug 2010 Posts: 220 Member: 1379587 Status: Offline Sonork: 100.1619552 Thanks Meter: 29	Here u go MEGAUPLOAD - The leading online storage and file delivery service

07-13-2012, 17:35	#5 (permalink)
tonygsm20 Freak Poster Join Date: Nov 2009 Location: Lima - Peru Posts: 199 Member: 1168095 Status: Offline Sonork: 100.1602891 Thanks Meter: 13	Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number. help ... I can not figure the USB passthrough code

07-26-2012, 13:25	#6 (permalink)
Nosebolt Freak Poster Join Date: May 2000 Age: 59 Posts: 133 Member: 1494 Status: Offline Thanks Meter: 8	worked fine for me Thanks

07-26-2012, 14:26	#7 (permalink)
billycomm Freak Poster Join Date: Oct 2006 Location: NIGERIA Posts: 268 Member: 380077 Status: Offline Sonork: 100.1601214 Thanks Meter: 55	hi, can i download 3.2.3 or basically 2.6.x only thanks

07-26-2012, 14:56	#8 (permalink)
Nosebolt Freak Poster Join Date: May 2000 Age: 59 Posts: 133 Member: 1494 Status: Offline Thanks Meter: 8	only the 2.6 worked for me

10-06-2012, 14:55	#9 (permalink)
kagnassy Junior Member Join Date: Jul 2009 Posts: 29 Member: 1083742 Status: Offline Sonork: 0022376011896 Thanks Meter: 4	giag driver please , .

10-15-2012, 09:11	#10 (permalink)
babji Freak Poster Join Date: Mar 2010 Posts: 270 Member: 1267882 Status: Offline Thanks Meter: 48	https://sites.google.com/site/dogber...ru-drivers.zip